Design of a reconfigurable planar parallel manipulator
- 22 November 2004
- journal article
- research article
- Published by Wiley in Journal of Robotic Systems
- Vol. 21 (12) , 665-675
Abstract
This work presents the design of a reconfigurable planar parallel manipulator (RPPM). The RPPM is designed to act as a testbed manipulator for theories on redundant actuation of parallel manipulators and can reconfigure into three different revolute‐jointed mechanism types: a 2‐branch 2‐DOF (degree‐of‐freedom) 5‐bar mechanism; a 2‐branch 3‐DOF 6‐bar mechanism; and a 3‐branch 3‐DOF 8‐bar mechanism. The design of the RPPM allows for any shoulder or elbow joint to be actuated. In this work, the criteria and constraints of the design are presented. The final design of the RPPM is shown, followed by a discussion of the final design and how it relates to the initial design criteria and constraints.Keywords
This publication has 10 references indexed in Scilit:
- Design of the IRIS facility-a modular, reconfigurable and expandable robot test bed2002
- TETROBOT modular robotics: prototype and experiments2002
- A modular manipulator systems (MMS) architecture and implementation2002
- Advantages and dynamics of parallel manipulators with redundant actuation2002
- Kinematic Design of Modular Reconfigurable In-Parallel RobotsAutonomous Robots, 2001
- Reconfigurable main-arm for assembly of all revolute-only kinematically simple branchesJournal of Robotic Systems, 2000
- Design of a reconfigurable platform manipulatorJournal of Robotic Systems, 1998
- Determination of the workspace of planar parallel manipulators with joint limitsRobotics and Autonomous Systems, 1996
- A Class of Parallel Manipulators Based on Kinematically Simple BranchesJournal of Mechanical Design, 1994
- The Optimum Kinematic Design of a Planar Three-Degree-of-Freedom Parallel ManipulatorJournal of Mechanical Design, 1988