RRRoberto Cesar de Oliveira Romano

Roberto Cesar de Oliveira Romano

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Roberto Cesar de Oliveira Romano has a total of 73 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Computational fluid dynamics analysis of single-point rheological tests for assessing cementitious material workability

    by Amanda Sayuri Oizuni, Beatriz Cortez Rodriguez dos Santos, Fábio Cunha Lofrano, Roberto Cesar de Oliveira Romano, Renata Monte, Fernando Akira Kurokawa


  • Development and Construction of Heavy-Traffic Pavements Made with Concrete Containing Bauxite Residue

    by de Oliveira Romano, Roberto Cesar, Markus Samuel Rebmann, Rafael Giuliano Pileggi

  • Open Access

    Impact of bauxite residue and fly ash on Portland cement hydration

    by Luana Maria Vilaça da Silveira, Roberto Cesar de Oliveira Romano, Maria Alba Cincotto, Rafael Giuliano Pileggi

    The use of by-products from industrial processes, such as bauxite residue (BR) and fly ash (FA), as SCMs with Portland cement is a strategy that promotes waste reuse and reduces cement production’s environmental impact. Additionally, a ternary system fosters chemical interactions among materials, mitigating BR’s harmful effects (leaching of hazardous elements and high alkalinity) without requiring energy-intensive processes. This study evaluates the influence of BR and FA on Portland cement hydration through three systems: a reference paste (cement only), two binary pastes (70% cement, 30% SCM), and a ternary paste (70% cement, 15% BR, and 15% FA). The hydration process was analyzed using isothermal calorimetry, XRD, and TGA. Results show SCMs accelerate hydration, shortening induction periods and increasing reaction rates. FA, with its high shape factor, enhances early hydration by facilitating hydrate precipitation, while BR contributes chemically, increasing Portlandite and chemically bound water. Both SCMs accelerate hydration through the filler effect due to their larger specific surface areas. These findings highlight the potential of ternary systems for the safe, sustainable application of SCMs in construction.


  • Open Access

    Early-age monitoring of cement-microcement compositions: combined evaluation of chemical reaction and viscoelastic changes during the hardening

    by José Augusto Ferreira de Mesquita, Marcel Hark Maciel, Thiago Ricardo Santos Nobre, Roberto Cesar de Oliveira Romano, Rafael Giuliano Pileggi

    Enhancing cement efficiency in concrete and mortar is crucial for reducing the environmental impact of construction by minimizing binder consumption without compromising performance. This study examines the reaction kinetics and hardening of pastes made with two types of Portland cement, each with distinct particle size distributions and mineralogical characteristics. The chemical contribution to hardening was monitored using isothermal calorimetry, while in-situ X-ray diffraction was used to monitor the formation of hydrated compounds. Physical changes were assessed by oscillatory rheometry, focusing on the elastic storage modulus (G’). The detected proportions of portlandite and ettringite influenced the initial reaction stages but had little effect on heat release. The combined analysis reveals the correlation between physicochemical parameters and microstructural changes, emphasizing their role in agglomeration and flocculation forces that accelerate paste hardening.


  • Open Access

    Characterization of fresh and hardened state properties of grouts for use in structural masonry

    by José Augusto Ferreira Sales de Mesquita, Mércia Maria Semensato Bottura de Barros, Luiz Sérgio Franco, Rafael Giuliano Pileggi, Roberto Cesar de Oliveira Romano

    Grout is a kind of construction material used for many applications in civil engineering and can be defined as a fluid mortar or a low-viscosity micro-concrete used to fill voids, with maximum size aggregates (MSA) of 9.5 mm [1 1 E. H. Cunha, “Análise experimental do comportamento de prismas grauteados em alvenaria estrutural,” Master thesis, Univ. Fed. Goiás, Goiânia, GO, Brazil, 2001. ]-[4 4 J. S. Camacho, B. G. Logullo, G. A. Parsekian, and P. R. N. Soudais, “The influence of grouting and reinforcement ratio in the concrete block masonry compressive behavior,” Rev. IBRACON Estrut. Mater., vol. 8, pp. 341-364, Jun. 2015, http://dx.doi.org/10.1590/S1983-41952015000300006. http://dx.doi.org/10.1590/S1983-41952015... ]. In addition to structurally enhanced masonry, other relevant grout applications include its use for stabilization of soils and rocks [5 5 U. Müller, L. Miccoli, and P. Fontana, “Development of a lime based grout for cracks repair in earthen constructions,” Constr. Build. Mater., vol. 110, pp. 323-332, May 2016, http://dx.doi.org/10.1016/j.conbuildmat.2016.02.030. http://dx.doi.org/10.1016/j.conbuildmat.... ], for injection to fill cracks in concrete structures [6 6 M. M. S. Lacerda, T. J. Silva, G. M. S. Alva, and M. C. V. Lima, “Influence of the vertical grouting in the interface between corbel and beam in beam-to-column connections of precast concrete structures - an experimental analysis,” Eng. Struct., vol. 172, pp. 201-213, Oct. 2018, http://dx.doi.org/10.1016/j.engstruct.2018.05.113. http://dx.doi.org/10.1016/j.engstruct.20... 7 N. Tullini and F. Minghini, “Grouted sleeve connections used in precast reinforced concrete construction - experimental investigation of a column-to-column joint,” Eng. Struct., vol. 127, pp. 784-803, Nov. 2016, http://dx.doi.org/10.1016/j.engstruct.2016.09.021. http://dx.doi.org/10.1016/j.engstruct.20... 8 G. Sipp and G. A. Parsekian, “Investigation of the adherence between clay blocks and grouts,” Rev. IBRACON Estrut. Mater., vol. 15, pp. e15112, Aug. 2021, http://dx.doi.org/10.1590/S1983-41952022000100012. http://dx.doi.org/10.1590/S1983-41952022... ]-[9 9 O. S. Izquierdo, M. R. S. Corrêa, and I. I. Soto, “Study of the block/grout interface in concrete and clay block masonry structures,” Rev. IBRACON Estrut. Mater., vol. 10, pp. 924-936, Aug. 2017, http://dx.doi.org/10.1590/S1983-41952017000400009. http://dx.doi.org/10.1590/S1983-41952017... ], for coating cables in precast constructions, to fill post-tensioning cable ducts, and soil stabilization near the tunnels.


