Nonlinear estimation model of minimum void ratio for sand–silt mixtures
Authors:
- 18 November 2019
- journal article
- research article
- Published by Taylor & Francis in Marine Georesources & Geotechnology
- Vol. 39 (2) , 176-187
Abstract
Previous experimental studies on sand–silt mixtures have shown that silty fines significantly affect the soil fabric and resulting mechanical behavior. Some bilinear models have been proposed to capture minimum and maximum void ratios. In this study, previously reported data from 37 soil mixtures including coastal sands with 338 individual specimens for which the minimum void ratios are available were studied. The results helped form the basis to develop a nonlinear model capable of estimating the shape of the minimum void ratio curve of the sand–silt mixtures. The equations of minimum void ratios were derived for soil mixtures in coarse and fine grain dominant regions. The results show that the predicted values of minimum void ratios by quadratic polynomial equations agree well with the measured data; the root mean square error is 0.03. The proposed model only requires one data point from the experimental test to predict the minimum void ratio for any soil mixture with various fine contents.Keywords
This publication has 32 references indexed in Scilit:
- Modeling of minimum void ratio for sand–silt mixturesEngineering Geology, 2015
- Fall cone tests on clay–sand mixturesEngineering Geology, 2015
- Dominant grains network and behavior of sand–silt mixtures: stress–strain modelingInternational Journal for Numerical and Analytical Methods in Geomechanics, 2012
- Effect of Particle Shape on the Engineering Properties of Granular Soils2009
- Modified state parameter for characterizing static liquefaction of sand with finesCanadian Geotechnical Journal, 2009
- Soil type effects on petroleum contamination characterization using ultraviolet induced fluorescence excitation-emission matrices (EEMs) and parallel factor analysis (PARAFAC)Journal of Environmental Engineering and Science, 2008
- Maximum and Minimum Void Ratio Characteristics of SandsSoils and Foundations, 2002
- Effect of fines on instability behaviour of loose sandGéotechnique, 2002
- Static liquefaction as a possible explanation for the Merriespruit tailings dam failureCanadian Geotechnical Journal, 2001
- Concrete Mixture Proportioning1999