Study on the Motion Characteristics of Solid Particles in Fine Flow Channels by Ultrasonic Cavitation
Open Access
- 28 July 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (8) , 1196
Abstract
Microjets caused by the cavitation effect in microchannels can affect the motion trajectory of solid particles in microchannels under ultrasonic conditions. The optimal parameters for an observation experiment were obtained through simulations, and an experiment was designed to verify these parameters. When the cavitation bubbles collapse in the near-wall area, the solid particles in the microchannel can be displaced along the expected motion trajectory. Using fluent software to simulate the bubble collapse process, it can be seen that, when an ultrasonic sound pressure acts on a bubble near the wall, the pressure causes the top of the bubble wall to sink inward and eventually penetrate the bottom of the bubble wall, forming a high-speed microjet. The maximum speed of the jet can reach nearly 28 m/s, and the liquid near the top of the bubble also moves at a high speed, driving the particles in the liquid towards the wall. A high-speed camera was used to observe the ultrasonic cavitation process of bubbles in the water to verify the simulation results. A comparison of particle motion with and without ultrasonic waves proved the feasibility of using the ultrasonic cavitation effect to guide small particles towards the wall. This method provides a novel experimental basis for changing the fluid layer state in the microchannel and improving precision machining.Keywords
Funding Information
- National Key Research and Development Program of China (2018YFC0809200, 51905515, LGF19G030004)
- National Natural Science Foundation of China (2018YFC0809200, 51905515, LGF19G030004)
- Public Welfare Technology Project of Zhejiang Province (2018YFC0809200, 51905515, LGF19G030004)
This publication has 25 references indexed in Scilit:
- Numerical investigation of the process and flow erosion of flushing oil tank with nitrogenPowder Technology, 2015
- Analysis of ball mill grinding operation using mill power specific kinetic parametersAdvanced Powder Technology, 2014
- Research on Mechanism of Ultrasound Enhancing and the Experiment Based on Softness Abrasive FlowJournal of Mechanical Engineering, 2014
- Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDMInternational Journal of Machine Tools and Manufacture, 2014
- Characterization of acoustic cavitation in water and molten aluminum alloyUltrasonics Sonochemistry, 2013
- Production of polymer particles below 5 μm by wet grindingPowder Technology, 2012
- Mechanistic and kinetic investigations in ultrasound assisted acid catalyzed biodiesel synthesisChemical Engineering Journal, 2012
- Numerical Simulation of a Near-Wall Bubble Collapse in an Ultrasonic FieldJournal of Fluid Science and Technology, 2009
- The use of ultrasonic cavitation peening to improve micro-burr-free surfacesThe International Journal of Advanced Manufacturing Technology, 2006
- Analysis of Rayleigh–Plesset dynamics for sonoluminescing bubblesJournal of Fluid Mechanics, 1998