Enhancement of Toughness and Barrier Properties in Polybutylene Adipate Terephthalate/Polylactic Acid Composite Films by Modified Halloysite Nanotubes
- 14 October 2025
- journal article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 32 (2) , 269-280
Abstract
Polybutylene adipate terephthalate (PBAT) has good flexibility and tear resistance, but when used as a film, it has problems such as low tensile strength and poor gas barrier properties. Blending polylactic acid (PLA) with PBAT can effectively compensate for the mechanical performance defects of PBAT. However, blending PBAT and PLA has compatibility issues, and the tensile strength and gas barrier properties of PBAT/PLA (TA) films are still relatively low. Halloysite nanotubes (HNT) are hollow tubular inorganic nanomaterials with high specific strength and stiffness. Incorporating them into polymers can enhance the mechanical properties and gas barrier properties of polymer films. However, HNT tends to agglomerate, necessitating surface modification to improve its poor dispersibility in polymer matrices. In this study, to improve the mechanical properties and water vapor barrier properties of PBAT, PBAT and PLA were blended to prepare a TA blend, and HNT modified with 3‐aminopropyl triethoxysilane (KH550) (HNT‐NH 2 ) was introduced. A reactive compatibilizer ADR4468 was used to enhance the compatibility between the components. TA/ADR/HNT‐NH 2 nano‐composite films were prepared. The tensile strength (TS), elongation at break (EB), and water vapor permeability coefficient of the film were optimized to 41.28 MPa, 764%, and 15.6 × 10 −14 g·cm/(cm 2 ·s·Pa), respectively.Keywords
This publication has 39 references indexed in Scilit:
- Investigation of Reactive Compatibilization on Degradable Poly(lactic acid)/Poly(butylene adipate‐co‐terephthalate) Blends with Lysine DiisocyanateMacromolecular Chemistry and Physics, 2025
- CDs/PBAT Nanofiber Films With High Tensile Strength and Flame‐Retardant Property via Microfluidic TechnologyJournal of Polymer Science, 2024
- Poly (Butylene Adipate‐Co‐Terephthalate) (PBAT) – Based Biocomposites: A Comprehensive ReviewMacromolecular Materials and Engineering, 2024
- Enhancing biodegradation of PBAT through bio-stimulation using Pseudozyma jejuensis for effective plastic waste reductionChemosphere, 2023
- The relation between nanotube diameter, length and surface area and pore volume of multi-walled spiral halloysite nanotubes: A theoretical studyApplied Clay Science, 2021
- Effect of chain extrender on the compatibility, mechanical and gas barrier properties of poly(butylene adipate‐co‐terephthalate)/poly(propylene carbonate) bio‐compositesJournal of Applied Polymer Science, 2021
- Characterization of selectively etched halloysite nanotubes by acid treatmentApplied Surface Science, 2017
- Recent Progress on the Confinement, Assembly, and Relaxation of Inorganic Functional Fillers in Polymer Matrix during ProcessingMacromolecular Rapid Communications, 2017
- PLA composites: From production to propertiesAdvanced Drug Delivery Reviews, 2016
- Biodegradable polymers—an overviewPolymers for Advanced Technologies, 2014