Formability of adhesive-bonded steel sheets with artificial finite adhesive defects
- 17 January 2014
- journal article
- research article
- Published by SAGE Publications in The Journal of Strain Analysis for Engineering Design
- Vol. 49 (5) , 286-300
Abstract
In this investigation, the influence of artificial finite adhesive defects with different shapes and sizes, characterized by (1) aspect ratios, a/b = 0.5, 1 and 1.5 (where a is transverse axis length of defect; b is longitudinal axis length of defect), (2) number of defects and (3) different locations, in the epoxy adhesive layer on the formability of adhesive-bonded blanks, is analysed. The deep drawing quality cold-rolled steel and stainless steel (SS 316L) sheets were used as base materials. The increase in aspect ratio of adhesive defect reduces the ductility of adhesive layer and thereby decreases the formability of adhesive-bonded blanks. This is due to the early failure of adhesive layer at the location of defect where strain is locally concentrated. The strain hardening exponent (n) of adhesive-bonded blanks has decreased with increase in aspect ratio of adhesive defect in all the regions of deformation. The limit strain of deep drawing quality and SS 316L sheets constituting adhesive-bonded blanks shows decrement with increase in aspect ratio of adhesive defect. It is postulated that the aspect ratio of the finite adhesive defect influences significantly the formability of adhesive-bonded blanks, but not shape of the finite adhesive defects. There is no considerable effect of number of adhesive defects and different locations of adhesive defects on the formability of adhesive-bonded blanks.Keywords
This publication has 15 references indexed in Scilit:
- Strength of single lap joints with artificial defectsInternational Journal of Adhesion and Adhesives, 2013
- Investigation on the influence of adhesive properties on the formability of adhesive-bonded steel sheetsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013
- Analysis of adhesive-bonded single-lap joint with an interfacial crack and a voidInternational Journal of Adhesion and Adhesives, 2011
- The formability of aluminum foam sandwich panelsInternational Journal of Material Forming, 2011
- Experimental and numerical investigation of the influence of imperfect bonding on the strength of NCF double-lap shear jointsComposite Structures, 2010
- Theoretical and experimental formability study of two-layer metallic sheet (Al1100/St12)Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008
- Cavity growth from crack-like defects in soft materialsInternational Journal of Fracture, 2004
- The influence of circular centered defects on the performance of carbon–epoxy single lap jointsPolymer Testing, 2002
- How defects in an adhesive layer influence the fatigue strength of bonded steel‐sheet specimensFatigue & Fracture of Engineering Materials & Structures, 1999
- Observations in the structural response of adhesive bondline defectsInternational Journal of Adhesion and Adhesives, 1999