Control of Low-Frequency Switch-Node Current Using PCB-Embedded Rogowski Coils With Reduced Sampling in GaN-Based PFC Converter
- 23 March 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 14312-14322
Abstract
Multiple currents are sensed within a power converter, requiring sensors with different bandwidths. Low-bandwidth sensors are typically used for average current control, while high-bandwidth sensors are employed for device current sensing and protection. Faster schemes of fault protection are required for GaN HEMTs. An effective solution for measuring high slew-rate switching transients in GaN HEMTs is the PCB coil-based current sensor, which offers high bandwidth and easy integrability. However, this sensor cannot be directly used to measure switch-node currents, which may be DC or line-frequency AC. This article proposes an online, analog-based reconstruction scheme for measurement of the switch-node grid current, with device current information from PCB-embedded Rogowski Coil (PCB-RC) sensors. The analog realisation facilitates current reconstruction with low latency and reduced sampling requirement. The reconstructed grid current is used for control of a GaN-based 3.3 kW Bidirectional Totem-pole PFC converter. Additionally, an overcurrent protection scheme is implemented using the reconstructed grid current, triggering safe shutdown of the converter during overload. Further, with the developed PCB-RCs, short-circuit protection of GaN HEMTs is achieved for a DC bus fault at 400 V. Therefore, PCB-RCs are demonstrated as a viable alternative to CTs and Hall-effect sensors, serving dual purposes of current control and protection.Keywords
Funding Information
- Ministry of Education, India
This publication has 27 references indexed in Scilit:
- Design Guidelines for Shield-Less PCB-Based Rogowski Coil Sensors With Passive Offset Compensation for Switching Current Measurement2023
- Ultra-Wideband Unidirectional Reset-Less Rogowski Coil Switch Current Sensor Topology for High-Frequency DC-DC Power Converters2023
- Enhanced Gate Driver Design for SiC-Based Generator Rectifier Unit for Airborne Applications2021
- GaN Transistors for Efficient Power Conversion2019
- Phase Current Reconstruction based on Rogowski Coils Integrated on Gate Driver of SiC MOSFET Half-Bridge Module for Continuous and Discontinuous PWM Inverter Applications2019
- Screen-Returned PCB Rogowski Coil for the Switch Current Measurement of SiC Devices2019
- Phase Current Sensor and Short-Circuit Detection based on Rogowski Coils Integrated on Gate Driver for 1.2 kV SiC MOSFET Half-Bridge Module2018
- A bridgeless totem-pole interleaved PFC converter for plug-in electric vehicles2016
- Fundamentals of Power Electronics1997
- An alternative low-cost current-sensing scheme for high-current power electronics circuitsIEEE Transactions on Industrial Electronics, 1995