Erdem Çiftçi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Erdem Çiftçi has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Murat Öztürk
9 shared publicationsAdnan Sözen
8 shared publications- Adnan Sözen
Gazi Üniversitesi
4 shared publications - Murat Öztürk
Milli Savunma Üniversitesi
4 shared publications - Azim Doğuş Tuncer
Department of Energy Systems Engineering, Faculty of Engineering-Architecture, Burdur Mehmet Akif Ersoy University, Burdur, Turkey
3 shared publications Metin Gürü
Chemical Engineering Department, Gazi University, Ankara, Turkey
3 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 160 (1) , 33
Numerical Simulation of Corrugated Heat Exchanger Utilization for Sodium-Cooled Fast Reactors
In this study, the heat transfer performance of water-based SiC nanofluids in a corrugated shell-and-tube heat exchanger for sodium-cooled nuclear reactor applications was numerically investigated. Liquid sodium was used as the hot fluid, while pure water, 1% SiC/Water, and 3% SiC/Water nanofluids were used as cooling fluids. The analyses were performed under Re = 6500 and Re = 12,700 conditions. Under the Re = 6500 condition, the sodium outlet temperatures for pure water, 1% SiC/Water, and 3% SiC/Water were obtained as 396 °C, 394.8 °C, and 391 °C, respectively. Under the Re = 12,700 condition, these values were 407.11 °C, 405.66 °C, and 402.47 °C, respectively. The total heat transfer rate was calculated to be approximately 16.5–17.0 kW at Re = 6500 and approximately 30.3–31.2 kW at Re = 12,700. The pressure drop values remained at low levels, and the 3% SiC/Water nanofluid provided the most suitable balance between heat transfer enhancement and hydraulic loss.
- 23 October 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 160 (1) , 33
Open AccessNumerical Simulation of Corrugated Heat Exchanger Utilization for Sodium-Cooled Fast Reactors
In this study, the heat transfer performance of water-based SiC nanofluids in a corrugated shell-and-tube heat exchanger for sodium-cooled nuclear reactor applications was numerically investigated. Liquid sodium was used as the hot fluid, while pure water, 1% SiC/Water, and 3% SiC/Water nanofluids were used as cooling fluids. The analyses were performed under Re = 6500 and Re = 12,700 conditions. Under the Re = 6500 condition, the sodium outlet temperatures for pure water, 1% SiC/Water, and 3% SiC/Water were obtained as 396 °C, 394.8 °C, and 391 °C, respectively. Under the Re = 12,700 condition, these values were 407.11 °C, 405.66 °C, and 402.47 °C, respectively. The total heat transfer rate was calculated to be approximately 16.5–17.0 kW at Re = 6500 and approximately 30.3–31.2 kW at Re = 12,700. The pressure drop values remained at low levels, and the 3% SiC/Water nanofluid provided the most suitable balance between heat transfer enhancement and hydraulic loss.
- 22 March 2024
- Published by Türkiye Enerji Stratejileri ve Politikalari Araştirma Merkezi (TESPAM) in International Journal of Energy Studies
- Vol. 9 (1) , 135-153
Numerical analysis of the journal bearings of Keban Hydroelectric Power Plant using different type nanofluids
Energy production in line with demand rapidly increases. Fossil fuel systems in use today pose a great threat to the future of the world and in this sense, the interest to the renewable energy sources such as hydroelectric energy systems is increasing. In this study, the heating problem of the journal bearings one of the parts of the hydroelectric energy systems was evaluated, various analysis were performed with the Computational Fluid Dynamics (CFD) approach to eliminate this problem and the results obtained were shared. Initial analyses were performed and evaluated for Mobil DTE 68 oil, which was commonly used as a refrigerant in journal bearings. Then, Al2O3 nanoparticles at concentrations of 3%, 7% and 10% were then added to the refrigerant oil and necessary analyses were performed for these three conditions. Finally, similar analyses were performed in the 3%, 7% and 10% concentration for SiO2. When the obtained temperature changes were examined accordingly, it was obtained that the increase in the concentration of nanoparticles exhibited a characteristic that was inversely proportional to the surface temperature. With the addition of nanoparticles, surface temperatures have been observed to decrease from 80°C to 68°C, but the effect on sharp corners is quite low. In this sense, it has been obtained that nanoparticles can significantly increase the thermal characteristics of Mobil DTE 68 oil, and it has been concluded that nanofluids may be an alternative solution for the overheating problem that occurs in journal bearings.
