Super elastic system using parallel spine frames with steel braces
Authors:
- 6 November 2020
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (3) , 974-994
Abstract
To reduce the seismic response and residual deformation of structures, this study proposes a super elastic bracing system comprising parallel spine frames with steel rods acting as the braces connecting adjacent spine frames. The brace‐end connections are located on the outer side of the pin supports of spine frames to ensure that the axial deformation of the braces is lower than that of a regular bracing system with identical brace angles. To verify the feasibility and elastic range of the proposed system, cyclic loading tests were conducted using scaled specimens consisting of two spine frames with four different brace configurations. Numerical models created in OpenSees were used to simulate the loading tests appropriately. Four evaluation methods were developed for predicting the force and deformation relation considering the geometrical nonlinearity of the proposed system. Through parametric analyses, the influence of key parameters on structural behaviors is clarified, and the applicability of the evaluation methods is investigated.Keywords
This publication has 33 references indexed in Scilit:
- Pin‐supported walls for enhancing the seismic performance of building structuresEarthquake Engineering & Structural Dynamics, 2012
- RESPONSE PREDICTION OF CONTROLLED ROCKING FRAME USING BUCKLING RESTRAINED BRACEJournal of Structural and Construction Engineering (Transactions of AIJ), 2011
- SEISMIC PERFORMANCE OF CONTROLLED ROCKING FRAMES WITH SHEAR FUSE AND PT WIRE ANCHORAGEJournal of Structural and Construction Engineering (Transactions of AIJ), 2010
- Self‐centering steel connections with steel bars and a discontinuous composite slabEarthquake Engineering & Structural Dynamics, 2008
- Seismic self‐centering steel beam‐to‐column moment connections using bolted friction devicesEarthquake Engineering & Structural Dynamics, 2008
- Self-Centering Energy Dissipative Bracing System for the Seismic Resistance of Structures: Development and ValidationJournal of Structural Engineering, 2008
- A design procedure for tied braced framesEarthquake Engineering & Structural Dynamics, 2007
- Behavior and Design of Posttensioned Steel Frame SystemsJournal of Structural Engineering, 2007
- Rocking Wall–Frame Structures with Supplemental Tendon SystemsJournal of Structural Engineering, 2004
- Performance Evaluation of Friction Spring Seismic DamperJournal of Structural Engineering, 2000