Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anubhav Shukla has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Gross Calorific Value Estimation in Coal Using Multi-Model FTIR and Machine Learning Approach

    by Arya Vinod, Anup Krishna Prasad, Sameeksha Mishra, Bitan Purkait, Shailayee Mukherjee, Anubhav Shukla, Bhabesh Chandra Sarkar, Atul Kumar Varma

    The Gross Calorific Value (GCV) is a key indicator used to assess the energy potential and quality of coal. Conventional oxygen bomb calorimetry, though widely used, is inherently time-consuming due to the combustion process involved. Similarly, regression models for GCV prediction based on ultimate or proximate analyses require extensive laboratory procedures and sample preparation. To address these challenges, this study investigates the use of mid-infrared Fourier Transform Infrared (FTIR) spectroscopy coupled with supervised variable selection to enable rapid, non-destructive, and cost-effective assessment of coal properties. In this work, a detailed mid-infrared FTIR spectral analysis of coal was conducted to identify fifty-six selective absorption bands (supervised input variables) sensitive to the organic functional group content in coal, coupled with several machine learning (ML) techniques to model the GCV of coal samples from the Johilla coal basin, India. The ML techniques employed here are piecewise linear regression (PLR), partial least squares regression (PLSR), support vector regression (SVR), random forest regression (RFR), artificial neural networks (ANN), and extreme gradient boosting regression (XGB). A multi-model estimation of GCV using the simple average output of the three models (PLSR, RFR, and XGB) achieved the best predictive performance (R2 = 0.951, RMSE = 19.050%, MBE = 1.420%, MAE = 4.053 cal/g), reflecting strong consistency between predictions and actual measurements. The FTIR-based approach achieves competitive or improved results relative to conventional methods and models documented in prior studies. The GCVs derived through modeling of FTIR data are also statistically proven (using t-test and F-test at alpha = 0.01) to be significantly similar to those of the bomb calorimeter, an industry standard for GCV measurements. Consequently, this novel FTIR-based methodology establishes an efficient, dependable tool for GCV determination that operates independently of conventional techniques, thereby enabling rapid quality assessment critical for industrial applications.


  • Open Access

    A novel multi-model estimation of phosphorus in coal and its ash using FTIR spectroscopy

    by Arya Vinod, Anup Krishna Prasad, Sameeksha Mishra, Bitan Purkait, Shailayee Mukherjee, Anubhav Shukla, Nirasindhu Desinayak, Bhabesh Chandra Sarkar, Atul Kumar Varma

    The level of phosphorus must be carefully monitored for proper and effective utilization of coal and coal ash. The phosphorus content needs to be assessed to optimize combustion efficiency and maintenance costs of power plants, ensure quality, and minimize the environmental impact of coal and coal ash. The detection of low levels of phosphorus in coal and coal ash is a significant challenge due to its complex chemical composition and low concentration levels. Effective monitoring requires accurate and sensitive equipment for the detection of phosphorus in coal and coal ash. X-ray fluorescence (XRF) is a commonly used analytical technique for the determination of phosphorus content in coal and coal ash samples but proves challenging due to their comparatively weak fluorescence intensity. Fourier Transform Infrared spectroscopy (FTIR) emerges as a promising alternative that is simple, rapid, and cost-effective. However, research in this area has been limited. Until now, only a limited number of research studies have outlined the estimation of major elements in coal, predominantly relying on FTIR spectroscopy. In this article, we explore the potential of FTIR spectroscopy combined with machine learning models (piecewise linear regression—PLR, partial least square regression—PLSR, random forest—RF, and support vector regression—SVR) for quantifying the phosphorus content in coal and coal ash. For model development, the methodology employs the mid-infrared absorption peak intensity levels of phosphorus-specific functional groups and anionic groups of phosphate minerals at various working concentration ranges of coal and coal ash. This paper proposes a multi-model estimation (using PLR, PLSR, and RF) approach based on FTIR spectral data to detect and rapidly estimate low levels of phosphorus in coal and its ash (R $$^2$$ 2 of 0.836, RMSE of 0.735 ppm, RMSE (%) of 34.801, MBE of − 0.077 ppm, MBE (%) of 5.499, and MAE of 0.528 ppm in coal samples and R $$^2$$ 2 of 0.803, RMSE of 0.676 ppm, RMSE (%) of 38.050, MBE of − 0.118 ppm, MBE (%) of 4.501, and MAE of 0.474 ppm in coal ash samples). Our findings suggest that FTIR combined with the multi-model approach combining PLR, PLSR, and RF regression models is a reliable tool for rapid and near-real-time measurement of phosphorus in coal and coal ash and can be suitably modified to model phosphorus content in other natural samples such as soil, shale, etc.


