An Attempt to Reduce Materials Cost of Autoclaved Aerated Concrete Production
Authors:
- Zhijuan WangZWZhijuan Wang
- Yuanming SongYSYuanming Song
- Baoling LiBLBaoling Li
Open Access
- 31 May 2016
- journal article
- Published by Bentham Science Publishers Ltd. in The Open Civil Engineering Journal
- Vol. 10 (1) , 323-333
Abstract
Background: Municipal solid waste incineration (MSWI) bottom ash contains a not insignificant amount of metallic aluminum, while circulating fluidized bed combustion (CFBC) fly ash is rich in active SiO 2. Objective: To reduce the materials cost of autoclaved aerated concrete (AAC) production, these two types of solid waste could theoretically be used as the aerating agent and silica source, respectively. Method: In the present work, the metallic aluminum concentration in an MSWI bottom ash sample was determined from hydrogen generation and this ash was used to make AAC in conjunction with CFBC fly ash. The extent of air entrainment in the resulting AAC specimens was varied by changing the bottom ash to fly ash ratio, and the effects of this ratio on the properties of the AAC were investigated. Results: Results showed that the ratio has a negligible effect on both the type and the morphology of the hydrates in the AAC, but is inversely proportional to the compressive strength, density and volume stability. Conclusion: This study proves that AAC having satisfactory properties can be successfully prepared from a combination of MSWI bottom ash and CFBC fly ash.Keywords
This publication has 16 references indexed in Scilit:
- Feasibility study on utilization of municipal solid waste incineration bottom ash as aerating agent for the production of autoclaved aerated concreteCement and Concrete Composites, 2015
- Effect of autoclave curing on hydration of anhydrite in CFBC fly ashMagazine of Concrete Research, 2015
- Investigations of anhydrite in CFBC fly ash as cement retardersConstruction and Building Materials, 2013
- Utilization of municipal solid waste incineration bottom ash in blended cementJournal of Cleaner Production, 2012
- Combined use of MSWI bottom ash and fly ash as aggregate in concrete formulation: Environmental and mechanical considerationsJournal of Hazardous Materials, 2009
- Characteristics of municipal solid wastes incineration (MSWI) fly ash–cement matrices and effect of mineral admixtures on composite systemConstruction and Building Materials, 2009
- Recycling MSWI bottom and fly ash as raw materials for Portland cementWaste Management, 2008
- Utilisation of MSWI bottom ash as sub-base in road construction: First results from a large-scale test siteJournal of Hazardous Materials, 2007
- Metallic aluminum in MSWI fly ash: quantification and influence on the properties of cement-based productsWaste Management, 2004
- Reactivity of calcium sulfate from FBC systemsFuel, 1997