A novel 6-dimensional force measurement based on the electric 6-DOF loading device
- 4 January 2024
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (4) , 045002
Abstract
The 6-degrees-of-freedom (6-DOF) platform has gained popularity in industry owing to its advantages, especially in indoor simulation experiment requiring six-dimensional force environments. However, up to date, the measurement of such six-dimensional forces is challenging due to complex structures, difficult decoupling, and high costs. In this study, an electric 6-DOF loading device designed by ourselves is presented, with an ability to load high precision displacement and force. To measure the six-dimensional force of the device’s moving platform, this paper proposes a scheme involving embedding tension-compression sensors in each leg of the device and describes the mechanical model of the device. Then a novel method with a variable transformation matrix is proposed, complemented by a decoupling study that optimizes the variable transformation matrix. Finally, we validate the proposed method through an external force loading experiment. The results indicate that the error in Fy experiment is less than 2.7%, and the error in Fz experiment is less than 1.6%. The novel method exhibits high accuracy, easy installation, fast response, and low cost.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (DUT21GF307)
- National Natural Science Foundation of China (51975082)
This publication has 17 references indexed in Scilit:
- Dynamic analysis of a six-degree of freedom wave energy converter based on the concept of the Stewart-Gough platformRenewable Energy, 2020
- Fault-tolerant measurement mechanism research on pre-tightened four-point supported piezoelectric six-dimensional force/torque sensorMechanical Systems and Signal Processing, 2020
- A Novel Geometric Design Method of Elastic Structure for 6-Axis Force/Torque SensorIEEE Access, 2019
- Structure design of six-component strain-gauge-based transducer for minimum cross-interference via hybrid optimization methodsStructural and Multidisciplinary Optimization, 2019
- Dynamic modeling and decoupled control of a flexible Stewart platform for vibration isolationJournal of Sound and Vibration, 2019
- FEA-Based Design Studies for Development of Diaphragm Force TransducersMAPAN, 2018
- Dial-in Topological Metamaterials Based on Bistable Stewart PlatformScientific Reports, 2018
- Development and evaluation of a compact 6-axis force/moment sensor with a serial structure for the humanoid robot footMeasurement, 2015
- Dynamic modeling of the Stewart platform for the NanShan Radio TelescopeAdvances in Mechanical Engineering, 2014
- A comparison of two innovative technologies for safe pipe installation — “Pipeman” and the Stewart–Gough platform-based pipe manipulatorAutomation in Construction, 2008