Application of a mechanistic model as a tool for on‐line monitoring of pilot scale filamentous fungal fermentation processes—The importance of evaporation effects
- 26 September 2016
- journal article
- research article
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 114 (3) , 589-599
Abstract
A mechanistic model‐based soft sensor is developed and validated for 550L filamentous fungus fermentations operated at Novozymes A/S. The soft sensor is comprised of a parameter estimation block based on a stoichiometric balance, coupled to a dynamic process model. The on‐line parameter estimation block models the changing rates of formation of product, biomass, and water, and the rate of consumption of feed using standard, available on‐line measurements. This parameter estimation block, is coupled to a mechanistic process model, which solves the current states of biomass, product, substrate, dissolved oxygen and mass, as well as other process parameters including kLa, viscosity and partial pressure of CO2. State estimation at this scale requires a robust mass model including evaporation, which is a factor not often considered at smaller scales of operation. The model is developed using a historical data set of 11 batches from the fermentation pilot plant (550L) at Novozymes A/S. The model is then implemented on‐line in 550L fermentation processes operated at Novozymes A/S in order to validate the state estimator model on 14 new batches utilizing a new strain. The product concentration in the validation batches was predicted with an average root mean sum of squared error (RMSSE) of 16.6%. In addition, calculation of the Janus coefficient for the validation batches shows a suitably calibrated model. The robustness of the model prediction is assessed with respect to the accuracy of the input data. Parameter estimation uncertainty is also carried out. The application of this on‐line state estimator allows for on‐line monitoring of pilot scale batches, including real‐time estimates of multiple parameters which are not able to be monitored on‐line. With successful application of a soft sensor at this scale, this allows for improved process monitoring, as well as opening up further possibilities for on‐line control algorithms, utilizing these on‐line model outputs. Biotechnol. Bioeng. 2017;114: 589–599.Keywords
Funding Information
- Novozymes A/S
- Technical University of Denmark (DTU)
This publication has 33 references indexed in Scilit:
- Real time in-line monitoring of large scale Bacillus fermentations with near-infrared spectroscopyJournal of Biotechnology, 2014
- Modeling enzyme production with Aspergillus oryzae in pilot scale vessels with different agitation, aeration, and agitator typesBiotechnology and Bioengineering, 2011
- Bioprocess control: Advances and challengesComputers & Chemical Engineering, 2006
- Automatization of a penicillin production process with soft sensors and an adaptive controller based on neuro fuzzy systemsControl Engineering Practice, 2004
- Soft sensors for on-line biomass measurementsBioprocess and Biosystems Engineering, 2004
- Directed evolution of industrial enzymes: an updateCurrent Opinion in Biotechnology, 2003
- Soft sensors development for on-line bioreactor state estimationComputers & Chemical Engineering, 2000
- The Computation of Equivalent Potential TemperatureMonthly Weather Review, 1980
- Bootstrap Methods: Another Look at the JackknifeThe Annals of Statistics, 1979
- An investigation of the laws of plastic flowBulletin of the Bureau of Standards, 1916