A 3-D-Printed Lens Antenna With Tunable Varifocal Based on the Moiré Effect
- 12 April 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (8) , 2301-2305
Abstract
In this letter, a novel millimeter-wave (MMW) lens antenna (LA) using Moiré dielectric lenses (MDLs) based on the Moiré effect is proposed. The MDLs operate at 94 GHz , composed of two phase-complementary dielectric lenses. They facilitate different focal lengths of Fresnel lens phase distribution through the rotation of lenses, thereby enabling continuously adjusted focal lengths. The dielectric element, a simple rectangular dielectric post with a square hole, achieves a 360° linear transmission phase by altering the height of the pillars. Photocuring three-dimensional (3D) printing was used to illustrate the potential of lens antennas with constantly changeable focal lengths. Simulations demonstrate the reflection coefficient of the MDLs antenna in the W-band is below -20 dB. At 94 GHz, the focal length can be continuously adjusted from 46 mm to 186 mm. The measured results match the theoretical and predicted values rather well. According to the measured result, the power density can grow up to a maximum of 6 dB at the focus. The MDLs proposed in this letter have the advantages of simple design and low cost, offering new possibilities for further near-field focusing (NFF) antenna systems.Keywords
Funding Information
- National Key Research and Development Program of China (G072022YFF0707601)
- China Postdoctoral Science Foundation (2022M720664)
- National Natural Science Foundation of China (T2241002, 32000914, 61921002, 62171098, 61988102)
- Municipal Government of Quzhou (2022D007)
This publication has 25 references indexed in Scilit:
- Efficient Compact Radiative Near-Field Wireless Power Transfer to Miniature Biomedical ImplantsIEEE Antennas and Wireless Propagation Letters, 2023
- Varifocal Metalens for Optical Sectioning Fluorescence MicroscopyNano Letters, 2021
- A Circularly Polarized 3-D Printed Dielectric Transmitarray Antenna at Millimeter-Wave BandIEEE Antennas and Wireless Propagation Letters, 2021
- 3-D Printed Terahertz Lens for Bessel Beam Generation2019
- 3D‐printed 4‐zone Ka‐band Fresnel lens: design, fabrication, and measurementIET Microwaves, Antennas & Propagation, 2019
- Wireless Power Transfer in the Radiative Near FieldIEEE Antennas and Wireless Propagation Letters, 2016
- Performance of Directional and Omnidirectional Antennas in Wideband Head ImagingIEEE Antennas and Wireless Propagation Letters, 2016
- Beam Steering Phased Array Antenna With Fully Printed Phase Shifters Based on Low-Temperature Sintered BST-Composite Thick FilmsIEEE Microwave and Wireless Components Letters, 2015
- Dual Purpose Near- and Far-Field UHF RFID Coil Antenna With Non-Uniformly Distributed-TurnsIEEE Antennas and Wireless Propagation Letters, 2015
- The grooved‐dielectric Fresnel zone plate: An effective terahertz lens and antennaMicrowave and Optical Technology Letters, 2012