Jafar Soltani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jafar Soltani has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Gholamreza Arab Markadeh
Department of Engineering, Shahrekord University, Shahrekord, Iran
3 shared publications - Amir Farokh Payam
Ulster University
2 shared publications - M.A. Abbasian
Isfahan University of Technology,Isfahan,Iran
2 shared publications - Mohammadreza Moradian
Department of Electrical Engineering Najafabad Branch Islamic Azad University Najafabad Iran
2 shared publications - Abbas Najjar-Khodabakhsh
Department of Electrical Engineering, Najafabad Branch, Islamic Azad University, Najafabad 85141-43131, Iran
1 shared publication - Hossein Shahinzadeh
Smart Microgrid Research Center, Najafabad Branch, Islamic Azad University, Najafabad 85141-43131, Iran
1 shared publication
Latest Publications
- Open Access
A Parameter Independent Stator Current Space-Vector Reference Frame-Based Sensorless IPMSM Drive Using Sliding Mode Control
In this paper, a sliding mode control is presented for direct torque and stator flux control of interior permanent magnet synchronous motor in a rotor speed sensorless drive system. The control scheme is developed in a specific synchronous rotating reference frame (X-Y) in which the stator current space vector coincides with the direct (X) axis. For this control technique no need to have any knowledge of machine parameters such as stator two-axis inductances, rotor permanent magnets flux linkage, and even the rotor initial position. However, the on-line actual stator resistance value is required to estimate the stator flux components in the stator stationary two-axis reference frame. In this control strategy, two simple methods are described for estimating the rotor speed and stator resistance. Some simulation and experimental results are presented to support the validity and effectiveness of the proposed control scheme.
Open AccessA Parameter Independent Stator Current Space-Vector Reference Frame-Based Sensorless IPMSM Drive Using Sliding Mode Control
In this paper, a sliding mode control is presented for direct torque and stator flux control of interior permanent magnet synchronous motor in a rotor speed sensorless drive system. The control scheme is developed in a specific synchronous rotating reference frame (X-Y) in which the stator current space vector coincides with the direct (X) axis. For this control technique no need to have any knowledge of machine parameters such as stator two-axis inductances, rotor permanent magnets flux linkage, and even the rotor initial position. However, the on-line actual stator resistance value is required to estimate the stator flux components in the stator stationary two-axis reference frame. In this control strategy, two simple methods are described for estimating the rotor speed and stator resistance. Some simulation and experimental results are presented to support the validity and effectiveness of the proposed control scheme.
- Open Access
- 14 April 2021
- Published by MDPI AG in Electronics
- Vol. 10 (8) , 938
A New Grid-Connected Constant Frequency Three-Phase Induction Generator System under Unbalanced-Voltage Conditions
This paper presents a new constant frequency, direct grid-connected wind-based induction generator system (IGS). The proposed system includes a six-phase cage rotor with two separate three-phase balanced stator windings and a three-phase SV-PWM inverter which is used as a STATCOM. The first stator winding is connected to the STATCOM and is used to excite the machine. The main frequency of the STATCOM is considered to be constant and equal to the main grid frequency. In the second stator winding, the frequency of the induced emf is equal to the constant frequency, so the generator output frequency is independent of the load power demand and its prime mover speed. The second stator winding is directly connected to the main grid without an intermediate back-to-back converter. In order to regulate the IGS output active and reactive power components, a sliding mode control (SMC) is designed. Assuming unbalanced three-phase voltages for the main grid, a second SMC is developed to remove the machine output’s negative sequence currents. Moreover, a conventional PI controller is used to force the average exchanging active power between the machine and STATCOM to zero. This PI controller generates the reference value of the rotor angular speed. An adjustable speed pitch angle-controlled wind turbine is used as the IGS’s prime mover. The effectiveness and capability of the proposed control scheme have been supported by the simulation results.