- 22 March 2024
- Published by Türkiye Enerji Stratejileri ve Politikalari Araştirma Merkezi (TESPAM) in International Journal of Energy Studies
- Vol. 9 (1) , 135-153
Numerical analysis of the journal bearings of Keban Hydroelectric Power Plant using different type nanofluids
Energy production in line with demand rapidly increases. Fossil fuel systems in use today pose a great threat to the future of the world and in this sense, the interest to the renewable energy sources such as hydroelectric energy systems is increasing. In this study, the heating problem of the journal bearings one of the parts of the hydroelectric energy systems was evaluated, various analysis were performed with the Computational Fluid Dynamics (CFD) approach to eliminate this problem and the results obtained were shared. Initial analyses were performed and evaluated for Mobil DTE 68 oil, which was commonly used as a refrigerant in journal bearings. Then, Al2O3 nanoparticles at concentrations of 3%, 7% and 10% were then added to the refrigerant oil and necessary analyses were performed for these three conditions. Finally, similar analyses were performed in the 3%, 7% and 10% concentration for SiO2. When the obtained temperature changes were examined accordingly, it was obtained that the increase in the concentration of nanoparticles exhibited a characteristic that was inversely proportional to the surface temperature. With the addition of nanoparticles, surface temperatures have been observed to decrease from 80°C to 68°C, but the effect on sharp corners is quite low. In this sense, it has been obtained that nanoparticles can significantly increase the thermal characteristics of Mobil DTE 68 oil, and it has been concluded that nanofluids may be an alternative solution for the overheating problem that occurs in journal bearings.
- Open Access
- 31 January 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 49 (8) , 11425-11443
Investigation of a Photovoltaic–Thermal Solar Dryer System with Double-Pass Solar Air Collectors and Absorber Surfaces Enhanced with Graphene Nanoparticles
As a result of increasing energy demand, seeking eco-friendly and sustainable energy resources increases the interest in renewable energy, specifically solar energy. In this study, a novel photovoltaic–thermal solar dryer system with double-pass solar air collectors and nano-enhanced absorber surface was developed, and its performance was experimentally investigated. Initially, a double-pass solar dryer (DPSD) with an absorber surface of flexible aluminum ducts coated with black matte paint was produced. Then, a double-pass solar dryer (NDPSD) consisting of flexible aluminum ducts coated with graphene and black paint was designed. These two systems were experimentally and simultaneously examined, and parameters such as energy and exergy efficiency, drying rate, and moisture ratio, which are the performance indicators of solar air collectors and the drying process, were analyzed. The sustainability parameters were also considered as a part of the analysis. The mean thermal efficiency of the solar air collectors for DPSD and NDPSD was calculated as 57.23 and 73.36%, respectively, where the airflow rates were measured as 0.024 and 0.017 kg/s. Furthermore, under the same airflow rate conditions, while the mean exergy efficiency of the collector was 27.77% for NDPSD, it was calculated as 16.64% for DPSD. Moreover, exergy efficiencies of the drying chamber varied between 27.35% and 82.20% for NDPSD and between 21.03 and 81.25% for DPSD, under the airflow rates of 0.012–0.016 kg/s conditions, respectively.
- 31 January 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 49 (8) , 11425-11443
Open AccessInvestigation of a Photovoltaic–Thermal Solar Dryer System with Double-Pass Solar Air Collectors and Absorber Surfaces Enhanced with Graphene Nanoparticles
As a result of increasing energy demand, seeking eco-friendly and sustainable energy resources increases the interest in renewable energy, specifically solar energy. In this study, a novel photovoltaic–thermal solar dryer system with double-pass solar air collectors and nano-enhanced absorber surface was developed, and its performance was experimentally investigated. Initially, a double-pass solar dryer (DPSD) with an absorber surface of flexible aluminum ducts coated with black matte paint was produced. Then, a double-pass solar dryer (NDPSD) consisting of flexible aluminum ducts coated with graphene and black paint was designed. These two systems were experimentally and simultaneously examined, and parameters such as energy and exergy efficiency, drying rate, and moisture ratio, which are the performance indicators of solar air collectors and the drying process, were analyzed. The sustainability parameters were also considered as a part of the analysis. The mean thermal efficiency of the solar air collectors for DPSD and NDPSD was calculated as 57.23 and 73.36%, respectively, where the airflow rates were measured as 0.024 and 0.017 kg/s. Furthermore, under the same airflow rate conditions, while the mean exergy efficiency of the collector was 27.77% for NDPSD, it was calculated as 16.64% for DPSD. Moreover, exergy efficiencies of the drying chamber varied between 27.35% and 82.20% for NDPSD and between 21.03 and 81.25% for DPSD, under the airflow rates of 0.012–0.016 kg/s conditions, respectively.
