Luminescent 3D printed poly(lactic acid) nanocomposites with enhanced mechanical properties
- 12 May 2023
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 63 (7) , 2059-2072
Abstract
The three‐dimensional (3D) printing of functional composite materials has gained tremendous interest in recent years. Nevertheless, research on 3D printing of luminescent composite materials is very limited, and the mechanical properties of such 3D‐printed composites are poor. Herein, we report the preparation and characterization of a poly(lactic acid) (PLA) composite that, when 3D printed, exhibits enhanced toughness and high solid‐state fluorescence quantum yield. Incorporation of only 1 wt% pyrene butyric acid modified cellulose nanofibers (PBA‐m‐CNF) and l0 wt% thermoplastic polyurethane (TPU) into PLA led to 223% increase in toughness and 21% increase in tensile modulus of PLA. Scanning electron microscopy (SEM) and X‐ray microcomputed tomography (μ‐CT) analysis of the fractured cross‐sections of 3D printed composites revealed a ductile failure mode. The PLA/PBA‐m‐CNF1/TPU10 3D printed composite also exhibited a high solid‐state fluorescence quantum yield of 38.35%. To the best of our knowledge, this is the first report to show both enhanced mechanical properties and high solid‐state fluorescence emission for 3D printable PLA. Such functional PLA composites could have potential applications in the fabrication of complex‐shaped sensors, optical light pipes, etc.Keywords
Funding Information
- Department of Chemicals and Petrochemicals, Ministry of Chemicals and Fertilizers, India
This publication has 42 references indexed in Scilit:
- 3D printing of wood fibre biocomposites: From mechanical to actuation functionalityMaterials & Design, 2016
- Rheology, thermal properties, and foaming behavior of high d -content polylactic acid/cellulose nanofiber compositesRSC Advances, 2015
- Effects of halloysite nanotubes on the performance of plasticized poly(lactic acid)‐based compositesPolymer Composites, 2015
- The morphology, properties, and shape memory behavior of polylactic acid/thermoplastic polyurethane blendsPolymer Engineering & Science, 2014
- Mechanical and thermal properties of thermoplastic polyurethane‐toughened polylactide‐based nanocompositesPolymer Composites, 2013
- Characterization of thermoplastic polyurethane/polylactic acid (TPU/PLA) tissue engineering scaffolds fabricated by microcellular injection moldingMaterials Science and Engineering: C, 2013
- Effects of thermoplastic polyurethane on the properties of poly(lactic acid)/organo‐montmorillonite nanocomposites based on novel vane extruderPolymer Engineering & Science, 2013
- Pyrene-POSS nanohybrid as a dispersant for carbon nanotubes in solvents of various polarities: its synthesis and application in the preparation of a composite membraneDiscover Nano, 2012
- A novel composite coupled hardness with flexibleness—polylactic acid toughen with thermoplastic polyurethaneJournal of Applied Polymer Science, 2011
- Simple Method for the Esterification of Carboxylic AcidsAngewandte Chemie International Edition, 1978