Combined evaluation of oscillatory rheometry and isothermal calorimetry for the monitoring of hardening stage of Portland cement compositions blended with bauxite residue from Bayer process generated in different sites in Brazil
Authors:
- Roberto Cesar de Oliveira RomanoRRRoberto Cesar de Oliveira Romano
- José Augusto Ferreira Sales de MesquitaJMJosé Augusto Ferreira Sales de Mesquita
- Heitor Montefusco BernardoHBHeitor Montefusco Bernardo
- Danilo Aguiar NizaDNDanilo Aguiar Niza
- Marcel Hark MacielMMMarcel Hark Maciel
- Maria Alba CincottoMCMaria Alba Cincotto
- Rafael Guiliano PileggiRPRafael Guiliano Pileggi
Open Access
- 1 January 2021
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 14 (2)
Abstract
Bauxite residue (BR), a by-product of alumina and aluminum production, consists of high aluminum, silica, and iron content, and sodium from the bauxite ore digestion during the Bayer process. This waste is still being disposal into the lakes of mud, causing some environmental problems. So, the search for its application has gained interest. Studies reported in literature point out that one of the most promising applications is in association with Portland cement, which can also help to reduce the environmental impact caused by the CO2-emissions in its production. In this work, a combined evaluation of oscillatory rheometry and isothermal calorimetry was performed for the monitoring of the hardening stage of Portland cement (PC) compositions blended with BR generated in different sites in Brazil. The time-sweep test was applied to obtain the consistency gain of suspensions over-time, allowing us to understand the physical parameters of consolidation, while the changes in the hydration reaction showed considerable differences in the chemical contribution. As a conclusion, it was clear the impact of each BR, mainly due to the aspects related to soluble aluminates, silicates, and sodium, which in association with the soluble ions from PC, affected the chemical reaction and agglomeration/flocculation forces of particles.Keywords
This publication has 29 references indexed in Scilit:
- Bauxite residue in cement and cementitious applications: Current status and a possible way forwardResources, Conservation and Recycling, 2013
- Hydration mechanisms of ternary Portland cements containing limestone powder and fly ashCement and Concrete Research, 2011
- Early age hydration and pozzolanic reaction in natural zeolite blended cements: Reaction kinetics and products by in situ synchrotron X-ray powder diffractionCement and Concrete Research, 2010
- Early hydration and setting of oil well cementCement and Concrete Research, 2010
- Application of Bayer red mud for iron recovery and building material production from alumosilicate residuesJournal of Hazardous Materials, 2009
- Thermal behaviour of clay mixtures with bauxite residue for the production of heavy-clay ceramicsJournal of the European Ceramic Society, 2007
- Modeling the influence of limestone filler on cement hydration using CEMHYD3DCement and Concrete Composites, 2006
- Red mud addition in the raw meal for the production of Portland cement clinkerJournal of Hazardous Materials, 2004
- Porosity, pore size distribution and in situ strength of concreteCement and Concrete Research, 2003
- Preparation of special cements from red mudWaste Management, 1996