Application of fractal theory to estimation of equivalent diameters of airborne carbon nanotube and nanofiber agglomerates
Open Access
- 7 March 2018
- journal article
- research article
- Published by Taylor & Francis in Aerosol Science and Technology
- Vol. 52 (5) , 597-608
Abstract
Understanding transport characteristics of airborne nanotubes and nanofibers is important for assessing their fate in the respiratory system. Typically, diffusion and aerodynamic diameters capture key deposition mechanisms of near-spherical particles such as diffusion and impaction in the submicrometer size range. For nonspherical particles with high aspect ratios, such as aerosolized carbon nanotubes, these diameters can vary widely, requiring their independent measurement. The objective of this study was to develop an approach to provide approximate estimates of aerodynamic- and diffusion-equivalent diameters of airborne carbon nanotubes (CNTs) and carbon nanofibers (CNFs) using their morphological characteristics obtained from electron micrographs. The as-received CNT and CNF materials were aerosolized using different techniques such as dry dispersion and nebulization. Mobility and aerodynamic diameters of test aerosol were directly deduced from tandem measurement of particle mobility and mass. The same test aerosol was mobility-classified and subsequently collected on a microscopy grid for transmission electron microscopy (TEM) analysis. TEM micrographs were used to obtain projected area, maximum projected length, and two-dimensional (2-D) radius of gyration of test particles. Estimates of the aerodynamic diameter and the diffusion diameter were obtained by applying the fractal theory developed for aerosol agglomerates of primary spherical particles. After accounting for the particle dynamic shape factor, estimated aerodynamic diameters agreed with those from the direct measurements (using tandem mobility-mass technique) within 30–40% for the agglomerates with relatively open structures while the diffusion diameters agreed within 40–50%. The uncertainty of these estimates mainly depends on degree of overlapping structures in the microscopy image and nonuniformity in tube diameter. The approach could be useful in calculating approximate airborne properties from microscopy images of CNT and CNF agglomerates with relatively open structures. This article not subject to US copyright lawKeywords
Funding Information
- National Institute for Occupational Safety and Health (Nanotechnology Research Center (NTRC) program (CAN ZJLS))
This publication has 31 references indexed in Scilit:
- Multi-walled carbon nanotubes: sampling criteria and aerosol characterizationInhalation Toxicology, 2012
- Exposure and Emissions Monitoring during Carbon Nanofiber Production—Part I: Elemental Carbon and Iron–Soot AerosolsAnnals of Occupational Hygiene, 2011
- Genotoxicity of carbon nanofibers: Are they potentially more or less dangerous than carbon nanotubes or asbestos?Toxicology and Applied Pharmacology, 2011
- Asbestos, carbon nanotubes and the pleural mesothelium: a review and the hypothesis regarding the role of long fibre retention in the parietal pleura, inflammation and mesotheliomaParticle and Fibre Toxicology, 2010
- Relationships Among Particle Number, Surface Area, and Respirable Mass Concentrations in Automotive Engine ManufacturingJournal of Occupational and Environmental Hygiene, 2008
- Aerosolization of Single-Walled Carbon Nanotubes for an Inhalation StudyInhalation Toxicology, 2008
- Ultrafine and Respirable Particles in an Automotive Grey Iron FoundryAnnals of Occupational Hygiene, 2007
- A RECIPE FOR IMAGE CHARACTERIZATION OF FRACTAL-LIKE AGGREGATESJournal of Aerosol Science, 1999
- Novel method to classify aerosol particles according to their mass-to-charge ratio—Aerosol particle mass analyserJournal of Aerosol Science, 1996
- Analysis of Fractal Cluster Morphology Parameters: Structural Coefficient and Density Autocorrelation Function CutoffJournal of Colloid and Interface Science, 1995