Analysis of organic multilayers and 3D structures using Ar cluster ions
Authors:
- 9 July 2012
- journal article
- conference paper
- Published by Wiley in Surface and Interface Analysis
- Vol. 45 (1) , 158-162
Abstract
Ar cluster sputtering of organic multilayers such as organic light‐emitting diode model structures and Irganox delta layers is studied with time‐of‐flight secondary ion mass spectroscopy in the dual beam mode. Results for sputtering yield volumes and depth resolution are presented for Ar clusters with sizes from 500 to 5000 atoms in the energy range from 2.5 to 20 keV. The sputtering yield volume shows a linear dependence on the energy per atom for all materials in this study with a material‐dependent threshold below 1 eV/atom. The sputtering yield volume at a given energy per atom increases with the cluster size. At constant beam energies, the sputtering yield volume decreases slightly with increasing cluster size. The depth resolution is investigated for the two model systems as a function of energy and cluster size, and it will be shown that the depth resolution depends mainly on the sample roughening. The depth resolution is approximately proportional to the depth of the impact crater at a given cluster size and energy. The optimum depth resolution achieved is in the range of 4–5 nm and is fairly constant with depth. At very low energies per atom close to the threshold energy, ripple formation is observed that leads to a fast degradation of the depth resolution with depth. This can be completely eliminated by fast sample rotation. Finally, the perspective of 3D analysis of organic devices with high depth resolution in the dual beam mode will be discussed. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 17 references indexed in Scilit:
- Molecular depth profiling of trehalose using a C60 cluster ion beamApplied Surface Science, 2008
- Depth profiling of organic materials using improved ion beam conditionsApplied Surface Science, 2008
- Molecular depth‐profiling of polycarbonate with low‐energy Cs + ionsRapid Communications in Mass Spectrometry, 2007
- Molecular Depth Profiling of Multilayer Polymer Films Using Time-of-Flight Secondary Ion Mass SpectrometryAnalytical Chemistry, 2004
- C60 molecular depth profiling of a model polymerApplied Surface Science, 2004
- Depth Profiling of 4-Acetamindophenol-Doped Poly(lactic acid) Films Using Cluster Secondary Ion Mass SpectrometryAnalytical Chemistry, 2004
- Development of a C60+ ion gun for static SIMS and chemical imagingApplied Surface Science, 2003
- Secondary ion mass spectrometry with gas cluster ion beamsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2002
- Materials processing by gas cluster ion beamsMaterials Science and Engineering: R: Reports, 2001
- Preliminary evaluation of an SF5+ polyatomic primary ion beam for analysis of organic thin films by secondary ion mass spectrometryRapid Communications in Mass Spectrometry, 1998