Rapid Estimation of Sulfur Content in High-Ash Indian Coal Using Mid-Infrared FTIR Data
Open Access
Abstract
High-ash Indian coals are primarily used as thermal coal in power plants and industries. Due to the presence of sulfur in thermal coal, flue gas is a major environmental concern. Conventional methods (Ultimate Analysis of Coal) for sulfur content estimation are time-consuming, relatively costly, and destructive. In this study, Fourier-transform infrared (FTIR) spectroscopy has emerged as a promising alternative method for the rapid and nondestructive analysis of the sulfur content in coal. In the present study, the actual sulfur content in the coal samples was determined using Ultimate Analysis (CHNS analyzer). In contrast, mid-infrared FTIR spectroscopic data (4000–400 cm−1) were used to analyze the functional groups related to sulfur or its compounds in the coal samples to predict the sulfur content. A comparison of sulfur estimated using a CHNS analyzer and predicted using mid-infrared spectroscopy (FTIR) data shows that it can accurately predict sulfur content in high-ash Indian coals using the piecewise linear regression method (Quasi-Newton, QN). The proposed FTIR-based sulfur prediction model showed a coefficient of determination (R2) of up to 0.93, where the total no. of samples (Coal + KBr pellets, n) was 126 (using 17:1 split, K-fold cross validation). The root-mean-square error (RMSE, wt.%) is 0.0035, mean bias error (MBE, wt.%) is −0.0003, MBE (%) is 3.31% and mean absolute error (MAE, wt.%) is 0.0020. The two-tailed t-test and F-test for mean and variance indicated no significant difference between the pair of values of observed sulfur (SCHNS, wt.%) using CHNS data and the model predicted sulfur (SFTIR, wt.%) using FTIR data. The prediction model using mid-infrared FTIR spectroscopy data and the Quasi-Newton method with a breakpoint and loss function performs well for coal samples from the Johilla Coalfield, Umaria. Thus, it can be a valuable tool for analyzing sulfur in other ash-rich coals from various basins worldwide.Keywords
Funding Information
- DST (SR/FST/ESII-014/2012(C))
This publication has 45 references indexed in Scilit:
- The Health Effects of Coal Electricity Generation in IndiaSSRN Electronic Journal, 2012
- Measurement of CO2, CO, SO2, and NO emissions from coal-based thermal power plants in IndiaAtmospheric Environment, 2008
- Use of vegetation index and meteorological parameters for the prediction of crop yield in IndiaInternational Journal of Remote Sensing, 2007
- Characterisation of an Egyptian coal by Mossbauer and FT-IR spectroscopy⋆Fuel, 2003
- SO2 scrubbing technologies: A reviewEnvironmental Progress, 2001
- Examination of sulfur forms in coal by direct pyrolysis and chemiluminescence detectionFuel, 1995
- Direct identification of organic sulphur species in Rasa coal from sulphur L-edge X-ray absorption near-edge spectraFuel, 1992
- Direct determination and quantification of sulfur forms in coals from the Argonne Premium Sample ProgramEnergy & Fuels, 1991
- Analysis of the Argonne premium coal samples by thermogravimetric Fourier transform infrared spectroscopyEnergy & Fuels, 1990
- Fourier Transform Infrared study of mineral matter in coal. A novel method for quantitative mineralogical analysisFuel, 1978