A CFD‐based design scheme for the perforated distributor with the control of radial flow
- 21 December 2019
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 66 (5)
Abstract
In the present study, flow homogenization by distributors in chemical apparatus is studied as a process of flow control and its mechanism is reconsidered from the model of resistance to the model of radial flow. This process is composed of four consecutive behaviors: the generation, distribution, conversion of the radial flow and the momentum transfer of axial flow. Based on these flow behaviors, the novel distributor is designed as the combination of perforated plate in the center area and vertical guiding baffles around. Taking the wire‐screen catalytic reactor as a case study, numerical simulation is employed to optimize the structure of distributor and a CFD‐based design scheme called “flow field analysis scheme” is proposed. Numerical simulation is conducted in the apparatus with a diffuser (inlet D0 = 500 mm, main part D1 = 3,000 mm) under the gas velocity of 3.6 m/s (corresponding Re ≈ 12,000). The numerical results from optimized distributor show that compared with the traditional perforated plate, the flow field adjusted by the novel distributor can achieve a better flow uniformity with lower energy consumption. The theoretical analysis and numerical results are also validated and proved by the experimental results.Keywords
This publication has 27 references indexed in Scilit:
- Role of hydrodynamics on chemical reactor performanceCurrent Opinion in Chemical Engineering, 2013
- Single-phase fluid flow distribution and heat transfer in microstructured reactorsChemical Engineering Science, 2011
- Estimations of Gas Flow Maldistribution in Packed‐Bed ColumnsChemical Engineering & Technology, 2008
- Experimental investigation of header configuration on flow maldistribution in plate-fin heat exchangerApplied Thermal Engineering, 2003
- Scaling-up Effect in Chemical EngineeringTheoretical Foundations of Chemical Engineering, 2002
- Gas flow distribution in packed columnsChemical Engineering and Processing - Process Intensification, 2002
- Similarity and scale-up1991
- Review of various Types of Flow Maldistribution in Heat ExchangersHeat Transfer Engineering, 1988
- Effect of flow maldistribution on conversion and selectivity in radial flow fixed‐bed reactorsAIChE Journal, 1979
- Flow maldistribution in packed beds: A comparison of measurements with predictionsAIChE Journal, 1975