A New Grid-Connected Constant Frequency Three-Phase Induction Generator System under Unbalanced-Voltage Conditions
Open Access
- 14 April 2021
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 10 (8) , 938
Abstract
This paper presents a new constant frequency, direct grid-connected wind-based induction generator system (IGS). The proposed system includes a six-phase cage rotor with two separate three-phase balanced stator windings and a three-phase SV-PWM inverter which is used as a STATCOM. The first stator winding is connected to the STATCOM and is used to excite the machine. The main frequency of the STATCOM is considered to be constant and equal to the main grid frequency. In the second stator winding, the frequency of the induced emf is equal to the constant frequency, so the generator output frequency is independent of the load power demand and its prime mover speed. The second stator winding is directly connected to the main grid without an intermediate back-to-back converter. In order to regulate the IGS output active and reactive power components, a sliding mode control (SMC) is designed. Assuming unbalanced three-phase voltages for the main grid, a second SMC is developed to remove the machine output’s negative sequence currents. Moreover, a conventional PI controller is used to force the average exchanging active power between the machine and STATCOM to zero. This PI controller generates the reference value of the rotor angular speed. An adjustable speed pitch angle-controlled wind turbine is used as the IGS’s prime mover. The effectiveness and capability of the proposed control scheme have been supported by the simulation results.Keywords
This publication has 33 references indexed in Scilit:
- Capacitor Bank Sizing for Squirrel Cage Induction Generators Operating in Distributed SystemsIEEE Access, 2020
- Modeling and experimental analysis of grid-connected six-phase induction generator for variable speed wind energy conversion systemElectric Power Systems Research, 2019
- Design and Performance Comparisons of Brushless Doubly Fed Generators With Different Rotor StructuresIEEE Transactions on Industrial Electronics, 2018
- Approach to dynamic voltage stability analysis for DFIG wind parks integrationIET Renewable Power Generation, 2017
- A novel current control strategy for a back-to-back HVDC applications under unbalanced operation conditions2017
- Dynamic power flow algorithm considering frequency regulation of wind power generatorsIET Renewable Power Generation, 2017
- Control Strategy of a DVR to Improve Stability in Wind Farms Using Squirrel-Cage Induction GeneratorsIEEE Transactions on Power Systems, 2010
- Optimization of Wind Turbine Performance With Data-Driven ModelsIEEE Transactions on Sustainable Energy, 2010
- Independent voltage and frequency controller for a parallel operated isolated three‐phase asynchronous generatorsEuropean Transactions on Electrical Power, 2008
- Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A SurveyIEEE Transactions on Industrial Electronics, 2006