Jianhang Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianhang Hu has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
Hua Wang
Engineering Research Center of Metallurgical Energy Conservation and Emission Reduction, Ministry of Education, Kunming University of Science and Technology, Kunming, China
11 shared publicationsHuili Liu
5 shared publicationsFengxia Zhang
Engineering Research Center of the Ministry of Education for Metallurgical Energy Conservation and Emission Reduction, Kunming University of Science and Technology, Kunming 650093, Yunnan Province, PR China; Kunming Metallurgy College, 650033 Kunming, PR China
4 shared publicationsYong Yu
Engineering Research Center of Metallurgical Energy Conservation and Emission Reduction, Ministry of Education, Kunming University of Science and Technology, Kunming, China
4 shared publicationsCheng Tan
Engineering Research Center of Metallurgical Energy Conservation and Emission Reduction, Ministry of Education, Kunming University of Science and Technology, Kunming, China
3 shared publicationsChaowei Ma
Kunming Univ Sci & Technol, Engn Res Ctr, Minist Educ Met Energy Conservat & Emiss Reduct, Kunming 650093, Yunnan, Peoples R China
2 shared publications
Latest Publications
- 24 April 2026
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 12 (3) , 3181-3199
Turbulence Modulation via Internal Baffles for Intensified Slag-Matte Separation in Gas-Stirred Reactors
- 24 April 2026
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 12 (3) , 3181-3199
Turbulence Modulation via Internal Baffles for Intensified Slag-Matte Separation in Gas-Stirred Reactors
- 17 December 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 501, 140855
A sustainable strategy for efficient arsenic reduction, detoxification, and environmental assessment during the high-value utilization of multi-metallic tailings
- 17 December 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 501, 140855
A sustainable strategy for efficient arsenic reduction, detoxification, and environmental assessment during the high-value utilization of multi-metallic tailings
- 29 August 2025
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 46 (11) , 1-22
Investigation on the Thermal Conductivity of the Molten Copper Slag Cooling and Solidification Process
- 29 August 2025
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 46 (11) , 1-22
Investigation on the Thermal Conductivity of the Molten Copper Slag Cooling and Solidification Process
- Open Access
- 11 June 2025
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 13, 1603584
Effect of acid washing and torrefaction combined pretreatment on the properties of waste tobacco stem biomass and the quality of pyrolysis bio-oil
Aiming at the issues of low yield and poor quality of bio-oil obtained from direct pyrolysis of biomass, in this study, waste tobacco stems (TS) were used as raw materials, and the pretreatment methods of torrefaction and acid washing were adopted to study the effects of different torrefaction temperatures and pretreatment sequences on the quality of TS biomass and bio-oil. Results showed that combined pretreatment synergistically integrated deoxygenation from torrefaction and deashing from acid washing. High-temperature torrefaction-based combined pretreatment reduced TS oxygen content from 54.83% to 20.14%. Acid washing pretreatment achieved more than 90% removal of inorganic elements (K, Cl and Mg). The order of combined pretreatment also had an important influence on biomass pyrolysis. Torrefaction-acid washing pretreatment decreased ash content of TS, increased the relative content of sugars and aromatic compounds in bio-oil, reduced alcohols and ketones relative contents, and improved bio-oil higher heating value (HHV) and pH. Acid washing-torrefaction pretreatment enhanced bio-oil productivity, increased nitrogen-containing compounds and phenols relative content, reduced acids and aldehydes contents, and lowered bio-oil water and ash contents. Additionally, with the increase in torrefaction temperature, the O/C molar ratio of TS decreased, the HHV of TS increased, and the thermal cracking of nicotine in bio-oil to generate pyridine compounds was promoted. This study demonstrates a viable pathway to convert TS into high-quality fuels and bio-oil via combined pretreatment, offering new insights for optimizing biomass pyrolysis technology and enhancing resource utilization efficiency.
