Study on the Relationship between the Relative Molecular Mass of a Polymer Clay Stabilizer and the Permeability of a Tight Reservoir
Open Access
- 12 July 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (29) , 25751-25759
Abstract
Water-sensitivity damage is inevitable during hydraulic fracturing for tight reservoir stimulation. A polymer clay stabilizer is the most effective and commonly used agent for reducing this kind of permeability damage. However, due to the small pore throat radii of tight reservoirs, polymers may be captured and detained, resulting in secondary permeability damage caused by polymer plugging. Therefore, it is necessary to clarify the matching relationship between the relative molecular mass of the clay stabilizer and the permeability of tight cores, which has not been reported yet. In response to this problem, the residual resistance factor and the permeability damage rate of PDMDAAC (poly dimethyl diallyl ammonium chloride, a kind of commonly used polymer clay stabilizer) to tight cores from Xinjiang Oilfield were investigated in cores with permeabilities of 0.10 x 10(-3 )mu m(2) (0.08-0.17 x 10(-3) mu m(2)), 0.05 x 10(-3) mu m(2) (0.035-0.065 x 10(-3) mu m(2)), and 0.01 x 10(-3) mu m2 (0.007-0.020 x 10(-3) mu m(2)) through flow experiments. It was found that the relative molecular masses of PDMDAAC, which did not cause obvious core permeability damage, should be less than 10 000, 5000, and 2000, respectively. In addition, the bridging flocculation principle between the hydrodynamics radius of the clay stabilizer and the radius of the tight core pore throat can be used to explain the matching relationship between the relative molecular mass of the polymer clay stabilizer and the permeability of the tight reservoir. This study points out the direction for the optimization of the polymer clay stabilizer used in tight reservoir hydraulic fracturing and provides some references for the construction of hydraulic fracturing fluid systems for the efficient development of unconventional oil and gas resources.Keywords
Funding Information
- National Natural Science Foundation of China (52174058)
- Key Laboratory of Well Stability and Fluid and Rock Mechanics in Oil and Gas Reservoir, Xi'an Shiyou University (WSFRM20210603001)
- Jiangsu Key Laboratory of Oil-Gas Storage and Transportation Technology, Changzhou University (CDYQCY202001)
- Jiangsu Province (202110292025Z, 202110292043Y, 202110292066Y)
- Changzhou Municipality (CJ20200066)
This publication has 20 references indexed in Scilit:
- Optimization of Mercury Intrusion Capillary Pressure Measurement for Characterizing the Pore Structure of Tight RocksJournal of Nanoscience and Nanotechnology, 2017
- Impact of water blocking in fractures on the performance of hydraulically fractured horizontal wells in tight gas reservoirJournal of Petroleum Science and Engineering, 2017
- Experimental study on microscopic formation damage of low permeability reservoir caused by HPG fracturing fluidJournal of Natural Gas Science and Engineering, 2016
- Minimize Formation Damage in Water-Sensitive Unconventional Reservoirs by Using Energized Fracturing Fluid2016
- Hydraulic Fracturing with Water-Based Fluids in Water-Sensitive Formations2013
- Laboratory animals as surrogate models of human obesityActa Pharmacologica Sinica, 2012
- Relative Permeability from Capillary Pressure2002
- Clay Stabilization in Low-Permeability FormationsSPE Production Engineering, 1991
- Clay Stabilization in Low-Permeability Formations1989
- New Polymer Offers Effective, Permanent Clay Stabilization TreatmentJournal of Petroleum Technology, 1981