Synthesis of lignin-derived polyols via deep eutectic solvent liquefaction
- 21 May 2026
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 11 (9) , 2068-2084
Abstract
Polyols, serving as core feedstocks in polyurethane production, are characterized by multiple hydroxyl groups (–OH), primarily encompassing polyether polyols (PPG) and polyester polyols (PEP). Their reaction with isocyanates yields polyurethane materials with unique properties. However, conventional petroleum-derived polyols face challenges in meeting green sustainability demands. Lignin, with its abundant phenolic and aliphatic hydroxyl groups, presents a renewable alternative to petrochemical polyols. Its global abundance provides a significant resource base. Deep eutectic solvents (DESs), offering mild reaction conditions, reusability, and high efficiency/selectivity, demonstrate significant potential for producing bio-based polyols. This study employed a modified DES (comprising lactic acid as a hydrogen bond donor and 3,4-dimethyl-1H-pyrazole as a hydrogen bond acceptor) to extract lignin from waste corn stalks, followed by solvothermal liquefaction using polyethylene glycol (MW = 400) and glycerol to synthesize lignin-derived polyether polyols. Comprehensive multiscale characterization elucidated the factors influencing composition, physicochemical properties, and production efficiency. Optimized extraction conditions yielded light-colored lignin with 80% yield, a weight-average molecular weight (Mw) of 35 647 g mol−1, and a polydispersity index (PDI) of 2.221, exhibiting excellent thermal stability below 200 °C. Optimal liquefaction conditions produced polyols with a hydroxyl value of 440.7 mg KOH per g, an acid value of 37.7 mg KOH per g, a viscosity of 646.7 mPa s, and an Mw of 7429 g mol−1. Structural confirmation was achieved via Gel Permeation Chromatography (GPC) and Fourier Transform Infrared Spectroscopy (FTIR). This work successfully established a high-performance lignin-based polyol system, offering a sustainable pathway for polyurethane feedstocks.Keywords
Funding Information
- National Natural Science Foundation of China (52302290)
- Shanghai Municipal Education Commission (23CGA72)
- Shanghai Education Development Foundation
This publication has 46 references indexed in Scilit:
- Effect of acid-alcohol deep eutectic solvents-regulated lignin structure on subsequent pyrolysis products distributionFuel, 2024
- Fractionated lignin as a polyol in polyurethane fabricationInternational Journal of Biological Macromolecules, 2023
- Anticorrosive epoxy coatings from direct epoxidation of bioethanol fractionated ligninInternational Journal of Biological Macromolecules, 2022
- Catalytic valorization of biomass for furfuryl alcohol by novel deep eutectic solvent-silica chemocatalyst and newly constructed reductase biocatalystBioresource Technology, 2022
- Preparation castor oil-modified high bio-based waterborne polyurethane and its applicationJournal of Polymer Research, 2021
- Application of heterogeneous catalysis to biodiesel synthesis using microalgae oilFrontiers of Environmental Science & Engineering, 2020
- Influence of Chemical Structure of Petrochemical Polyol on Properties of Bio-polyurethane FoamsJournal of Polymers and the Environment, 2019
- Integration of heat recovery unit in coal fired power plants to reduce energy cost of carbon dioxide captureApplied Energy, 2018
- Synthesis of polyurethanes from CO2-based polyols: A challenge for sustainable adhesivesInternational Journal of Adhesion and Adhesives, 2016
- Study of the mechanical, thermal properties and flame retardancy of rigid polyurethane foams prepared from modified castor-oil-based polyolsIndustrial Crops and Products, 2014