  • Open Access

    Rise in Mid-Tropospheric Temperature Trend (MSU/AMSU 1978–2022) over the Tibet and Eastern Himalayas

    by Nirasindhu Desinayak, Anup Krishna Prasad, Arya Vinod, Sameeksha Mishra, Anubhav Shukla, Suren Nayak

    The high-altitude Hindu Kush-Himalayan region (HKH, average ~5 km from msl) and the adjacent Indo-Gangetic plains (IG plains, ~0–250 m msl), due to their geographical location and complex topography, are reported to be highly sensitive to climatic changes. Recent studies show that the impacts of climate change and associated changes in water resources (glacial/snow melt water and rainfall) in this region are multifaceted, thereby affecting ecosystems, agriculture, industries, and inhabitants. In this study, 45 years of Microwave Sounding Unit/Advanced Microwave Sounding Unit (MSU/AMSU)-derived mid-tropospheric temperature (TMT, 3–7 km altitude) and lower tropospheric temperature (TLT, 0–3 km altitude) data from the Remote Sensing Systems (RSS Version 4.0) were utilized to analyze the overall changes in tropospheric temperature in terms of annual/monthly trends and anomalies. The current study shows that the mid-tropospheric temperature (0–3 km altitude over the HKH region) has already alarmingly increased (statistically significant) in Tibet, the western Himalayas, and the eastern Himalayas by 1.49 °K, 1.30 °K, and 1.35 °K, respectively, over the last 45 years (1978–2022). As compared to a previous report (TMT trend for 30 years, 1979–2008), the present study of TMT trends for 45 years (1978–2022) exhibits a rise in percent change in the trend component in the high-altitude regions of Tibet, the western Himalayas, and the eastern Himalayas by approximately 310%, 80%, and 170%, respectively. In contrast, the same for adjacent plains (the western and eastern IG plains) shows a negligible or much lower percent change (0% and 40%, respectively) over the last 14 years. Similarly, dust source regions in Africa, Arabia, the Middle East, Iran, and Pakistan show only a 130% change in warming trends over the past 14 years. In the monthly breakup, the ‘November to March’ period usually shows a higher TMT trend (with peaks in December, February, and March) compared to the rest of the months, except in the western Himalayas, where the peak is observed in May, which can be attributed to the peak dust storm activity (March to May). Snow cover over the HKH region, where the growing season is known to be from September to February, is also reported to show the highest snow cover in February (with the peak in January, February, or March), which coincides with the warmest period in terms of anomaly and trend observed in the long-term mid-tropospheric temperature data (1978–2022). Thus, the current study highlights that the statistically significant and positive TMT warming trend (95% CI) and its observed acceleration over the high-altitude region (since 2008) can be attributed to being one of the major factors causing an acceleration in the rate of melting of snow cover and glaciers, particularly in Tibet and the Eastern Himalayas.


