Mechanical and durability aspects of concrete incorporating secondary aluminium slag
Authors:
- M. Satish ReddyMRM. Satish Reddy
- D. NeerajaDND. Neeraja
Open Access
- 1 December 2016
- journal article
- Published by National Research Tomsk Polytechnic University in Resource-Efficient Technologies
- Vol. 2 (4) , 225-232
Abstract
The environmental impact can be minimised by making use of many industrial wastes in a sustainable manner. Recycling and reutilisation of industrial waste and by-products is of paramount importance in cement and concrete industry. In view of rapid infrastructure growth, there is an emerging need for development of cementitious materials or fillers either to replace cement or fine aggregate for stable growth. One of the industrial wastes is secondary aluminium dross. In this paper, an attempt has been made to study the mechanical and durability aspects of concrete incorporated with secondary aluminium dross. Cement has been partially replaced by secondary aluminium dross in different proportions to study the mechanical and durability aspects. Various properties such as compressive strength, split tensile strength, flexural strength, sorptivity, water absorption, rapid chloride penetration have been studied for the usefulness of secondary aluminium dross as construction material. It is observed that up to 15% replacement of cement by secondary aluminium dross, the responses are comparable with the conventional concrete. Studies have also been carried out by adding other supplementary cementitious materials such as fly ash and silica fume in various proportions along with secondary aluminium dross and found the improved mechanical and durability properties. From the overall study, it can be concluded that the concrete incorporated with secondary aluminium dross can be used for making paver blocks, refractory bricks and for normal concrete strength applicationsKeywords
This publication has 8 references indexed in Scilit:
- Investigation of concrete produced using recycled aluminium dross for hot weather concreting conditionsResource-Efficient Technologies, 2016
- Physical and Mechanical Properties of Aluminum DrossAdvances in Materials, 2014
- Evaluation of the Mechanical Properties of Polypropylene-Aluminum-Dross CompositeISRN Polymer Science, 2012
- Prediction of the Compressive Strength of Aluminum Waste–Cement Concrete Using Scheffe’s TheoryJournal of Materials in Civil Engineering, 2012
- The Use of Aluminum Waste for Concrete ProductionJournal of Asian Architecture and Building Engineering, 2011
- Utilization of aluminum sludge and aluminum slag (dross) for the manufacture of calcium aluminate cementCeramics International, 2009
- Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituentsWaste Management, 2005
- Mechanical behaviour of Portland cement mortars with incorporation of Al-containing salt slagsCement and Concrete Research, 2000