Optical and Thermal Performance Enhancement of a Parabolic Trough Solar Collector With Helical Turbulators and Modified Receiver Geometries
- 4 May 2026
- journal article
- Published by Wiley in Heat Transfer
- Vol. 55 (5) , 3364-3385
Abstract
Enhancing the thermal efficiency of parabolic trough solar collectors (PTCs) is vital for optimizing concentrated solar power systems and industrial solar thermal applications. Conventional receiver tubes often suffer from limited internal heat transfer and uneven solar flux distribution, reducing energy conversion efficiency. This study presents a comprehensive numerical investigation of PTC receivers with modified tube geometries ‐circular, elliptical, and hexagonal‐integrated with internal helical turbulators. Optical performance was evaluated using Monte Carlo Ray Tracing (MCRT) to determine solar flux distribution and identify optimal receiver eccentricities, while thermal–hydraulic behavior was assessed via computational fluid dynamics (CFD) simulations over Reynolds numbers from 3000 to 11,000. Optimal eccentricities were determined as −12, −8, and −12 mm for circular, elliptical, and hexagonal tubes, respectively. The elliptical tube achieved the highest optical interception, with an average intercept factor of 80.13%. The introduction of helical turbulators significantly enhanced heat transfer, increasing Nusselt numbers by 31%, 45%, and 46% for circular, elliptical, and hexagonal tubes, respectively. Corresponding friction factor ratios ranged from 1.6 to 2.0, highlighting the trade‐off between heat transfer improvement and flow resistance. Overall, the elliptical receiver with a small‐pitch helical turbulator delivered the best combined thermo‐optical performance.Keywords
This publication has 39 references indexed in Scilit:
- Thermo‐Economic Assessment of Tracked‐Tilted Tubular Solar Still Equipped With Heat Pipe and Dual‐Line Focal ConcentratorsHeat Transfer, 2025
- Optical and Thermal Performance of a Parabolic Trough Collector for Different Receiver GeometriesArabian Journal for Science and Engineering, 2022
- Effect of receiver geometry on the optical and thermal performance of a parabolic trough collectorHeat Transfer, 2022
- An extensive review of various technologies for enhancing the thermal and optical performances of parabolic trough collectorsInternational Journal of Energy Research, 2020
- Enhancing the performance of a parabolic trough collector with combined thermal and optical techniquesApplied Thermal Engineering, 2020
- Effects of critical geometric parameters on the optical performance of a conical cavity receiverFrontiers in Energy, 2019
- Experimental study of heat transfer and friction factor inside elliptic tube fixed with helical coilsApplied Thermal Engineering, 2018
- Optimal thermal and thermodynamic performance of a solar parabolic trough receiver with different nanofluids and at different concentration ratiosApplied Energy, 2017
- Solar Energy Utilization and Its Collection Devices2017
- A new k-ϵ eddy viscosity model for high reynolds number turbulent flowsComputers & Fluids, 1995