Runping Jia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Runping Jia has a total of 151 co-authors. Here are the top co-authors by number of shared publications:
- Xiaowei Xu
School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai, 201418, PR China
15 shared publications Lin Lin
13 shared publicationsShufang Chang
13 shared publicationsDandan Wu
11 shared publicationsJichao Shi
11 shared publicationsXiaowei Xu
9 shared publications
Latest Publications
- Open Access
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Rational Construction of FeP 4 -CHPO/CoFe-LDH/NF Heterostructures as Robust Bifunctional Electrocatalysts for Efficient Alkaline Overall Water Splitting
In this study, a strategy combining hydrothermal synthesis coupled with electrodeposition was harnessed to fabricate FeP4-CHPO/CoFe-LDH/NF heterostructured electrocatalysts on nickel foam. The experimental results confirm that the electrocatalysts deliver unrivaled HER and OER electrocatalytic efficacy in alkaline electrolytes: at 100 mA cm⁻², the overpotentials for HER and OER were merely 165 mV and 270 mV, respectively. When assembled into a symmetric electrolyzer, the catalyst affords a current density of 10 mA cm⁻² at an operating voltage of merely 1.50 V and manifests superior stability exceeding 48 h. Further material characterizations and electrochemical measurements demonstrate that the intimate heterojunction formed between FeP4-CHPO and CoFe-LDH effectively triggers interfacial electron redistribution, expedites charge transfer and modulates the adsorption free energy of critical reaction intermediates, thus profoundly amplifying the overall water electrolysis efficacy through synergistic interplay. This research affords groundbreaking perspectives and viable avenues for the judicious design of superior-performing non-noble metal heterostructured electrocatalysts.
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRational Construction of FeP 4 -CHPO/CoFe-LDH/NF Heterostructures as Robust Bifunctional Electrocatalysts for Efficient Alkaline Overall Water Splitting
In this study, a strategy combining hydrothermal synthesis coupled with electrodeposition was harnessed to fabricate FeP4-CHPO/CoFe-LDH/NF heterostructured electrocatalysts on nickel foam. The experimental results confirm that the electrocatalysts deliver unrivaled HER and OER electrocatalytic efficacy in alkaline electrolytes: at 100 mA cm⁻², the overpotentials for HER and OER were merely 165 mV and 270 mV, respectively. When assembled into a symmetric electrolyzer, the catalyst affords a current density of 10 mA cm⁻² at an operating voltage of merely 1.50 V and manifests superior stability exceeding 48 h. Further material characterizations and electrochemical measurements demonstrate that the intimate heterojunction formed between FeP4-CHPO and CoFe-LDH effectively triggers interfacial electron redistribution, expedites charge transfer and modulates the adsorption free energy of critical reaction intermediates, thus profoundly amplifying the overall water electrolysis efficacy through synergistic interplay. This research affords groundbreaking perspectives and viable avenues for the judicious design of superior-performing non-noble metal heterostructured electrocatalysts.