- Open Access
- 28 December 2023
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 11 (4) , 1162-1170
Değişken Sayıda Delikler İçeren Emici Plakalara Sahip Güneş Enerjili Hava Isıtıcısının Sayısal Analizi
Dünya nüfusundaki meydana gelen artışlar, enerjiye olan talepleri de doğrudan etkilemektedir. Nüfus artışı ile doğrudan etkilenen enerji taleplerine karşı tepki verebilmek ve sürdürülebilir bir gelecek sağlamak amacıyla farklı enerji kaynakları arayışları ortaya çıkmaktadır. Son zamanlarda popüler bir hale gelen yenilenebilir enerji kaynaklarının en temeli olan güneş enerjisinden elektrik üretimi ve ısıl uygulamalar ilerlemeye devam etmektedir. Bu çalışmada güneş enerjisinden ısıl enerji elde etmek amacıyla kullanılan güneş enerjili hava ısıtıcıların performansının arttırılması amaçlanmış ve farklı emici yüzeylere sahip güneş enerjili hava ısıtıcısı modelleri geliştirilmiştir. Geliştirilmiş olan bu modellerin analizleri Hesaplamalı Akışkanlar Dinamiği (HAD) yaklaşımı ile gerçekleştirilmiş ve sonuçlar değerlendirilmiştir. Başlangıçta geleneksel düz emici plakalı güneş enerjili hava ısıtıcısı modellenmiştir. Daha sonra düz plakaya sırasıyla 2, 4 ve 8 adet delikler eklenmiş ve aynı şartlar altında sistem analizleri gerçekleştirilmiştir. Yapılan bu analizler sonucu benzer oranlarda basınç düşüşleri görülmüş ve hava akış hızları oldukça yakın oranda azalmıştır. Bunun yanı sıra giriş ve çıkış noktası arasındaki sıcaklık farkları düz plakalı, 2 delikli, 4 delikli ve 8 delikli model için sırasıyla 12,6℃, 10℃, 13,5℃ ve 16,2℃ olarak elde edilmiştir. Elde edilen sonuçlara bağlı olarak delik sayısı ile sistem performansında arttığı ve oluşturulan deliklerin türbülans etkisi yaratarak ısı transferini önemli ölçüde iyileştirdiği gözlemlenmiştir.
- 28 December 2023
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 11 (4) , 1162-1170
Open AccessDeğişken Sayıda Delikler İçeren Emici Plakalara Sahip Güneş Enerjili Hava Isıtıcısının Sayısal Analizi
Dünya nüfusundaki meydana gelen artışlar, enerjiye olan talepleri de doğrudan etkilemektedir. Nüfus artışı ile doğrudan etkilenen enerji taleplerine karşı tepki verebilmek ve sürdürülebilir bir gelecek sağlamak amacıyla farklı enerji kaynakları arayışları ortaya çıkmaktadır. Son zamanlarda popüler bir hale gelen yenilenebilir enerji kaynaklarının en temeli olan güneş enerjisinden elektrik üretimi ve ısıl uygulamalar ilerlemeye devam etmektedir. Bu çalışmada güneş enerjisinden ısıl enerji elde etmek amacıyla kullanılan güneş enerjili hava ısıtıcıların performansının arttırılması amaçlanmış ve farklı emici yüzeylere sahip güneş enerjili hava ısıtıcısı modelleri geliştirilmiştir. Geliştirilmiş olan bu modellerin analizleri Hesaplamalı Akışkanlar Dinamiği (HAD) yaklaşımı ile gerçekleştirilmiş ve sonuçlar değerlendirilmiştir. Başlangıçta geleneksel düz emici plakalı güneş enerjili hava ısıtıcısı modellenmiştir. Daha sonra düz plakaya sırasıyla 2, 4 ve 8 adet delikler eklenmiş ve aynı şartlar altında sistem analizleri gerçekleştirilmiştir. Yapılan bu analizler sonucu benzer oranlarda basınç düşüşleri görülmüş ve hava akış hızları oldukça yakın oranda azalmıştır. Bunun yanı sıra giriş ve çıkış noktası arasındaki sıcaklık farkları düz plakalı, 2 delikli, 4 delikli ve 8 delikli model için sırasıyla 12,6℃, 10℃, 13,5℃ ve 16,2℃ olarak elde edilmiştir. Elde edilen sonuçlara bağlı olarak delik sayısı ile sistem performansında arttığı ve oluşturulan deliklerin türbülans etkisi yaratarak ısı transferini önemli ölçüde iyileştirdiği gözlemlenmiştir.
- 18 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 51, 219-228
A numerical investigation on the utilization of a depleted natural gas field for seasonal hydrogen storage: A case study for Değirmenköy gas field
- 18 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 51, 219-228
A numerical investigation on the utilization of a depleted natural gas field for seasonal hydrogen storage: A case study for Değirmenköy gas field
- 27 September 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 236
Analysis of a novel V-grooved double pass photovoltaic thermal solar dryer including thermal energy storage
- 27 September 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 236
Analysis of a novel V-grooved double pass photovoltaic thermal solar dryer including thermal energy storage