- 14 April 2021
- Published by MDPI AG in Electronics
- Vol. 10 (8) , 938
Open AccessA New Grid-Connected Constant Frequency Three-Phase Induction Generator System under Unbalanced-Voltage Conditions
This paper presents a new constant frequency, direct grid-connected wind-based induction generator system (IGS). The proposed system includes a six-phase cage rotor with two separate three-phase balanced stator windings and a three-phase SV-PWM inverter which is used as a STATCOM. The first stator winding is connected to the STATCOM and is used to excite the machine. The main frequency of the STATCOM is considered to be constant and equal to the main grid frequency. In the second stator winding, the frequency of the induced emf is equal to the constant frequency, so the generator output frequency is independent of the load power demand and its prime mover speed. The second stator winding is directly connected to the main grid without an intermediate back-to-back converter. In order to regulate the IGS output active and reactive power components, a sliding mode control (SMC) is designed. Assuming unbalanced three-phase voltages for the main grid, a second SMC is developed to remove the machine output’s negative sequence currents. Moreover, a conventional PI controller is used to force the average exchanging active power between the machine and STATCOM to zero. This PI controller generates the reference value of the rotor angular speed. An adjustable speed pitch angle-controlled wind turbine is used as the IGS’s prime mover. The effectiveness and capability of the proposed control scheme have been supported by the simulation results.
- 1 September 2017
- Published by Elsevier in ISA Transactions
- Vol. 70, 502-511
Torque ripple reduction of brushless DC motor based on adaptive input-output feedback linearization
- 1 September 2017
- Published by Elsevier in ISA Transactions
- Vol. 70, 502-511
Torque ripple reduction of brushless DC motor based on adaptive input-output feedback linearization
- 1 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2725-2730
A Speed Sensorless Sliding-Mode Controller for Doubly-Fed Induction Machine Drives with Adaptive Backstepping Observer
In this paper, a novel nonlinear speed sensorless control scheme is presented for doubly-fed induction machine drive (DFIM). The proposed controller Is designed on the basis of input-output feedback linearization and sliding-mode control with adaptive backstepping observer. Considering the DFIM fifth order model in a stator two axis reference frame with rotor fluxes (psi dr ,psi qr ) and stator currents (ids, iqs ) as state variables, an ideal tracking controller is first designed which is capable of following a desired reference model. It is shown that the ideal controller can perfectly track the active and reactive powers reference signal that are injected to the stator circuit. However in the motoring mode of operation, the tracking signals are the rotor speed reference signal and the reactive power reference signal that is injected to the stator circuit. Then in order to remove the rotor speed mechanical sensor and making the drive system performance robust with respect to the stator and rotor resistance variation, an adaptive backstepping observer is designed which online detects the mentioned quantities. The nonlinear observer stability is proved by Lyapanouv theory. Finally, the validity and effectiveness of the drive system control method is demonstrated by some simulation results.
- 1 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2725-2730
A Speed Sensorless Sliding-Mode Controller for Doubly-Fed Induction Machine Drives with Adaptive Backstepping Observer
In this paper, a novel nonlinear speed sensorless control scheme is presented for doubly-fed induction machine drive (DFIM). The proposed controller Is designed on the basis of input-output feedback linearization and sliding-mode control with adaptive backstepping observer. Considering the DFIM fifth order model in a stator two axis reference frame with rotor fluxes (psi dr ,psi qr ) and stator currents (ids, iqs ) as state variables, an ideal tracking controller is first designed which is capable of following a desired reference model. It is shown that the ideal controller can perfectly track the active and reactive powers reference signal that are injected to the stator circuit. However in the motoring mode of operation, the tracking signals are the rotor speed reference signal and the reactive power reference signal that is injected to the stator circuit. Then in order to remove the rotor speed mechanical sensor and making the drive system performance robust with respect to the stator and rotor resistance variation, an adaptive backstepping observer is designed which online detects the mentioned quantities. The nonlinear observer stability is proved by Lyapanouv theory. Finally, the validity and effectiveness of the drive system control method is demonstrated by some simulation results.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1-5
Robust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks
