Numerical Investigation of the Enhanced Stirring Characteristics of a Multi-Lance Top-Blowing Continuous Converting Furnace for Lance Arrangement and Variable-Velocity Blowing
Open Access
Abstract
Oxygen lances are key equipment for copper converters. The effect of the lance arrangement on the mixing of a gas–slag two–phase is discussed using numerical simulation and experimental verification with a water model, and the stirring characteristics enhanced by variable–velocity blowing are explored. The results showed that the single–row lance arrangement (SA) increased the average velocity in the slag phase by 17.93% and reduced the disturbance to the metal phase by 27.78% compared to the double–row lance arrangement (DA). Compared to the constant–velocity blowing system (CSB), the sine–wave blowing system (SWB) and rectangular–wave blowing system (RWB) increased the average velocity in the slag phase by 24.03% and 13.96%, respectively, and reduced the proportion of the low–velocity area by more than 46.2%. The velocity imbalance in the SA local area enhances the mixing of the gas–slag two–phase. The variable–speed blowing improves the mass transfer and mixing effect.Keywords
Funding Information
- National Natural Science Foundation of China (No. 52166004, 202101AU070031, No. 2021J0063)
- Natural Science Foundation of Yunnan Province (No. 52166004, 202101AU070031, No. 2021J0063)
- Scientific Research Fund Project of Yunnan Education Department, China (No. 52166004, 202101AU070031, No. 2021J0063)
This publication has 21 references indexed in Scilit:
- Numerical simulation of gas-liquid mixed top blowing to enhance momentum diffusionApplied Thermal Engineering, 2020
- Extension of Lance Life by Change of Height of Lances in the Smelting Furnace of Mitsubishi ProcessMetals and Materials International, 2020
- Computational Fluid Dynamics Study on a Top-Blown Smelting Process with Lance Failure in an Isa FurnaceJOM, 2019
- Modeling of Mixing Behavior in a Combined Blowing Steelmaking Converter with a Filter-Based Euler–Lagrange ModelJOM, 2018
- Water model experiments of multiphase mixing in the top-blown smelting process of copper concentrateInternational Journal of Minerals, Metallurgy and Materials, 2016
- Numerical analysis on fluid flow and heat transfer in the smelting furnace of mitsubishi process for Cu refiningMetals and Materials International, 2015
- Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF ProcessMetallurgical and Materials Transactions B, 2015
- Modelling of fluid flow phenomena in Peirce-Smith copper converters and analysis of combined blowing conceptJournal of the Southern African Institute of Mining and Metallurgy, 2015
- Numerical simulation of gas and liquid flow in steelmaking converter with top and bottom combined blowingIronmaking & Steelmaking: Processes, Products and Applications, 2013
- Modelling of mixing, mass transfer and phase distribution in a Peirce–Smith converter modelCanadian Metallurgical Quarterly, 2013