  • Open Access

    Estimation of Carbon Content in High-Ash Coal Using Mid-Infrared Fourier-Transform Infrared Spectroscopy

    by Sameeksha Mishra, Anup Krishna Prasad, Anubhav Shukla, Arya Vinod, Kumari Preety, Atul Kumar Varma

    The carbon content of different types of coal determines its utility in industries and thermal power generation. The most popular and widely used is the conventional method (ultimate analysis) to determine coal’s carbon content (C, wt.%), along with H, N, and S. In the present study, the authors attempted to analyze the carbon content (C in %) in coals via data from Fourier-transform infrared (FTIR) spectroscopy, which can be a promising alternative. As a reference, the carbon content in the coal samples, referred to as CCHNS (in wt.%), was determined from the ultimate analysis. The mid-infrared FTIR spectroscopic data were used to investigate the response of functional groups associated with carbon or its compounds, which were used to model and estimate the carbon content in coal samples (referred to as CFTIR, in wt.%). FTIR spectral signatures were utilized in specific zones (between wavenumbers 4000 and 400 cm−1) from a total of 18 coal samples from the Johilla coalfield, Umaria district, Madhya Pradesh, India. These 18 coal samples were used to produce 126 Coal+KBr pellets (at seven known dilution factors for each coal sample), and the spectral response (absorbance) from each pellet was recorded. For model development and validation, the training set and test set were formed using a 17:1 split (K-fold cross validation). The carbon content in the coal samples was modeled using the training set data by applying the piecewise linear regression method employing quasi-Newton (QN) with a breakpoint and least squares loss function. The model was validated using an independent test set. A pairwise comparison of estimates of carbon in the laboratory from the CHNS analyzer (CCHNS) and modeled carbon from FTIR data (CFTIR) exhibited a good correlation, relatively low error, and bias (coefficient of determination (R2) up to 0.93, RMSE of 23.71%, and MBE of −0.52%). Further, the significance tests for the mean and variance using the two-tailed t-test and F-test showed that no significant difference occurred between the pair of observed CCHNS and the model’s estimated CFTIR. For high-ash coals from the Johilla coalfield, the model presented here using mid-infrared FTIR spectroscopy data performs well. Thus, FTIR can potentially serve as an important method for quickly determining the carbon content of high-ash coals from various basins and can potentially be extended to soil and shale samples.


  • Open Access

    Rapid Estimation of Sulfur Content in High-Ash Indian Coal Using Mid-Infrared FTIR Data

    by Anubhav Shukla, Anup K. Prasad, Sameeksha Mishra, Arya Vinod, Atul K. Varma

    High-ash Indian coals are primarily used as thermal coal in power plants and industries. Due to the presence of sulfur in thermal coal, flue gas is a major environmental concern. Conventional methods (Ultimate Analysis of Coal) for sulfur content estimation are time-consuming, relatively costly, and destructive. In this study, Fourier-transform infrared (FTIR) spectroscopy has emerged as a promising alternative method for the rapid and nondestructive analysis of the sulfur content in coal. In the present study, the actual sulfur content in the coal samples was determined using Ultimate Analysis (CHNS analyzer). In contrast, mid-infrared FTIR spectroscopic data (4000–400 cm−1) were used to analyze the functional groups related to sulfur or its compounds in the coal samples to predict the sulfur content. A comparison of sulfur estimated using a CHNS analyzer and predicted using mid-infrared spectroscopy (FTIR) data shows that it can accurately predict sulfur content in high-ash Indian coals using the piecewise linear regression method (Quasi-Newton, QN). The proposed FTIR-based sulfur prediction model showed a coefficient of determination (R2) of up to 0.93, where the total no. of samples (Coal + KBr pellets, n) was 126 (using 17:1 split, K-fold cross validation). The root-mean-square error (RMSE, wt.%) is 0.0035, mean bias error (MBE, wt.%) is −0.0003, MBE (%) is 3.31% and mean absolute error (MAE, wt.%) is 0.0020. The two-tailed t-test and F-test for mean and variance indicated no significant difference between the pair of values of observed sulfur (SCHNS, wt.%) using CHNS data and the model predicted sulfur (SFTIR, wt.%) using FTIR data. The prediction model using mid-infrared FTIR spectroscopy data and the Quasi-Newton method with a breakpoint and loss function performs well for coal samples from the Johilla Coalfield, Umaria. Thus, it can be a valuable tool for analyzing sulfur in other ash-rich coals from various basins worldwide.