In this paper, using the three-phase induction motor (IM) fifth order model in a stationary two axis reference frame with stator current and rotor flux as state variables, a conventional backstepping controller is designed first for speed and rotor flux control of an IM drive. Then in order to make the control system stable and robust against the parameter uncertainties as well as the unknown load torque, in the next stage the backstepping controller is combined with an artificial neural network (ANN). It will be shown that the proposed composite controller is capable of compensating the parameters variations and rejecting the external load torque disturbance. The overall system stability is proved by Lyapunov theory. It is also shown that the method of ANN training, guarantees the boundedness of errors and ANN weighs. The validity and effectiveness of the controller is verified by computer simulation
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1-5
Robust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks
In this paper, using the three-phase induction motor (IM) fifth order model in a stationary two axis reference frame with stator current and rotor flux as state variables, a conventional backstepping controller is designed first for speed and rotor flux control of an IM drive. Then in order to make the control system stable and robust against the parameter uncertainties as well as the unknown load torque, in the next stage the backstepping controller is combined with an artificial neural network (ANN). It will be shown that the proposed composite controller is capable of compensating the parameters variations and rejecting the external load torque disturbance. The overall system stability is proved by Lyapunov theory. It is also shown that the method of ANN training, guarantees the boundedness of errors and ANN weighs. The validity and effectiveness of the controller is verified by computer simulation
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, 1-6
A Robust Adaptive Sliding-Mode Controller for Slip Power Recovery Induction Machine Drives
In this paper a robust nonlinear controller is presented for doubly-fed induction machine (DFIM) drives. The nonlinear controller is designed based on combination of Sliding-Mode (SM) and Adaptive-Backstepping control techniques. Using the fifth order model of DFIM in a stator d, q axis reference frames with stator currents and rotor fluxes as state variables, a SM controller is designed in order to follow a linear reference model. Then, the SM control and adaptive backstepping control approach are combined to design a robust composite nonlinear controller for DFIM that makes the drive system robust and stable against the parameters uncertainties and external load torque disturbance. In this drive system two back-to-back voltage source two level SVM-PWM inverters are employed in the rotor circuit, to make the drive system capable of operating in motoring and generating modes below and above synchronous speed. Computer simulation results obtained, confirm the effectiveness and validity of the proposed control approach
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, 1-6
A Robust Adaptive Sliding-Mode Controller for Slip Power Recovery Induction Machine Drives
In this paper a robust nonlinear controller is presented for doubly-fed induction machine (DFIM) drives. The nonlinear controller is designed based on combination of Sliding-Mode (SM) and Adaptive-Backstepping control techniques. Using the fifth order model of DFIM in a stator d, q axis reference frames with stator currents and rotor fluxes as state variables, a SM controller is designed in order to follow a linear reference model. Then, the SM control and adaptive backstepping control approach are combined to design a robust composite nonlinear controller for DFIM that makes the drive system robust and stable against the parameters uncertainties and external load torque disturbance. In this drive system two back-to-back voltage source two level SVM-PWM inverters are employed in the rotor circuit, to make the drive system capable of operating in motoring and generating modes below and above synchronous speed. Computer simulation results obtained, confirm the effectiveness and validity of the proposed control approach
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1-6
Robust Nonlinear Control of Linear Induction Motor taking into account the Primary End Effects
This paper presents a robust nonlinear controller for speed and flux control of primary type linear induction motor (LIM) drive. The proposed controller is designed based on combination of input-output feedback linearization and sliding-mode (SM) control taking into account the LIM end effects. The stability of proposed composite controller is proved by Lyapunov theory. The effectiveness and validity of the nonlinear controller system is supported by computer simulation. Simulation results obtained, confirm that the drive system controller is robust an stable against the parameters variations and external unknown load force
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1-6
Robust Nonlinear Control of Linear Induction Motor taking into account the Primary End Effects