- 21 May 2026
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 11 (9) , 2068-2084
Synthesis of lignin-derived polyols via deep eutectic solvent liquefaction
Polyols, serving as core feedstocks in polyurethane production, are characterized by multiple hydroxyl groups (–OH), primarily encompassing polyether polyols (PPG) and polyester polyols (PEP). Their reaction with isocyanates yields polyurethane materials with unique properties. However, conventional petroleum-derived polyols face challenges in meeting green sustainability demands. Lignin, with its abundant phenolic and aliphatic hydroxyl groups, presents a renewable alternative to petrochemical polyols. Its global abundance provides a significant resource base. Deep eutectic solvents (DESs), offering mild reaction conditions, reusability, and high efficiency/selectivity, demonstrate significant potential for producing bio-based polyols. This study employed a modified DES (comprising lactic acid as a hydrogen bond donor and 3,4-dimethyl-1H-pyrazole as a hydrogen bond acceptor) to extract lignin from waste corn stalks, followed by solvothermal liquefaction using polyethylene glycol (MW = 400) and glycerol to synthesize lignin-derived polyether polyols. Comprehensive multiscale characterization elucidated the factors influencing composition, physicochemical properties, and production efficiency. Optimized extraction conditions yielded light-colored lignin with 80% yield, a weight-average molecular weight (Mw) of 35 647 g mol−1, and a polydispersity index (PDI) of 2.221, exhibiting excellent thermal stability below 200 °C. Optimal liquefaction conditions produced polyols with a hydroxyl value of 440.7 mg KOH per g, an acid value of 37.7 mg KOH per g, a viscosity of 646.7 mPa s, and an Mw of 7429 g mol−1. Structural confirmation was achieved via Gel Permeation Chromatography (GPC) and Fourier Transform Infrared Spectroscopy (FTIR). This work successfully established a high-performance lignin-based polyol system, offering a sustainable pathway for polyurethane feedstocks.
- 21 May 2026
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 11 (9) , 2068-2084
Synthesis of lignin-derived polyols via deep eutectic solvent liquefaction
Polyols, serving as core feedstocks in polyurethane production, are characterized by multiple hydroxyl groups (–OH), primarily encompassing polyether polyols (PPG) and polyester polyols (PEP). Their reaction with isocyanates yields polyurethane materials with unique properties. However, conventional petroleum-derived polyols face challenges in meeting green sustainability demands. Lignin, with its abundant phenolic and aliphatic hydroxyl groups, presents a renewable alternative to petrochemical polyols. Its global abundance provides a significant resource base. Deep eutectic solvents (DESs), offering mild reaction conditions, reusability, and high efficiency/selectivity, demonstrate significant potential for producing bio-based polyols. This study employed a modified DES (comprising lactic acid as a hydrogen bond donor and 3,4-dimethyl-1H-pyrazole as a hydrogen bond acceptor) to extract lignin from waste corn stalks, followed by solvothermal liquefaction using polyethylene glycol (MW = 400) and glycerol to synthesize lignin-derived polyether polyols. Comprehensive multiscale characterization elucidated the factors influencing composition, physicochemical properties, and production efficiency. Optimized extraction conditions yielded light-colored lignin with 80% yield, a weight-average molecular weight (Mw) of 35 647 g mol−1, and a polydispersity index (PDI) of 2.221, exhibiting excellent thermal stability below 200 °C. Optimal liquefaction conditions produced polyols with a hydroxyl value of 440.7 mg KOH per g, an acid value of 37.7 mg KOH per g, a viscosity of 646.7 mPa s, and an Mw of 7429 g mol−1. Structural confirmation was achieved via Gel Permeation Chromatography (GPC) and Fourier Transform Infrared Spectroscopy (FTIR). This work successfully established a high-performance lignin-based polyol system, offering a sustainable pathway for polyurethane feedstocks.
- Open Access
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Electronic Structure Engineering of Selenium-Doped MnVO for High-Performance Aqueous Zinc-Ion Batteries
Against the backdrop of an era characterised by the dual challenges of energy security and sustainable development, aqueous zinc ion batteries (AZIBs) are regarded as highly promising power sources. Nevertheless, their practical deployment is largely impeded by intrinsically low electronic conductivity and pronounced capacity decay upon repeated cycling. Traditional manganese-vanadium materials are prone to collapse and have low active site utilisation. This study employed a hydrothermal synthesis method to prepare MnV12O31·10H2O (MnVO) nanosheets, which were subsequently subjected to high-temperature selenium doping to yield selenium-doped vanadium manganese oxide (Se-MnVO). Such a cathode architecture provides a large specific surface area, shortened ion transport pathways, and improved structural robustness. The fabricated Se-MnVO electrode achieved a high reversible capacity of 400 mAh·g-1 at a current density of 0.1 A·g-1, demonstrating excellent rate performance of 282.37 mAh·g-1 at 1 A·g-1. After 1000 cycles at 1 A·g-1, its capacity retention remained at 89%. These findings indicate that selenium doping can effectively boost the electrochemical performance and cycling stability of manganese vanadate cathodes, providing important insights for the rational development of high-performance AZIB cathode materials.
