Abstract
Aluminum matrix composites (AMCs) offer high specific stiffness and strength, making them attractive for lightweight automotive applications. This study investigates AA6082-based AMCs reinforced with SiC for automotive damper systems, using a twin-tube rear-axle damper demonstrator to enable a component-oriented assessment beyond material characterization. Three damper components-an extruded structural tube, a piston rod, and a guide assembly-were manufactured using powder metallurgical routes, including high-energy ball milling, powder extrusion, and field-assisted sintering. The components were characterized regarding microstructure, mechanical performance, surface topography, and tribological behavior and compared with steel components.The results show that extruded AMC tubes exhibit homogeneous microstructures, low anisotropy, and mechanical properties suitable for structural damper components. The guide assembly produced by field-assisted sintering exceeded the specified compressive load and demonstrated reproducible behavior, achieving a mass reduction of up to 66 %. For the piston rod, mass reductions of up to 50 % were achieved; however, maximum bending stress criteria were not fulfilled without system-level modifications. Surface engineering strategies, including coating concepts, were therefore investigated.Overall, the results demonstrate that AMCs should be regarded as multifunctional design materials rather than direct steel substitutes, offering significant potential when component geometry, surface engineering, and system design are adapted concurrently.

This publication has 8 references indexed in Scilit: