Lubricant levitation in high-speed bearings: An experimental approach
- 1 April 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Abstract
Lubricant flow in rolling element bearings is quite complex due to the motion of balls, cage, and inner and outer races. This phenomenon is further complicated at high speeds. This study aims to experimentally investigate the phenomenon of lubricant condition on bearing surfaces under high-speed (HS) conditions. The primary tests were conducted using a dedicated test rig with a high-speed rotating ball and inner race and outer race setups. At high speeds, lubricant levitated from the surface of the ball and inner and outer race. Lubricant levitation was found to be governed by three factors: surface speed, lubricant properties, and surface finish. A high-speed camera was used to capture the lubricant levitation at various surface speeds ranging from 3.8 to 27.9 m/s. The experimental results revealed that as the speed increases, the aerodynamic Leidenfrost effect becomes significant, which inhibits lubricant adhesion to the bearing surfaces. The influence of lubricant properties was investigated by testing adhesion with lubricants of varying viscosities, while the effect of surface finish was examined by comparing coatings with different wettability characteristics. The observations from this investigation provide fundamental insight into the critical parameters influencing lubricant levitation, adhesion, and, consequently, the lubrication condition in high-speed tribology applications.Keywords
This publication has 64 references indexed in Scilit:
- Investigation on the friction heat generation rate of ball bearings at ultra-high rotation speedThe International Journal of Advanced Manufacturing Technology, 2023
- Research and prospect of textured sliding bearingThe International Journal of Advanced Manufacturing Technology, 2022
- Influence of the cage on the migration and distribution of lubricating oil inside a ball bearingFriction, 2021
- Assessment and Interpretation of Surface Wettability Based on Sessile Droplet Contact Angle Measurement: Challenges and OpportunitiesAdvanced Materials Interfaces, 2019
- Identifying the optimal interfacial parameter correlated with hydrodynamic lubricationFriction, 2016
- Experimental Study on Lubrication Film Thickness Under Different Interface WettabilitiesTribology Letters, 2014
- The Effect of Wetting and Surface Energy on the Friction and Slip in Oil-Lubricated ContactsTribology Letters, 2013
- Rolling Bearing Lubricants2013
- Lubrication safety in high‐speed ball‐bearingsLubrication Science, 1997
- Determination of the surface tension of surfactant solutions applying the method of Lecomte du Noüy (ring tensiometer)Colloid and Polymer Science, 1981