Investigation of a Photovoltaic–Thermal Solar Dryer System with Double-Pass Solar Air Collectors and Absorber Surfaces Enhanced with Graphene Nanoparticles
Authors:
Open Access
- 31 January 2024
- journal article
- research article
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 49 (8) , 11425-11443
Abstract
As a result of increasing energy demand, seeking eco-friendly and sustainable energy resources increases the interest in renewable energy, specifically solar energy. In this study, a novel photovoltaic–thermal solar dryer system with double-pass solar air collectors and nano-enhanced absorber surface was developed, and its performance was experimentally investigated. Initially, a double-pass solar dryer (DPSD) with an absorber surface of flexible aluminum ducts coated with black matte paint was produced. Then, a double-pass solar dryer (NDPSD) consisting of flexible aluminum ducts coated with graphene and black paint was designed. These two systems were experimentally and simultaneously examined, and parameters such as energy and exergy efficiency, drying rate, and moisture ratio, which are the performance indicators of solar air collectors and the drying process, were analyzed. The sustainability parameters were also considered as a part of the analysis. The mean thermal efficiency of the solar air collectors for DPSD and NDPSD was calculated as 57.23 and 73.36%, respectively, where the airflow rates were measured as 0.024 and 0.017 kg/s. Furthermore, under the same airflow rate conditions, while the mean exergy efficiency of the collector was 27.77% for NDPSD, it was calculated as 16.64% for DPSD. Moreover, exergy efficiencies of the drying chamber varied between 27.35% and 82.20% for NDPSD and between 21.03 and 81.25% for DPSD, under the airflow rates of 0.012–0.016 kg/s conditions, respectively.Keywords
Funding Information
- Gazi University
This publication has 52 references indexed in Scilit:
- Effect of water depth on a novel absorber plate of pyramid solar still coated with TiO2 nano black paintJournal of Cleaner Production, 2019
- Performance evaluation of a new counter flow double pass solar air heater with turbulatorsSolar Energy, 2018
- Evaluation of a novel, low-cost plastic solar air heater for turkey broodingEnergy for Sustainable Development, 2018
- On the performance of a baffled glazed-bladed entrance solar air heaterApplied Thermal Engineering, 2018
- Energy and exergy analysis of solar air heater having new design absorber plate with conical surfaceApplied Thermal Engineering, 2018
- Energy, exergy, economic and environmental (4E) analyses of flat-plate and V-groove solar air collectors based on aluminium and copperSolar Energy, 2017
- Experimentally derived efficiency and exergy analysis of a new solar air heater having different surface shapesRenewable Energy, 2013
- Low cost solar air heaterEnergy Conversion and Management, 2012
- Experimental performance of single and double pass solar air heater with fins and steel wire mesh as absorberApplied Energy, 2010
- Agricultural solar air collector made from low-cost plastic packing filmRenewable Energy, 2001