This paper presents a robust nonlinear controller for speed and flux control of primary type linear induction motor (LIM) drive. The proposed controller is designed based on combination of input-output feedback linearization and sliding-mode (SM) control taking into account the LIM end effects. The stability of proposed composite controller is proved by Lyapunov theory. The effectiveness and validity of the nonlinear controller system is supported by computer simulation. Simulation results obtained, confirm that the drive system controller is robust an stable against the parameters variations and external unknown load force
- 28 April 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 596-601
Adaptive backstepping based Controller design for Interior type PMSM using Maximum Torque Per Ampere Strategy
In this paper, a nonlinear adaptive backstepping controller is discussed for interior type permanent magnet synchronous motor (IPMSM) drive which is designed on the basis of maximum torque per ampere (MTPA) control strategy related to this motor. Using a general non-overparameterized adaptive backstepping procedure, it is proved that the system control variables are asymptotically stable. In addition, it is also shown that the estimation errors in the motor two axis inductances and rotor permanent magnet flux linkages, asymptotically converge to zero if the system persistency of excitation condition is also satisfied (PE). The PE condition is satisfied if the low amplitude low frequency AC signals are superimposed to the d-axes reference current (id*). Simulation results clearly show that the proposed adaptive control scheme can track the speed reference signal successfully, and that it can compensates all the electromechanical parameters variation so that no priori knowledge of real parameters is +required
- 28 April 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 596-601
Adaptive backstepping based Controller design for Interior type PMSM using Maximum Torque Per Ampere Strategy
In this paper, a nonlinear adaptive backstepping controller is discussed for interior type permanent magnet synchronous motor (IPMSM) drive which is designed on the basis of maximum torque per ampere (MTPA) control strategy related to this motor. Using a general non-overparameterized adaptive backstepping procedure, it is proved that the system control variables are asymptotically stable. In addition, it is also shown that the estimation errors in the motor two axis inductances and rotor permanent magnet flux linkages, asymptotically converge to zero if the system persistency of excitation condition is also satisfied (PE). The PE condition is satisfied if the low amplitude low frequency AC signals are superimposed to the d-axes reference current (id*). Simulation results clearly show that the proposed adaptive control scheme can track the speed reference signal successfully, and that it can compensates all the electromechanical parameters variation so that no priori knowledge of real parameters is +required
- 24 February 2006
- Published by Springer Nature in Electrical Engineering
- Vol. 88 (6) , 485-496
Robust direct torque and flux control of adjustable speed sensorless induction machine drive based on space vector modulation using a PI predictive controller
- 24 February 2006
- Published by Springer Nature in Electrical Engineering
- Vol. 88 (6) , 485-496
Robust direct torque and flux control of adjustable speed sensorless induction machine drive based on space vector modulation using a PI predictive controller
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 949-954
Robust Backstepping Control of Linear Induction Motor with Primary End Effect using Artificial Neural Networks
This paper presents a robust nonlinear controller for speed and flux control of a linear induction motor (LIM) drive with taking the primary end effect into account. An ideal nonlinear controller is first designed based on adaptive backstepping control approach for LIM low and high speed operation. Then the backstepping control and artificial neural networks (ANN ) are combined in order to design a robust nonlinear controller that is capable of preserving the drive system robustness subject to all parameter variations and uncertainties. The overall system stability is proved by Lyapunov theory. Finally, The effectiveness and validity of the proposed controller is supported by computer simulation results.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 949-954
Robust Backstepping Control of Linear Induction Motor with Primary End Effect using Artificial Neural Networks
This paper presents a robust nonlinear controller for speed and flux control of a linear induction motor (LIM) drive with taking the primary end effect into account. An ideal nonlinear controller is first designed based on adaptive backstepping control approach for LIM low and high speed operation. Then the backstepping control and artificial neural networks (ANN ) are combined in order to design a robust nonlinear controller that is capable of preserving the drive system robustness subject to all parameter variations and uncertainties. The overall system stability is proved by Lyapunov theory. Finally, The effectiveness and validity of the proposed controller is supported by computer simulation results.