Extraction of AMCC Signal Superposed by SOA-Integrated EA-DFB Laser for In-Service Monitoring in All-Photonics Network
- 30 June 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (17) , 5783-5792
Abstract
We propose an in-line monitoring method that enables fully passive extraction of the control signal for end-to-end optical direct connection on the All-Photonics Network (APN), which is one of the elements of the Innovative Optical and Wireless Network (IOWN). In our approach, the auxiliary management and control channel (AMCC) signal superposed on the client signal as the control signal is extracted by a fully passive configuration without any optical to electrical conversion. By installing the proposed configuration in the Photonic Gateway (Ph-GW), which is an edge optical node of the APN located at the boundary between the access network and the local full-mesh network, the AMCC signal can be extracted in the middle of a route even when the users are communicating via direct optical connection. The proposed configuration enables in-service user terminal monitoring for end-to-end optical direct connection, which is the core concept of the APN. We conducted transmission experiments on the area management of cyber physical system (CPS) in which we assumed that an intensity modulation-direct detection (IM-DD) system with low power consumption and economy is used. We then determined the target transmission distance and bandwidth and conducted 60-km optical transmission in the local full-mesh network. The results demonstrated that a loss budget of 36 dB for the client signal was achieved. We also investigated extending the transmission distance of the client signal by adjusting the branch ratio of the passive extractor so that the optical power of the AMCC signal reached the minimum receiver sensitivity. As a result, we were able to extend the transmission distance to 80 km.Keywords
Funding Information
- U.S. Department of Commerce (BS123456)
This publication has 18 references indexed in Scilit:
- An IoT Protocol Evaluation in a Smart Factory Environment2018
- Enabling Communication Technologies for Automated Unmanned Vehicles in Industry 4.02018
- ANALYSIS OF IT STANDARDS AND PROTOCOLS FOR INDUSTRY 4.0DEStech Transactions on Engineering and Technology Research, 2018
- An SOA-integrated EADFB laser for enhancement of modulated light output power and extension of transmission distances2018
- Experimental Demonstration for over Mbps Baseband-over-Modulation AMCC Implementation in PtP WDM-PON2018
- Development of Evaluation Platform of AMCC Superimposition on CPRI Signal Transmission for Mobile Fronthaul Network2017
- Cascaded Phase Modulation for AMCC Superimposition Toward MFH Employing CPRIIEEE Photonics Journal, 2017
- Application layer protocols for the Internet of Things: A survey2016
- Novel approach for chirp and output power compensation applied to a 40-Gbit/s EADFB laser integrated with a short SOAOptics Express, 2015
- High Output Power and Burst Extinction Ratio λ-Tunable ONU Transmitter Using Burst-Mode Booster SOA for WDM/TDM-PONJournal of Optical Communications and Networking, 2014