Optimization of Analytical TSFs for DC-Link Current Reduction in Switched Reluctance Motors
Open Access
- 12 August 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 5, 356-368
Abstract
The large DC-link current is a known issue in switched reluctance motor drives, which often demand the use of a bulky DC-link capacitor. However, control techniques can be designed and optimized to lessen this issue. In this context, this paper proposes the optimization of analytical torque sharing functions for DC-link current reduction in SRMs. Initially, the analytical TSFs are described, and the importance of adequate parameter selection is highlighted. Next, an optimization procedure based on the non-dominated sorting genetic algorithm II (NSGA-II) is proposed to determine the optimal turn-on and overlap angles by solving a multiobjective optimization problem considering torque RMS error and DC-link RMS current as objectives to be minimized, something not previously reported in the literature. The pareto fronts for different operating conditions are presented, including both soft and hard chopping operation, as well as different sampling frequencies. Then, an approach for selecting a solution from within the pareto front is described, enabling the result from the pareto front that yielded the desired trade-off between torque RMSE and DC-link current to be identified. Experimental results are provided to support the effectiveness of the proposal. A comparison between three different cases is shown, highlighting the trade-off between objectives.Keywords
Funding Information
- Mitacs and industrial partner Enedym
This publication has 31 references indexed in Scilit:
- A Review on Switched Reluctance Generators in Wind Power Applications: Fundamentals, Control and Future TrendsIEEE Access, 2022
- Geometry and Topology Optimization of Switched Reluctance Machines: A ReviewIEEE Access, 2022
- Advanced Control of Switched Reluctance Motors (SRMs): A Review on Current Regulation, Torque Control and Vibration SuppressionIEEE Open Journal of the Industrial Electronics Society, 2021
- A Methodology to Determine the Effect of a Novel Modulation in the Reliability of an Automotive DC-Link CapacitorIEEE Access, 2020
- Synchronized Switching Modulation to Reduce the DC-Link Current in SRM DrivesIEEE Access, 2020
- Direct Torque Control Based on a Fast Modeling Method for a Segmented-Rotor Switched Reluctance Motor in HEV ApplicationIEEE Journal of Emerging and Selected Topics in Power Electronics, 2019
- A Review of the Condition Monitoring of Capacitors in Power Electronic ConvertersIEEE Transactions on Industry Applications, 2016
- An Offline Torque Sharing Function for Torque Ripple Reduction in Switched Reluctance Motor DrivesIEEE Transactions on Energy Conversion, 2015
- Reliability of Capacitors for DC-Link Applications in Power Electronic Converters—An OverviewIEEE Transactions on Industry Applications, 2014
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002