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessElectronic Structure Engineering of Selenium-Doped MnVO for High-Performance Aqueous Zinc-Ion Batteries
Against the backdrop of an era characterised by the dual challenges of energy security and sustainable development, aqueous zinc ion batteries (AZIBs) are regarded as highly promising power sources. Nevertheless, their practical deployment is largely impeded by intrinsically low electronic conductivity and pronounced capacity decay upon repeated cycling. Traditional manganese-vanadium materials are prone to collapse and have low active site utilisation. This study employed a hydrothermal synthesis method to prepare MnV12O31·10H2O (MnVO) nanosheets, which were subsequently subjected to high-temperature selenium doping to yield selenium-doped vanadium manganese oxide (Se-MnVO). Such a cathode architecture provides a large specific surface area, shortened ion transport pathways, and improved structural robustness. The fabricated Se-MnVO electrode achieved a high reversible capacity of 400 mAh·g-1 at a current density of 0.1 A·g-1, demonstrating excellent rate performance of 282.37 mAh·g-1 at 1 A·g-1. After 1000 cycles at 1 A·g-1, its capacity retention remained at 89%. These findings indicate that selenium doping can effectively boost the electrochemical performance and cycling stability of manganese vanadate cathodes, providing important insights for the rational development of high-performance AZIB cathode materials.
- Open Access
- 22 March 2026
- Published by Elsevier in SSRN Electronic Journal
Electronic Structure Engineering of Selenium-Doped MnVO for High-Performance Aqueous Zinc-Ion Batteries
Against the backdrop of an era characterised by the dual challenges of energy security and sustainable development, aqueous zinc ion batteries (AZIBs) are regarded as highly promising power sources. Nevertheless, their practical deployment is largely impeded by intrinsically low electronic conductivity and pronounced capacity decay upon repeated cycling. Traditional manganese-vanadium materials are prone to collapse and have low active site utilisation. This study employed a hydrothermal synthesis method to prepare MnV12O31·10H2O (MnVO) nanosheets, which were subsequently subjected to high-temperature selenium doping to yield selenium-doped vanadium manganese oxide (Se-MnVO). Such a cathode architecture provides a large specific surface area, shortened ion transport pathways, and improved structural robustness. The fabricated Se-MnVO electrode achieved a high reversible capacity of 400 mAh·g-1 at a current density of 0.1 A·g-1, demonstrating excellent rate performance of 282.37 mAh·g-1 at 1 A·g-1. After 1000 cycles at 1 A·g-1, its capacity retention remained at 89%. These findings indicate that selenium doping can effectively boost the electrochemical performance and cycling stability of manganese vanadate cathodes, providing important insights for the rational development of high-performance AZIB cathode materials.
- 22 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessElectronic Structure Engineering of Selenium-Doped MnVO for High-Performance Aqueous Zinc-Ion Batteries
Against the backdrop of an era characterised by the dual challenges of energy security and sustainable development, aqueous zinc ion batteries (AZIBs) are regarded as highly promising power sources. Nevertheless, their practical deployment is largely impeded by intrinsically low electronic conductivity and pronounced capacity decay upon repeated cycling. Traditional manganese-vanadium materials are prone to collapse and have low active site utilisation. This study employed a hydrothermal synthesis method to prepare MnV12O31·10H2O (MnVO) nanosheets, which were subsequently subjected to high-temperature selenium doping to yield selenium-doped vanadium manganese oxide (Se-MnVO). Such a cathode architecture provides a large specific surface area, shortened ion transport pathways, and improved structural robustness. The fabricated Se-MnVO electrode achieved a high reversible capacity of 400 mAh·g-1 at a current density of 0.1 A·g-1, demonstrating excellent rate performance of 282.37 mAh·g-1 at 1 A·g-1. After 1000 cycles at 1 A·g-1, its capacity retention remained at 89%. These findings indicate that selenium doping can effectively boost the electrochemical performance and cycling stability of manganese vanadate cathodes, providing important insights for the rational development of high-performance AZIB cathode materials.