  • Hy_Surf model: Viscoelastic evolution in Portland cement suspensions during the early-age hardening

    by Marcel Hark Maciel, Roberto Cesar de Oliveira Romano, Rafael Giuliano Pileggi


  • Open Access

    Effect of prehydration of Portland cement on the superplasticizer consumption and the impact on the rheological properties and chemical reaction

    by Danila Fabiane Ferraz, Ariane Carolina Rodrigues Martho, Elizabeth Gertrude Burns, Roberto Cesar de Oliveira Romano, Rafael Giuliano Pileggi

    The use of pre-hydrated cement in formulation of mortar and concrete is common because there is not always effective control on the cement production, grinding, transportation and subsequent storage. This paper presents a case study on the optimization of admixture for use with prehydrated cement by assessing changes in the rheological properties of Portland cement artificially pre-hydrated. The cement was artificially pre-hydrated by exposure to relative humidity (RHs) of 90%, in an environment of NH4Cl saturated solution. Additionally, the cement pastes were evaluated with and without superplasticizer. Stepped flow test using a parallel-plate geometry was the method choose to evaluate the rheological behavior, apparent viscosity, yield stress and hysteresis area of each paste at the early age. Oscillatory rheometry was conducted to evaluate the storage modulus (G’), comparing the consolidation with the hydration kinetics obtained by calorimetric evaluation of the same suspensions. Initial rheometer results indicate that the pre-hydrated sample presents lower level of shear stress than the reference sample, because of the higher reactivity of the non-pre-hydrated sample.


  • Open Access

    Evaluation of rheological properties of mortar with TiO2 addition

    by Sérgio Roberto Andrade Dantas, Francisco Jordão Nunes de Lima, Roberto Cesar de Oliveira Romano, Rafael Pileggi, Kai Loh

    Adding TiO2 tocoating mortars is carried out to promote self-cleaning through photocatalytic activity. However, this addition influences the workability of the mortar and, consequently, the application stage as the TiO2 used can present a large number of fine particles and a high surface area, increasing the demand for mixing water, requiring consistency adjustments before coating. In this work, three mortars (two with the addition of different types of TiO2 and one reference) were developed on a laboratory scale to maintain similar workability, using the flow table test. The amount of kneading water was changed to maintain a spread of 220 ± 10 mm and the content of air-entrained was kept constant, around 25%. The mortars were evaluated using the squeeze flow method. Then, a blind test was performed to assess the mason sensitivity during handling and application of the coating, and all mortars were considered similar. However, the yield of the compositions with TiO2 addition was lower compared to the reference composition, making it possible to explain the results based on the physical parameters of the formulations and with a more in-depth analysis of the rheological indices obtained by the squeeze flow test.


  • Open Access

    Combined evaluation of oscillatory rheometry and isothermal calorimetry for the monitoring of hardening stage of Portland cement compositions blended with bauxite residue from Bayer process generated in different sites in Brazil

    by Roberto Cesar de Oliveira Romano, José Augusto Ferreira Sales de Mesquita, Heitor Montefusco Bernardo, Danilo Aguiar Niza, Marcel Hark Maciel, Maria Alba Cincotto, Rafael Guiliano Pileggi

    Bauxite residue (BR), a by-product of alumina and aluminum production, consists of high aluminum, silica, and iron content, and sodium from the bauxite ore digestion during the Bayer process. This waste is still being disposal into the lakes of mud, causing some environmental problems. So, the search for its application has gained interest. Studies reported in literature point out that one of the most promising applications is in association with Portland cement, which can also help to reduce the environmental impact caused by the CO2-emissions in its production. In this work, a combined evaluation of oscillatory rheometry and isothermal calorimetry was performed for the monitoring of the hardening stage of Portland cement (PC) compositions blended with BR generated in different sites in Brazil. The time-sweep test was applied to obtain the consistency gain of suspensions over-time, allowing us to understand the physical parameters of consolidation, while the changes in the hydration reaction showed considerable differences in the chemical contribution. As a conclusion, it was clear the impact of each BR, mainly due to the aspects related to soluble aluminates, silicates, and sodium, which in association with the soluble ions from PC, affected the chemical reaction and agglomeration/flocculation forces of particles.


  • Fe2O3-doped SnO2 membranes with enhanced mechanical resistance for ultrafiltration application

    by Debora C.O.S. Neves, Andre L. da Silva, Roberto Cesar de Oliveira Romano, Douglas Gouvêa