Flow felid and heat transfer enhancement investigations by using a combination of corrugated tubes with a twisted tape within 3D circular tube based on different dimple configurations
- 17 June 2021
- journal article
- research article
- Published by Wiley in Heat Transfer
- Vol. 50 (7) , 6868-6885
Abstract
Different dimple geometrical configurations with a combination of corrugated tubes and twisted tape are numerically investigated. Water is used as a working fluid for constant heat flux heat transfer conditions at the pipe wall. The dimensionless diameter of the dimples (d/D) used in this study is 0.09, 0.18, 0.27, and 0.36. However, the corrugation configuration diameter is 1 mm. The numerical simulations are carried out at the Reynolds number in the range of 1500–14,000. The outcomes reveal that the friction factor (f) and Nu number are augmented as the dimple diameter increases. The Nu number ratio of 1.25 is found for a dimple pipe tube with a diameter of 4 mm. The numerical outcome presented more mixing, secondary, and vortex produced in the main flow direction and near the pipe wall to the rotating flow induced by twisted tape. Moreover, mixed, secondary vortices and rotational flow originate behind and near the dimple, twisted tape, and corrugation surfaces. These rotational and vortices can promote mixing in flow between the thermal boundary layer and velocity boundary flow layer. So, increase the heat transfer enhancement. The improved pipes with different dimple diameters produce a maximum performance evaluation factor of is more than 1.25.Keywords
This publication has 24 references indexed in Scilit:
- Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tubeInternational Journal of Heat and Mass Transfer, 2015
- Numerical studies on heat transfer and friction factor characteristics of a tube fitted with helical screw-tape without core-rod insertsInternational Journal of Heat and Mass Transfer, 2013
- Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapesInternational Journal of Thermal Sciences, 2012
- Heat transfer enhancement in a tube using delta-winglet twisted tape insertsApplied Thermal Engineering, 2010
- Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape insertsInternational Journal of Heat and Mass Transfer, 2010
- Thermal characteristics of turbulent rib-grooved channel flowsInternational Communications in Heat and Mass Transfer, 2009
- Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape insertsChemical Engineering and Processing - Process Intensification, 2009
- Heat transfer and pressure drop in tube with broken twisted tape insertExperimental Thermal and Fluid Science, 2007
- Heat transfer enhancement using Al2O3–water nanofluid for an electronic liquid cooling systemApplied Thermal Engineering, 2007
- Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elementsInternational Journal of Heat and Mass Transfer, 2001