- 16 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (12) , 5435-5445
Polyimide Reinforced Silica Composite Aerogels with High Mechanical Properties and Low Thermal Conductivity for Thermal Insulation
- 16 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (12) , 5435-5445
Polyimide Reinforced Silica Composite Aerogels with High Mechanical Properties and Low Thermal Conductivity for Thermal Insulation
- Open Access
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
A PVA/Gelatin Composite Aerogel with Synergistic Radiative Cooling and Thermal Insulation for Energy-Efficient Building Applications
To address the vicious cycle caused by high energy consumption and greenhouse gas emissions of traditional temperature control equipment, this paper focuses on passive radiative cooling technology and develops a polyvinyl alcohol (PVA)/gelatin (GE) composite aerogel that combines radiative cooling and heat insulation functions. The composite aerogel is prepared by a freeze-drying process, in which a stable composite structure is formed through the hydrogen bond interaction between PVA and GE molecules. This structure retains the intrinsic advantages of single-component aerogel, such as low density and high porosity, while significantly improving mechanical properties and optimizing pore size distribution. The experimental results demonstrate that the PVA-GE composite aerogel exhibits an ultralow thermal conductivity of 0.03280W/(m·K). It also shows a high average solar reflectance of up to 91% over the entire solar spectrum, together with a mid-infrared (8-13μm) emissivity of 94%. As a result, the composite aerogel achieves sub-environmental cooling of up to 11.4°C during daytime conditions and effectively mitigates the issue of excessive cooling at night. The synergistic combination of radiation cooling and thermal insulation endows this composite aerogel with broad application potential in thermal management for intelligent energy-efficient buildings, providing an effective pathway toward the development of low-cost, scalable, and sustainable temperature regulaiton materials.
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA PVA/Gelatin Composite Aerogel with Synergistic Radiative Cooling and Thermal Insulation for Energy-Efficient Building Applications
To address the vicious cycle caused by high energy consumption and greenhouse gas emissions of traditional temperature control equipment, this paper focuses on passive radiative cooling technology and develops a polyvinyl alcohol (PVA)/gelatin (GE) composite aerogel that combines radiative cooling and heat insulation functions. The composite aerogel is prepared by a freeze-drying process, in which a stable composite structure is formed through the hydrogen bond interaction between PVA and GE molecules. This structure retains the intrinsic advantages of single-component aerogel, such as low density and high porosity, while significantly improving mechanical properties and optimizing pore size distribution. The experimental results demonstrate that the PVA-GE composite aerogel exhibits an ultralow thermal conductivity of 0.03280W/(m·K). It also shows a high average solar reflectance of up to 91% over the entire solar spectrum, together with a mid-infrared (8-13μm) emissivity of 94%. As a result, the composite aerogel achieves sub-environmental cooling of up to 11.4°C during daytime conditions and effectively mitigates the issue of excessive cooling at night. The synergistic combination of radiation cooling and thermal insulation endows this composite aerogel with broad application potential in thermal management for intelligent energy-efficient buildings, providing an effective pathway toward the development of low-cost, scalable, and sustainable temperature regulaiton materials.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
Non-semiconducting GO as an interfacial relay in an Ag-bridged Z-scheme Ag 2 MoO 4 /Ag 3 PO 4 composite for photocatalytic oxygen evolution
An in situ formed Ag-bridged Z-scheme (GO/Ag 2 MoO 4 /Ag 3 PO 4 ) photocatalyst is developed for efficient O 2 evolution. Metallic Ag mediators and GO electron-extractors synergistically maximize charge separation and suppress photocorrosion.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
Non-semiconducting GO as an interfacial relay in an Ag-bridged Z-scheme Ag 2 MoO 4 /Ag 3 PO 4 composite for photocatalytic oxygen evolution
An in situ formed Ag-bridged Z-scheme (GO/Ag 2 MoO 4 /Ag 3 PO 4 ) photocatalyst is developed for efficient O 2 evolution. Metallic Ag mediators and GO electron-extractors synergistically maximize charge separation and suppress photocorrosion.
