Assessment of Contact Laws Accounting for Softening in 3D Rigid Concrete Particle Models
Open Access
Abstract
To obtain predictions closer to concrete behaviour, it is necessary to employ a particle model (PM) that considers contact softening. A bilinear softening contact model (BL) has been adopted in PM studies. Several limitations in PM predictions have been identified that may be due to BL assumptions. For this reason, this paper compares BL predictions with those obtained with more complex models to assess if PM predictions can be improved. As shown, it is possible to calibrate each contact model to reproduce the complex behaviour observed in concrete in uniaxial and biaxial loading. The predicted responses are similar, and the known PM limitations still occur independently of the adopted model. Under biaxial loading, it is shown that a response closer to that observed in concrete can be obtained (higher normal-to-stiffness ratio of ≈0.50, maximum contact compressive strength of ≈60 MPa, and 30% reduction in the number of working contacts). The BL contact model for PM concrete DEM-based simulations is shown to have (i) lower associated computational costs (15% to 50% lower); (ii) a reduced number of contact strength parameters; and (iii) similar responses to those predicted with more complex models. This paper highlights that the BL contact model can be used with confidence in PM fracture studies.Keywords
This publication has 44 references indexed in Scilit:
- Numerical study of the mechanical behaviour of unwelded block in matrix rocks under direct shearingBulletin of Engineering Geology and the Environment, 2023
- Micro‐mechanical analysis of one‐dimensional compression of clay with DEMInternational Journal for Numerical and Analytical Methods in Geomechanics, 2023
- Coupled elasto-softening contact models in DEM to predict the in-plane response of masonry wallsComputational Particle Mechanics, 2023
- Evaluation of dynamic tensile strength of concrete using lattice-based simulations of spalling testsInternational Journal of Fracture, 2020
- A three-dimensional meso-scale approach to concrete fracture based on combined DEM with X-ray μCT imagesCement and Concrete Research, 2018
- Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. I: TheoryCement and Concrete Composites, 2011
- A Discrete Element Model for Predicting Shear Strength and Degradation of Rock Joint by Using Compressive and Tensile Test DataRock Mechanics and Rock Engineering, 2011
- A non‐linear interface element for 3D mesoscale analysis of brick‐masonry structuresInternational Journal for Numerical Methods in Engineering, 2010
- On the application of a discrete model to the fracture process of cohesive granular materialsGranular Matter, 2002
- Determination of fracture zone properties in mixed mode I and IIEngineering Fracture Mechanics, 1990