Experimental and kinetic analysis of low to intermediate temperature auto-ignition of binary ethylene-acetylene blends
Open Access
- 13 February 2026
- journal article
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
- Vol. 206 (3) , 140-150
Abstract
Understanding the ignition characteristics of binary hydrocarbon blends is essential for designing high-speed propulsion systems such as scramjets, where ignition under short residence time is a critical challenge. In this work, the ignition delay behaviour of ethylene-acetylene/air mixtures was examined through shock tube experiments and kinetic simulations under engine-relevant conditions. Ethylene was used as the primary fuel and blended with acetylene at 5%, 10%, and 20% by volume to form binary mixtures, at an equivalence ratio of 1.0, temperatures between 560–1030 K, and pressures of 2.5–9 bar. The ignition delay time was determined from peak pressure rise and CH* chemiluminescence behind the reflected shock. Unlike previous blended fuel studies dominated by saturated hydrocarbons, this work presents a comprehensive dataset for ethylene-acetylene blends at low to intermediate temperatures and increasing the acetylene fraction from 5% to 20% reduces the ignition delay time by up to 50–60% in the 700–850 K and 2–5 bar regime. Numerical simulations were performed using ANSYS Chemkin in a closed, homogeneous, constant-volume reactor with the NUIG, ARAMCO, LLNL, and San Diego mechanisms. The sensitivity and rate-of-production analyses reveal that ignition is governed by HO2–H2O2 radical chemistry, with the thermal decomposition of H2O2 triggering rapid OH formation. Acetylene enhances ignition by promoting the regeneration of HCCO radicals and accelerating the transition to chain-branching chemistry.Keywords
This publication has 30 references indexed in Scilit:
- An experimental and kinetic modeling study of the ignition delay characteristics of binary blends of ethane/propane and ethylene/propane in multiple shock tubes and rapid compression machines over a wide range of temperature, pressure, equivalence ratio, and dilutionCombustion and Flame, 2021
- Autoignition and preliminary heat release of gasoline surrogates and their blends with ethanol at engine-relevant conditions: Experiments and comprehensive kinetic modelingCombustion and Flame, 2021
- Investigation of Ignition Delay for Low Molecular Weight Hydrocarbon Fuel by Using Shock Tube in Reflected Shock ModeJournal of the Geological Society of India, 2019
- An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurementsCombustion and Flame, 2018
- Auto-ignitions of a methane/air mixture at high and intermediate temperaturesShock Waves, 2016
- A shock tube study of ignition delay in the combustion of ethyleneCombustion and Flame, 2011
- A rapid compression machine study of the oxidation of propane in the negative temperature coefficient regimeCombustion and Flame, 2008
- Ethane ignition and oxidation behind reflected shock wavesCombustion and Flame, 2007
- Kinetics of ethane oxidationInternational Journal of Chemical Kinetics, 1991
- Ethylene pyrolysis and oxidation: A kinetic modeling studyInternational Journal of Chemical Kinetics, 1990