- 21 May 2025
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 27 (23) , 3957-3970
Facile construction of magnetic α-Fe2O3/SiO2 composite aerogels for enhanced adsorption and visible light photocatalytic activity
The unique structure of the α-Fe2O3/SiO2 composite aerogels enhanced utilization of visible light and adsorption of organic pollutants, accelerated the electron transfer and prolonged the recombination of electron hole pairs.
- 21 May 2025
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 27 (23) , 3957-3970
Facile construction of magnetic α-Fe2O3/SiO2 composite aerogels for enhanced adsorption and visible light photocatalytic activity
The unique structure of the α-Fe2O3/SiO2 composite aerogels enhanced utilization of visible light and adsorption of organic pollutants, accelerated the electron transfer and prolonged the recombination of electron hole pairs.
- 4 January 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (9)
Solvent‐Free Approach for Performance Regulation in Transparent Waterborne Polyurethane Acrylate Dispersions Through Excessive Neutralization
The conventional use of the acetone method for waterborne polyurethane acrylate(WPUA) preparation encounters challenges in completely eliminating volatile organic compound emissions, presenting obstacles to meeting potentially stricter emission standards in the future. This work investigated the possibility of preparing WPUA using the acetone method without organic solvents. For the first time, it was found that excessive neutralizing agents can contribute to the performance regulation of WPUA dispersions by inhibiting the crystallization of polyurethane hard chain segments under the condition of a large number of urethane end chain segments. The conditions under which performance regulation can occur were verified through comparative experiments and density functional theory simulations. The research results demonstrate the successful preparation of a highly transparent WPUA dispersion with a particle size of 47.92 nm, a polydispersity of 0.032, a solid content of 44.12 wt%, and a rotational viscosity of 169.27 mPa·s. The membrane prepared by this dispersion exhibited a tensile strength of 30.51 MPa and a significantly low degree of swelling. This study emphasizes the scalability and universality of the proposed methods, highlighting their long‐term significance, potential for industrial production, and contribution to establishing a more environmentally friendly and sustainable future.
- 4 January 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (9)
Solvent‐Free Approach for Performance Regulation in Transparent Waterborne Polyurethane Acrylate Dispersions Through Excessive Neutralization
The conventional use of the acetone method for waterborne polyurethane acrylate(WPUA) preparation encounters challenges in completely eliminating volatile organic compound emissions, presenting obstacles to meeting potentially stricter emission standards in the future. This work investigated the possibility of preparing WPUA using the acetone method without organic solvents. For the first time, it was found that excessive neutralizing agents can contribute to the performance regulation of WPUA dispersions by inhibiting the crystallization of polyurethane hard chain segments under the condition of a large number of urethane end chain segments. The conditions under which performance regulation can occur were verified through comparative experiments and density functional theory simulations. The research results demonstrate the successful preparation of a highly transparent WPUA dispersion with a particle size of 47.92 nm, a polydispersity of 0.032, a solid content of 44.12 wt%, and a rotational viscosity of 169.27 mPa·s. The membrane prepared by this dispersion exhibited a tensile strength of 30.51 MPa and a significantly low degree of swelling. This study emphasizes the scalability and universality of the proposed methods, highlighting their long‐term significance, potential for industrial production, and contribution to establishing a more environmentally friendly and sustainable future.