LMLisa Mears

Lisa Mears

*This is an algorithmically generated author record based on publicly available information.

Lisa Mears has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • An Industrial Perspective on Scale-Down Challenges Using Miniaturized Bioreactors

    by Tannaz Tajsoleiman, Lisa Mears, Ulrich Krühne, Krist V. Gernaey, Sjef Cornelissen


  • Mechanistic Fermentation Models for Process Design, Monitoring, and Control

    by Lisa Mears, Stuart M. Stocks, Mads O. Albaek, Gürkan Sin, Krist V. Gernaey


  • A novel model‐based control strategy for aerobic filamentous fungal fed‐batch fermentation processes

    by Lisa Mears, Stuart M. Stocks, Mads O. Albaek, Benny Cassells, Gürkan Sin, Krist V. Gernaey

    A novel model‐based control strategy has been developed for filamentous fungal fed‐batch fermentation processes. The system of interest is a pilot scale (550 L) filamentous fungus process operating at Novozymes A/S. In such processes, it is desirable to maximize the total product achieved in a batch in a defined process time. In order to achieve this goal, it is important to maximize both the product concentration, and also the total final mass in the fed‐batch system. To this end, we describe the development of a control strategy which aims to achieve maximum tank fill, while avoiding oxygen limited conditions. This requires a two stage approach: (i) calculation of the tank start fill; and (ii) on‐line control in order to maximize fill subject to oxygen transfer limitations. First, a mechanistic model was applied off‐line in order to determine the appropriate start fill for processes with four different sets of process operating conditions for the stirrer speed, headspace pressure, and aeration rate. The start fills were tested with eight pilot scale experiments using a reference process operation. An on‐line control strategy was then developed, utilizing the mechanistic model which is recursively updated using on‐line measurements. The model was applied in order to predict the current system states, including the biomass concentration, and to simulate the expected future trajectory of the system until a specified end time. In this way, the desired feed rate is updated along the progress of the batch taking into account the oxygen mass transfer conditions and the expected future trajectory of the mass. The final results show that the target fill was achieved to within 5% under the maximum fill when tested using eight pilot scale batches, and over filling was avoided. The results were reproducible, unlike the reference experiments which show over 10% variation in the final tank fill, and this also includes over filling. The variance of the final tank fill is reduced by over 74%, meaning that it is possible to target the final maximum fill reproducibly. The product concentration achieved at a given set of process conditions was unaffected by the control strategy. Biotechnol. Bioeng. 2017;114: 1459–1468.


  • Top Cited Papers

    A review of control strategies for manipulating the feed rate in fed-batch fermentation processes

    by Lisa Mears, Stuart M. Stocks, Gürkan Sin, Krist V. Gernaey


  • Application of a mechanistic model as a tool for on‐line monitoring of pilot scale filamentous fungal fermentation processes—The importance of evaporation effects

    by Lisa Mears, Stuart M. Stocks, Mads O. Albaek, Gürkan Sin, Krist V. Gernaey

    A mechanistic model‐based soft sensor is developed and validated for 550L filamentous fungus fermentations operated at Novozymes A/S. The soft sensor is comprised of a parameter estimation block based on a stoichiometric balance, coupled to a dynamic process model. The on‐line parameter estimation block models the changing rates of formation of product, biomass, and water, and the rate of consumption of feed using standard, available on‐line measurements. This parameter estimation block, is coupled to a mechanistic process model, which solves the current states of biomass, product, substrate, dissolved oxygen and mass, as well as other process parameters including kLa, viscosity and partial pressure of CO2. State estimation at this scale requires a robust mass model including evaporation, which is a factor not often considered at smaller scales of operation. The model is developed using a historical data set of 11 batches from the fermentation pilot plant (550L) at Novozymes A/S. The model is then implemented on‐line in 550L fermentation processes operated at Novozymes A/S in order to validate the state estimator model on 14 new batches utilizing a new strain. The product concentration in the validation batches was predicted with an average root mean sum of squared error (RMSSE) of 16.6%. In addition, calculation of the Janus coefficient for the validation batches shows a suitably calibrated model. The robustness of the model prediction is assessed with respect to the accuracy of the input data. Parameter estimation uncertainty is also carried out. The application of this on‐line state estimator allows for on‐line monitoring of pilot scale batches, including real‐time estimates of multiple parameters which are not able to be monitored on‐line. With successful application of a soft sensor at this scale, this allows for improved process monitoring, as well as opening up further possibilities for on‐line control algorithms, utilizing these on‐line model outputs. Biotechnol. Bioeng. 2017;114: 589–599.


  • Functional unfold principal component regression methodology for analysis of industrial batch process data

    by Lisa Mears, Rasmus Nørregård, Gürkan Sin, Krist V. Gernaey, Stuart M. Stocks, Mads O. Albaek, Kris Villez

    This work proposes a methodology utilizing functional unfold principal component regression (FUPCR), for application to industrial batch process data as a process modeling and optimization tool. The methodology is applied to an industrial fermentation dataset, containing 30 batches of a production process operating at Novozymes A/S. Following the FUPCR methodology, the final product concentration could be predicted with an average prediction error of 7.4%. Multiple iterations of preprocessing were applied by implementing the methodology to identify the best data handling methods for the model. It is shown that application of functional data analysis and the choice of variance scaling method have the greatest impact on the prediction accuracy. Considering the vast amount of batch process data continuously generated in industry, this methodology can potentially contribute as a tool to identify desirable process operating conditions from complex industrial datasets. © 2016 American Institute of Chemical Engineers AIChE J, 62: 1986–1994, 2016


  • Mechanistic Models for Process Development and Optimization of Fed-batch Fermentation Systems

    by Lisa Mears, Stuart M. Stocks, Mads O. Albæk, Gürkan Sin, Krist Gernaey


  • Multivariate Analysis of Industrial Scale Fermentation Data

    by Lisa Mears, Rasmus Nørregård, Stuart M. Stocks, Mads O. Albaek, Gürkan Sin, Krist V. Gernaey, Kris Villez


  • Challenges in industrial fermentation technology research

    by Luca Riccardo Formenti, Anders Nørregaard, Andrijana Bolic, Daniela Quintanilla Hernandez, Timo Hagemann, Anna‐Lena Heins, Hilde Larsson, Lisa Mears, Miguel Mauricio‐Iglesias, Ulrich Krühne, et al.

    Industrial fermentation processes are increasingly popular, and are considered an important technological asset for reducing our dependence on chemicals and products produced from fossil fuels. However, despite their increasing popularity, fermentation processes have not yet reached the same maturity as traditional chemical processes, particularly when it comes to using engineering tools such as mathematical models and optimization techniques. This perspective starts with a brief overview of these engineering tools. However, the main focus is on a description of some of the most important engineering challenges: scaling up and scaling down fermentation processes, the influence of morphology on broth rheology and mass transfer, and establishing novel sensors to measure and control insightful process parameters. The greatest emphasis is on the challenges posed by filamentous fungi, because of their wide applications as cell factories and therefore their relevance in a White Biotechnology context. Computational fluid dynamics (CFD) is introduced as a promising tool that can be used to support the scaling up and scaling down of bioreactors, and for studying mixing and the potential occurrence of gradients in a tank.