Mechanical Properties of Multi-Sized Porous Thermal Barrier Coatings at Micro and Nano Scales after Long-Term Service at High Temperature
Open Access
Abstract
Atmospheric plasma-sprayed multi-sized porous structures in thermal barrier coatings (TBCs) were constructed with hollow spherical (HOSP) 8YSZ powders and polypropylene pore formers. The mechanical properties of the multi-sized TBCs were investigated through the nanoindentation method as comparations of the as-sprayed coating and those serving at 1100 °C for a long-term. The results showed that the introduction of the multi-sized pores into TBCs could lead to the decrease of the hardness and modulus as well as the increase of fracture toughness. The hardness and modulus of the coating increased, and the fracture toughness of the coating decreased with the prolongation of the serving times at high temperatures. The mechanical properties of the coating became stable after 60 days’ serving at 1100 °C. The hardness, elastic modulus and fracture toughness of the TBCs increased to 6.51, 7.79, 10.04 GPa and 126.36, 135.13, 145.22 GPa as well as 1.049, 1.157, 1.255 MPa·m0.5, respectively, corresponding to the multi-sized porous TBCs with 0%, 10% and 15% PP powders. The nano-size pores disappeared gradually in the multi-sized TBCs during serving at 1100 °C. The macropores deposited between the ceramic particles penetrated with little diffusion and were not easy to disappear. The introduction of a multi-scale pore structure into the TBCs could improve the stress-strain tolerance of the TBCs.Keywords
Funding Information
- National Natural Science Foundation of China (51771140)
- China Scholarship Council (201908610115)
- Shaanxi Key Science and Technology Innovation Team (2017KCT-05)
- The Youth Innovation Team of Shaanxi Universities (Metal Corrosion Protection and Surface Engineering Technology)
- Shaanxi Provincial Key Research and Development Project (2019ZDLGY05-09)
- Local Serving Special Scientific Research Projects of Shaanxi Provincial Department of Education (19JC022)
- Project of Yulin Science and Technology Bureau (2019-121)
This publication has 42 references indexed in Scilit:
- A novel low-thermal-conductivity plasma-sprayed thermal barrier coating controlled by large poresSurface and Coatings Technology, 2016
- An analysis of the particulate flow in cold spray nozzlesMechanical Sciences, 2015
- Nanomechanical behavior of yttria stabilized zirconia (YSZ) based thermal barrier coatingCeramics International, 2015
- Determination of high temperature mechanical properties of thermal barrier coatings by nanoindentationSurface Engineering, 2014
- Microstructural characterization of porous thermal barrier coatings by IR gas porosimetry and sintering forecastsActa Materialia, 2013
- Thermal-barrier coatings for more efficient gas-turbine enginesMRS Bulletin, 2012
- An investigation on oxidation, hot corrosion and mechanical properties of plasma-sprayed conventional and nanostructured YSZ coatingsSurface and Coatings Technology, 2011
- Hot Corrosion of Lanthanum Zirconate and Partially Stabilized Zirconia Thermal Barrier CoatingsJournal of Engineering for Gas Turbines and Power, 2004
- Materials Design for the Next Generation Thermal Barrier CoatingsAnnual Review of Materials Research, 2003
- Microstructure, composition and property relationships of plasma-sprayed thermal barrier coatingsSurface and Coatings Technology, 1992