CFCesar José Volpato Filho

Cesar José Volpato Filho

*This is an algorithmically generated author record based on publicly available information.

Cesar José Volpato Filho has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optimized Discrete-Time LQI Current Control for Indirect Torque Regulation of Switched Reluctance Motors

    by Gustavo Xavier Prestes, Filipe Pinarello Scalcon, Cesar José Volpato Filho, Gaoliang Fang Fang, Rodrigo Padilha Vieira

    Torque ripple remains a key challenge in switched reluctance motors (SRMs) due to their highly nonlinear magnetic characteristics. In order to achieve improved torque smoothness, this article proposes an enhanced discrete-time current controller based on Linear Quadratic Integral (LQI) regulation, combined with an offline Torque Sharing Function to enable indirect torque control. A performance-oriented optimization methodology is introduced, where the weighting matrices of the LQI formulation are tuned using a Genetic Algorithm to balance current tracking accuracy and control effort. The proposed controller consistently maintains low root-mean-square errors in both current and torque across a wide range of speeds and load conditions, while ensuring torque smoothness. Such performance is sustained throughout all operating points, despite the highly nonlinear and strongly speed/load/position-dependent behavior of the SRM. The strategy also presents high robustness to parametric uncertainty, maintaining closed-loop stability under inductance variations of up to $\pm$50% relative to the design model. Furthermore, its reduced computational burden makes it suitable for lower-cost processors or multidrive applications. Experimental results validate the effectiveness of the proposed strategy, demonstrating reduced torque ripple and current-tracking error under both steady-state and dynamic conditions.


  • Multisegment Adaptive Current Control of Switched Reluctance Motors

    by Cesar José Volpato Filho, Gaoliang Fang, Filipe Pinarello Scalcon, Andrew M. Knight, Rodrigo Padilha Vieira

    Achieving high-performance current tracking is essential for the proper implementation of torque sharing functions (TSFs) in switched reluctance motor (SRM) drives. However, the inherent nonlinearities of SRMs create significant challenges for this precise current control. Thus, this article proposes a multisegment adaptive current controller that addresses these challenges. First, the constraints and limitations of standard linear control for SRM drives are investigated, where it becomes clear that both the nonlinear motor characteristics and variant current references make accurate current control a difficult task. To overcome these issues, the proposed controller divides the operating range into multiple segments, each with distinct PI gains. An adaptive algorithm continuously refines these gains, enhancing control accuracy without relying on a predefined motor model, unlike traditional gain-scheduling techniques. Experimental validation on a four-phase 8/6 SRM demonstrates the effectiveness of the controller across different operating points, confirming its suitability for high-performance SRM drives.

  • Open Access

    A Fast Firing Angle Optimization Approach for Current-Controlled Switched Reluctance Generators in Wind Power Applications

    by Filipe P. Scalcon, Gustavo X. Prestes, Gaoliang Fang, Cesar J. Volpato, Hilton A. Grundling, Rodrigo P. Vieira, Andrew M. Knight

    The adequate choice of excitation parameters is detrimental to the high performance operation of switched reluctance generators. Such task, however, is a complex problem which lacks solutions with simple analytical formulations. In this context, this paper presents a performance optimization procedure for switched reluctance generators operating in the current controlled region, below base speed. The proposal allows optimal firing angles to be determined based on the particle swarm optimization algorithm. A cost function is designed as a means to ensure performance with a compromise between reduced torque ripple and increased energy efficiency. A comparison with a traditional exhaustive search algorithm is provided, highlighting the reduced computational complexity of the proposal. Moreover, an original statistical analysis is presented as a means to demonstrate the low dispersion of the PSO-based procedure. Experimental results are provided in order to demonstrate the performance of the wind energy conversion system operating with optimal parameters.


  • Open Access

    Optimization of Analytical TSFs for DC-Link Current Reduction in Switched Reluctance Motors

    by Filipe Pinarello Scalcon, Gaoliang Fang, Cesar José Volpato Filho, Sumedh Dhale, Babak Nahid-Mobarakeh

    The large DC-link current is a known issue in switched reluctance motor drives, which often demand the use of a bulky DC-link capacitor. However, control techniques can be designed and optimized to lessen this issue. In this context, this paper proposes the optimization of analytical torque sharing functions for DC-link current reduction in SRMs. Initially, the analytical TSFs are described, and the importance of adequate parameter selection is highlighted. Next, an optimization procedure based on the non-dominated sorting genetic algorithm II (NSGA-II) is proposed to determine the optimal turn-on and overlap angles by solving a multiobjective optimization problem considering torque RMS error and DC-link RMS current as objectives to be minimized, something not previously reported in the literature. The pareto fronts for different operating conditions are presented, including both soft and hard chopping operation, as well as different sampling frequencies. Then, an approach for selecting a solution from within the pareto front is described, enabling the result from the pareto front that yielded the desired trade-off between torque RMSE and DC-link current to be identified. Experimental results are provided to support the effectiveness of the proposal. A comparison between three different cases is shown, highlighting the trade-off between objectives.


  • An Asymmetric Five-Level Flying Capacitor Converter with PWM Current Control for Switched Reluctance Motors

    by Filipe P. Scalcon, Gaoliang Fang, Cesar J. Volpato Filho, Hilton A. Gründling, Rodrigo P. Vieira, Babak Nahid-Mobarakeh

    An asymmetric five-level flying capacitor converter with PWM current control for SRMs is analyzed in this paper. First, the switching states as well as their impact on the flying capacitor voltage are presented in detail. Next, a modulation technique with capacitor voltage balancing capabilities, as well as a robust fixed switching frequency current control strategy are described. Simulation results are presented as a means to show the feasibility of the proposal. Moreover, a comparison with an asymmetric half-bridge converter is presented.


  • Study on QEMF Model and Adaptive Full-Order Observer Design for Universal Sensorless Control of IPMSMs

    by Cesar José Volpato Filho, Gaoliang Fang, Filipe Pinarello Scalcon, Rodrigo Padilha Vieira, Babak Nahid-Mobarakeh

    Quadratic extended electromotive force (QEMF) model enabled the use of traditional high-speed adaptive estimation methods combined to high-frequency signal injection (HFSI) for full-range sensorless position control of interior permanent magnet synchronous motors (IPMSMs). However, the first QEMF model presented in literature only works with HFSI in the q-axis, due to the QEMF being a function of the q-axis current derivative. The q-axis HFSI is known to produce undesired torque ripple. Furthermore, q-axis signal injection can be insufficient for low-speed position estimation in IPMSMs with low salience. A recent study demonstrated that the QEMF concept can be modeled as a function of the d-axis current derivative. In this paper, the influence of d-axis HFSI on QEMF is investigated and compared to the q-axis HFSI method. Furthermore, the electromotive force based observers are usually designed for medium to high-speed operation. Here, the adaptive full-order observer is adapted in order to achieve universal sensorless control through QEMF based d-axis HFSI. The state observer and adaptive law are designed by a cascade methodology, which guarantees accurate EEMF estimation and robustness throughout the entire operating speed range. Experimental results are presented in order to validate the proposed method and analysis under full-range sensorless control.


  • A Unified Wide-Speed Range Sensorless Control Method for Switched Reluctance Machines Based on Unsaturated Reluctance

    by Gaoliang Fang, Filipe P. Scalcon, Cesar J. Volpato Filho, Dianxun Xiao, Babak Nahid-Mobarakeh, Ali Emadi

    A unified unsaturated-reluctance-based wide speed range sensorless control method for switched reluctance machines (SRMs) is proposed in this article. First, the sensitivity analysis of the estimated position to the possible reluctance calculation error is analyzed. This analysis reveals the feasible regions with low sensitivity and low risk of entering saturation. Then, the unsaturated reluctance in these feasible regions is obtained and modeled. A simple second-order rational expression is proposed to fit the highly nonlinear unsaturated reluctance curve. With this simple model, the rotor position can be analytically calculated only by solving a simple quadratic problem. Based on the abovepresented analysis, a wide-speed range sensorless control is developed. The rotor position is universally estimated from the real-time reluctance value and the proposed analytical model. The high-frequency voltage injection and normal conduction phase are combined to calculate the phase reluctance over the wide-speed range. The concerns of calculating reluctance at the low-speed range are also discussed. A 5.1 kW four-phase 8/6 SRM is used to verify the proposed method. Various steady state and transient state experimental results prove the effectiveness of the proposed sensorless control method.


  • Open Access

    A Review on Switched Reluctance Generators in Wind Power Applications: Fundamentals, Control and Future Trends

    by Filipe P. Scalcon, Gaoliang Fang, Cesar J. Volpato Filho, Hilton A. Gründling, Rodrigo P. Vieira, Babak Nahid-Mobarakeh

    With the ever growing environmental concerns, renewable energy sources emerge as a promise of clean and abundant energy, enabling long-term sustainable development. In this context, wind power gained significant interest due to its relative low cost and availability. Switched reluctance generators (SRGs) are suitable candidates for wind energy conversion systems, as they present a simple structure, robustness, a wide range of speed and are capable of operating in harsh environments. The machine, however, poses challenges such as high torque ripple, acoustic noise production and highly nonlinear behavior. Nonetheless, with the use of adequate control strategies, high dynamic performance SRG-based wind energy conversion systems can be achieved. As a result, this article presents a state of the art review of SRGs in wind power applications. First, the fundamentals of the SRG are presented. Next, two categories of firing angle control are reviewed: optimization and closed-loop control. Then, voltage and power control strategies are discussed, being divided in model-independent and model-based approaches. After that, a review on grid-tied SRG-based wind energy conversion systems is carried out. The most common filter topologies as well as the employed control strategies are detailed. Lastly, an outline of the discussed topics is presented and future trends as well as suggestions for future investigation are listed.


  • Top Cited Papers
    Open Access

    Observers for High-Speed Sensorless PMSM Drives: Design Methods, Tuning Challenges and Future Trends

    by Cesar Jose Volpato Filho, Dianxun Xiao, Rodrigo Padilha Vieira, Ali Emadi

    Rotor position and speed estimation methods are consolidated to reduce the cost and volume of permanent magnet synchronous motor (PMSM) sensorless control drives while maintaining high performance. Advanced nonlinear algorithms require accurate design for precise estimation tracking throughout the entire PMSM operation range. This paper presents a broad review of the main high-speed estimation methods for sensorless PMSM drives. First, the stability constraints and design methodologies of the main estimation techniques presented in the literature are discussed. In the second part, it is investigated the new observer design trends, which are used under non-ideal conditions, such as robustness to distortions, the effects of parameter variation, sensorless parameter estimation, and low sampling-frequency-to-speed ratio operation. Future trends on the design of observers for high-speed sensorless PMSM drives are also discussed.