Effects of segmented layer suction and micro-vortex generator on a high-load compressor cascade performance
- 20 January 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 235 (21) , 5309-5323
Abstract
The axial location of full-span boundary layer suction is studied to explore the influences of suction slot on the cascade performance. At the design condition, the slot with 50% axial location shows a superior capability to reduce the total pressure loss. At the near stall condition, the more upstream of the suction slot is moved, the more total pressure loss is reduced, and the suction slot with a location of 0.7 axial chord length cannot effectively reduces the total pressure loss in all conditions. Moreover, a rearranged segmented suction slot according to the distribution characteristics of the flow reversal region is developed and compared with full-span boundary layer suction. The segmented suction slot shows significant advantages in delaying the stall occurrence, and the stall point is delayed from 7.9° to 10.0° compared with the baseline. According to a quantitative analysis method selected to measure the performances of flow control technologies, the wake loss is significantly reduced by the segmented suction slot. Finally, a set of micro-vortex generator is introduced in the cascade with a segmented suction slot, and the conclusion indicates that the portion near the end-wall is very effective to reduce the flow loss.Keywords
Funding Information
- National Natural Science Foundation of China (51536006, 51576162)
- National Major Science and Technology Projects of China (2017-II-0005-0018)
This publication has 33 references indexed in Scilit:
- Effect of Segment Endwall Boundary Layer Suction on Compressor 3D Corner Separation2015
- About Transonic Compressor Tandem Design: A Principle Study2015
- Three-Dimensional Flow Field in Highly Loaded Compressor CascadeJournal of Turbomachinery, 2014
- Simulations of a Compressor Cascade with Steady Secondary Flow Suction2013
- Evaluation of Passive and Active Secondary Flow Control in a High Speed Compressor Cascade with Different Measurement Techniques2013
- Advanced Nonaxisymmetric Endwall Contouring for Axial Compressors by Generating an Aerodynamic Separator—Part I: Principal Cascade Design and Compressor ApplicationJournal of Turbomachinery, 2010
- Effects of Vortex Generator Application on the Performance of a Compressor Cascade2010
- Control of Three-Dimensional Separations in Axial Compressors by Tailored Boundary Layer SuctionJournal of Turbomachinery, 2007
- Axial Compressor Aerodesign Evolution at General ElectricJournal of Turbomachinery, 2002
- Predictions of Endwall Losses and Secondary Flows in Axial Flow Turbine CascadesJournal of Turbomachinery, 1987