Joseph Leo Misenar
Research Subjects
Joseph Leo Misenar has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Farshid Sadeghi
School of Mechanical Engineering, Purdue University
2 shared publications - Ujjawal Arya
School of Mechanical Engineering, Purdue University
2 shared publications
Latest Publications
- Open Access
- 27 October 2025
- Published by Taylor & Francis in Tribology Transactions
- Vol. 69 (1) , 99-108
Cage Friction Measurements in High-Speed Bearings
- 27 October 2025
- Published by Taylor & Francis in Tribology Transactions
- Vol. 69 (1) , 99-108
Open AccessCage Friction Measurements in High-Speed Bearings
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Lubricant levitation in high-speed bearings: An experimental approach
Lubricant flow in rolling element bearings is quite complex due to the motion of balls, cage, and inner and outer races. This phenomenon is further complicated at high speeds. This study aims to experimentally investigate the phenomenon of lubricant condition on bearing surfaces under high-speed (HS) conditions. The primary tests were conducted using a dedicated test rig with a high-speed rotating ball and inner race and outer race setups. At high speeds, lubricant levitated from the surface of the ball and inner and outer race. Lubricant levitation was found to be governed by three factors: surface speed, lubricant properties, and surface finish. A high-speed camera was used to capture the lubricant levitation at various surface speeds ranging from 3.8 to 27.9 m/s. The experimental results revealed that as the speed increases, the aerodynamic Leidenfrost effect becomes significant, which inhibits lubricant adhesion to the bearing surfaces. The influence of lubricant properties was investigated by testing adhesion with lubricants of varying viscosities, while the effect of surface finish was examined by comparing coatings with different wettability characteristics. The observations from this investigation provide fundamental insight into the critical parameters influencing lubricant levitation, adhesion, and, consequently, the lubrication condition in high-speed tribology applications.
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Lubricant levitation in high-speed bearings: An experimental approach
Lubricant flow in rolling element bearings is quite complex due to the motion of balls, cage, and inner and outer races. This phenomenon is further complicated at high speeds. This study aims to experimentally investigate the phenomenon of lubricant condition on bearing surfaces under high-speed (HS) conditions. The primary tests were conducted using a dedicated test rig with a high-speed rotating ball and inner race and outer race setups. At high speeds, lubricant levitated from the surface of the ball and inner and outer race. Lubricant levitation was found to be governed by three factors: surface speed, lubricant properties, and surface finish. A high-speed camera was used to capture the lubricant levitation at various surface speeds ranging from 3.8 to 27.9 m/s. The experimental results revealed that as the speed increases, the aerodynamic Leidenfrost effect becomes significant, which inhibits lubricant adhesion to the bearing surfaces. The influence of lubricant properties was investigated by testing adhesion with lubricants of varying viscosities, while the effect of surface finish was examined by comparing coatings with different wettability characteristics. The observations from this investigation provide fundamental insight into the critical parameters influencing lubricant levitation, adhesion, and, consequently, the lubrication condition in high-speed tribology applications.