Channel profile optimization and device design for low-power high-performance dynamic-threshold MOSFET

Authors:

Abstract
The trend of power supply voltage Vdd scaling is taking a faster pace than threshold voltage Vt scaling, resulting in reduction in gate overdrive and speed [1] (Fig. 1). More aggressive Vt scaling can only be used for appli-cations that are tolerant to large standby power. Multi-ple-Vt technology is a good candidate for circuits with standby/active features[2] but can not function as a sin-gle device switch, which is one of the major application of MOSFET. One possible solution is to use MOSFET with dynamic Vt; it provides low Vt when the device is turned-on for high current drive, and high Vt when the device is turned-off for low subthreshold leakage. Examples of such device operations are the direct gate coupling in SOI MOSFET[3] and gate-body tie (DTMOS)[4] using SOI substrate (Fig. 2) or bulk sub-strate (Fig. 3). In this work device design of DTMOS and its parasitic components based on the structure in Fig. 2 are studied by experiments and simulations. In Fig. 2 the gate and the body are tied at the side of the device. Similar gate-body tie can also be accomplished in bulk substrate using multiple-well technology. For circuit whose speed is predominately determined by wiring capacitances, DTMOS can greatly enhance per-formance by engineering the vertical doping profiles to scale the depletion width xdep. When the circuit speed is dominated by device capacitances, lateral doping engi-neering is important to reduce Cbs and Cbd in order to obtain performance improvements, especially in cer-tain logic circuits where Miller effect is important.