- 11 June 2025
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 13, 1603584
Open AccessEffect of acid washing and torrefaction combined pretreatment on the properties of waste tobacco stem biomass and the quality of pyrolysis bio-oil
Aiming at the issues of low yield and poor quality of bio-oil obtained from direct pyrolysis of biomass, in this study, waste tobacco stems (TS) were used as raw materials, and the pretreatment methods of torrefaction and acid washing were adopted to study the effects of different torrefaction temperatures and pretreatment sequences on the quality of TS biomass and bio-oil. Results showed that combined pretreatment synergistically integrated deoxygenation from torrefaction and deashing from acid washing. High-temperature torrefaction-based combined pretreatment reduced TS oxygen content from 54.83% to 20.14%. Acid washing pretreatment achieved more than 90% removal of inorganic elements (K, Cl and Mg). The order of combined pretreatment also had an important influence on biomass pyrolysis. Torrefaction-acid washing pretreatment decreased ash content of TS, increased the relative content of sugars and aromatic compounds in bio-oil, reduced alcohols and ketones relative contents, and improved bio-oil higher heating value (HHV) and pH. Acid washing-torrefaction pretreatment enhanced bio-oil productivity, increased nitrogen-containing compounds and phenols relative content, reduced acids and aldehydes contents, and lowered bio-oil water and ash contents. Additionally, with the increase in torrefaction temperature, the O/C molar ratio of TS decreased, the HHV of TS increased, and the thermal cracking of nicotine in bio-oil to generate pyridine compounds was promoted. This study demonstrates a viable pathway to convert TS into high-quality fuels and bio-oil via combined pretreatment, offering new insights for optimizing biomass pyrolysis technology and enhancing resource utilization efficiency.
- 3 May 2025
- Published by Elsevier in Bioresource Technology
- Vol. 431, 132616
Targeted conversion of furfural from waste wood via catalyzed pyrolysis of acid-leaching residue
- 3 May 2025
- Published by Elsevier in Bioresource Technology
- Vol. 431, 132616
Targeted conversion of furfural from waste wood via catalyzed pyrolysis of acid-leaching residue
- 12 November 2024
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 10 (4) , 2657-2667
Preparing 5N Selenium from Crude Selenium Using a Simple Oxidation–Atmospheric Sublimation–Dissolution–Reduction Method
- 12 November 2024
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 10 (4) , 2657-2667
Preparing 5N Selenium from Crude Selenium Using a Simple Oxidation–Atmospheric Sublimation–Dissolution–Reduction Method
- Open Access
Numerical Investigation of the Enhanced Stirring Characteristics of a Multi-Lance Top-Blowing Continuous Converting Furnace for Lance Arrangement and Variable-Velocity Blowing
Oxygen lances are key equipment for copper converters. The effect of the lance arrangement on the mixing of a gas–slag two–phase is discussed using numerical simulation and experimental verification with a water model, and the stirring characteristics enhanced by variable–velocity blowing are explored. The results showed that the single–row lance arrangement (SA) increased the average velocity in the slag phase by 17.93% and reduced the disturbance to the metal phase by 27.78% compared to the double–row lance arrangement (DA). Compared to the constant–velocity blowing system (CSB), the sine–wave blowing system (SWB) and rectangular–wave blowing system (RWB) increased the average velocity in the slag phase by 24.03% and 13.96%, respectively, and reduced the proportion of the low–velocity area by more than 46.2%. The velocity imbalance in the SA local area enhances the mixing of the gas–slag two–phase. The variable–speed blowing improves the mass transfer and mixing effect.
Open AccessNumerical Investigation of the Enhanced Stirring Characteristics of a Multi-Lance Top-Blowing Continuous Converting Furnace for Lance Arrangement and Variable-Velocity Blowing
Oxygen lances are key equipment for copper converters. The effect of the lance arrangement on the mixing of a gas–slag two–phase is discussed using numerical simulation and experimental verification with a water model, and the stirring characteristics enhanced by variable–velocity blowing are explored. The results showed that the single–row lance arrangement (SA) increased the average velocity in the slag phase by 17.93% and reduced the disturbance to the metal phase by 27.78% compared to the double–row lance arrangement (DA). Compared to the constant–velocity blowing system (CSB), the sine–wave blowing system (SWB) and rectangular–wave blowing system (RWB) increased the average velocity in the slag phase by 24.03% and 13.96%, respectively, and reduced the proportion of the low–velocity area by more than 46.2%. The velocity imbalance in the SA local area enhances the mixing of the gas–slag two–phase. The variable–speed blowing improves the mass transfer and mixing effect.
- 28 June 2022
- Published by Elsevier in Bioresource Technology
- Vol. 360, 127539
Thermogravimetric pyrolysis kinetics study of tobacco stem via multicomponent kinetic modeling, Asym2sig deconvolution and combined kinetics
- 28 June 2022
- Published by Elsevier in Bioresource Technology
- Vol. 360, 127539
Thermogravimetric pyrolysis kinetics study of tobacco stem via multicomponent kinetic modeling, Asym2sig deconvolution and combined kinetics