Research on Noninteger Pole Number for Segmental Permanent Magnet Linear Synchronous Motor
- 7 April 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (5) , 4120-4130
Abstract
A segmental permanent magnet linear synchronous motor (S-PMLSM) with non-integer pole number, which has low detent force and high thrust, is presented in this paper. For the S-PMLSM, the non-integer pole structure makes up for the defect that the conventional integer pole structure cannot suppress the third and its times harmonics in the detent force, thereby can further reduces the thrust ripple rate of the motor. Special winding arrangement is adopted for non-integer pole structure, of which the winding factor is relatively high. Another advantage of the non-integer pole structure is the decoupling between the detent force and the cogging force. When designing cogging parameters and structures, it is not limited by the requirement of the detent force, which enlarges the range of cogging parameters and finally helps to improve the motor thrust. In this paper, 18-slot 24-pole and 18-slot 19.2-pole S-PMLSMs, representing integer and non-integer pole structures, respectively, are selected as samples for comparative analysis. The results show that the later removes almost all detent force while giving higher thrust than the former. The simulation and experimental results validate the research theory.Keywords
Funding Information
- National Natural Science Foundation of China (51537002)
- National Natural Science of China Youth Fund (51707046)
- National Natural Science Foundation of China (51690182)
This publication has 23 references indexed in Scilit:
- Double-Sided Iron-Core PMLSM Mover Teeth Arrangement Design for Reduction of Detent Force and Speed RippleIEEE Transactions on Industrial Electronics, 2015
- Detent-Force Minimization of Double-Sided Interior Permanent-Magnet Flat Linear Brushless MotorIEEE Transactions on Magnetics, 2015
- Detent Force Compensation for PMLSM Systems Based on Structural Design and Control Method CombinationIEEE Transactions on Industrial Electronics, 2015
- Investigation of Auxiliary Poles Optimal Design on Reduction of End Effect Detent Force for PMLSM With Typical Slot–Pole CombinationsIEEE Transactions on Magnetics, 2015
- Analysis of a permanent magnet linear synchronous motor with segmented armature for transportation system2014
- Influence of Leading Design Parameters on the Force Performance of a Complementary and Modular Linear Flux-Switching Permanent-Magnet MotorIEEE Transactions on Industrial Electronics, 2013
- A New Method for Reduction of Detent Force in Permanent Magnet Flux-Switching Linear MotorsIEEE Transactions on Magnetics, 2009
- An approach to a suitable stator length for minimizing the detent force of permanent magnet linear synchronous motorsIEEE Transactions on Magnetics, 2000
- Reduction of cogging force in slotlesslinear permanent magnet motorsIEE Proceedings - Electric Power Applications, 1997
- Calculation of cogging force in a novel slotted linear tubular brushless permanent magnet motorIEEE Transactions on Magnetics, 1997