A new method for identification of cyclic plasticity model parameters
Open Access
- 14 February 2022
- journal article
- research article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 22 (2) , 1-14
Abstract
In this study, a new method for determining the material parameters of cyclic plasticity is presented. The method can be applied to evaluate the model parameters from any loading histories measured experimentally. The experimental data require basic processing only to be utilized. The method can be applied to calibrate the parameters of different elastoplastic models such as the Chaboche–Rousselier (Ch–R) constitutive equation or other model formulations which use different rules of isotropic hardening. The developed method was utilized to evaluate the material parameters of copper for a selected group of constitutive models. It is shown that among the considered model formulations a very good description of the mechanical properties of copper is achieved for the Ch–R model with two Voce terms used for simulating the isotropic hardening and two backstress variables utilized for capturing the kinematic hardening behavior. Furthermore, it is demonstrated that a model calibrated using the cyclic tension/compression data is able to properly capture the material response in torsion. Similarly, when the constitutive parameters are determined using the cyclic torsion data the model is able to properly reproduce the material behavior in tension/compression. It is concluded that for the considered type of constitutive equations the material parameters can be identified from a single mechanical test. The proposed methodology was validated using the relations derived analyticallyKeywords
Funding Information
- Narodowe Centrum Nauki (2019/35/B/ST8/03151)
This publication has 14 references indexed in Scilit:
- Identification of Chaboche–Lemaitre combined isotropic–kinematic hardening model parameters assisted by the fuzzy logic analysisActa Mechanica, 2020
- The application of Chaboche model in uniaxial ratcheting simulationsAdvances in Manufacturing Science and Technology, 2020
- Fuzzy logic enhancement of material hardening parameters obtained from tension–compression testContinuum Mechanics and Thermodynamics, 2019
- Characterization of the cyclic-plastic behaviour of flexible structures by applying the Chaboche modelArchives of Civil and Mechanical Engineering, 2017
- Material Behavior Simulation of 42CrMo4 Steel2016
- Parameter determination of Chaboche kinematic hardening model using a multi objective Genetic AlgorithmComputational Materials Science, 2011
- Inverse approach to identification of material parameters of cyclic elasto-plasticity for component layers of a bimetallic sheetInternational Journal of Plasticity, 2003
- Constitutive equations for cyclic plasticity and cyclic viscoplasticityInternational Journal of Plasticity, 1989
- On the Plastic and Viscoplastic Constitutive Equations—Part II: Application of Internal Variable Concepts to the 316 Stainless SteelJournal of Pressure Vessel Technology, 1983
- On the Plastic and Viscoplastic Constitutive Equations—Part I: Rules Developed With Internal Variable ConceptJournal of Pressure Vessel Technology, 1983