Residual Stress, Microstructure and Mechanical Properties in Thick 6005A-T6 Aluminium Alloy Friction Stir Welds
Open Access
Abstract
Plates (37 mm thick) of 6005A-T6 aluminum alloy were butt joined by a single-sided and double-sided friction stir welding (FSW). The 3D residual stresses in the joints were determined using neutron diffraction. The microstructures were characterized by a transmission electron microscope (TEM) and electron backscatter diffraction (EBSD). In the single-sided FSW specimen, there were acceptable mechanical properties with a tensile strength of 74.4% of base metal (BM) and low residual stresses with peak magnitudes of approximately 37.5% yield strength of BM were achieved. The hardness is related to the grain size of the nugget zone (NZ), and in this study, precipitations were dissolved due to the high heat input. In the double-sided FSW specimen, there were good mechanical properties with a tensile strength of 80.8% of BM, but high residual stresses with peak magnitudes of approximately 70% yield strength of BM were obtained. The heat input by the second pass provided an aging environment for the first-pass weld zone where the dissolved phases were precipitated and residual stresses were relaxed.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (2017YFA0403704)
- National Natural Science Foundation of China (11605293; 51327902)
This publication has 34 references indexed in Scilit:
- Microstructure characterization and mechanism of fatigue crack initiation near pores for 6005A CMT welded jointMaterials Science and Engineering: A, 2017
- Assessing residual stresses in friction stir welding: neutron diffraction and nanoindentation methodsThe International Journal of Advanced Manufacturing Technology, 2017
- Formation and mechanical properties of stationary shoulder friction stir welded 6005A-T6 aluminum alloyMaterials & Design (1980-2015), 2014
- Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and propertiesProgress in Materials Science, 2012
- Analysis of residual stresses in thick aluminum friction stir welded butt jointsMaterials & Design (1980-2015), 2011
- Friction stir welding of aluminium alloysInternational Materials Reviews, 2009
- Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6Materials Science and Engineering: A, 2008
- In situ neutron diffraction measurements of temperature and stresses during friction stir welding of 6061-T6 aluminium alloyScience and Technology of Welding and Joining, 2007
- Evaluation of the microstructure and mechanical properties of friction stir welded 6005 aluminum alloyMaterials Science and Technology, 2003
- Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir weldsScience and Technology of Welding and Joining, 2003