Wire texture C-axis distribution of strontium ferrite/PA-12 extruded filament
Open Access
- 1 February 2024
- journal article
- research article
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Abstract
The magnetic anisotropy of strontium ferrite (SF)/PA12 filament, a popular hard magnetic ferrimagnetic composites that is used for 3D-printing of permanent magnets, is studied by vibrating sample magnetometry. The studied filaments have a composition of SF/PA-12 thermoplastic composite with a 40% wt. ratio of SF. SF particles are non-spherical platelets with an average diameter of 1.3 um and a diameter to thickness ratio of 3. Filaments are produced by a twin-screw extruder and have a diameter of 1.5 mm. SEM images show that the SF particles are homogeneously distributed through the filament. VSM measurements on different parts of the filaments show that the outer part of the cylindrical filament has a higher anisotropy, and the core is mostly isotropic. This conclusion is consistent with computational work by others which suggest that particle alignment predominantly takes place near the walls of the extruder die where shear flow is maximum. Additional hysteresis curve measurement of the outer cylindrical part of the filament parallel to the r and ϕ directions indicates that the squareness of the hysteresis curve (S) is larger in the r-direction. This indicates that the outer surface of the filament has a strong easy axis in the r-direction. We conclude that the SF platelets line up parallel to the walls of the extrusion die.Keywords
Funding Information
- NSF Through DMR-MRI (2216440)
This publication has 10 references indexed in Scilit:
- On the origin of systematic errors in VSM torque curvesAIP Advances, 2024
- In-situ alignment of 3D printed anisotropic hard magnetsScientific Reports, 2022
- Altering magnetic properties of iron filament PLA using magnetic field assisted additive manufacturing (MFAAM)Journal of Magnetism and Magnetic Materials, 2021
- In-situ magnetic alignment model for additive manufacturing of anisotropic bonded magnetsAdditive Manufacturing, 2021
- Finite element modelling of fully-coupled flow/fiber-orientation effects in polymer composite deposition additive manufacturing nozzle-extrudate flowComposites Part B: Engineering, 2021
- Time dependence of magnetic moment of strontium-ferrite powder measured with a biaxial vibrating sample magnetometer (VSM)AIP Advances, 2021
- Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabricationJournal of Applied Physics, 2020
- Fused filament fabrication of fiber-reinforced polymers: A reviewAdditive Manufacturing, 2018
- Anisotropic particles align perpendicular to the flow direction in narrow microchannelsProceedings of the National Academy of Sciences, 2013
- Particle simulation for predicting fiber motion in injection molding of short-fiber-reinforced compositesComposites Part A: Applied Science and Manufacturing, 2012