Xingchen Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xingchen Chen has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
Hiroshi Tagawa
3 shared publications- Hiroshi Tagawa
Hiroshima University
3 shared publications Defeng Xu
1 shared publication- Feifei Sun
State Key Laboratory of Disaster Reduction in Civil Engineering Tongji University Shanghai China
1 shared publication Hao Lu
China Railway First Survey and Design Institute Group Co. Ltd. Xi'an China
1 shared publicationHonghui Qi
1 shared publication
Latest Publications
- Open Access
- 6 December 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 117
Double small-sized lever-arm system with steel slit damper for seismic energy dissipation of structures
- 6 December 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 117
Open AccessDouble small-sized lever-arm system with steel slit damper for seismic energy dissipation of structures
- 27 November 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 117
Early-warning approach for secondary collapse of RC frame structure in semi-ruined state under aftershocks based on K-LSTM model
- 27 November 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 117
Early-warning approach for secondary collapse of RC frame structure in semi-ruined state under aftershocks based on K-LSTM model
- Open Access
- 23 September 2025
- Published by Elsevier in Structures
- Vol. 81
Gusset plate friction damper with double plate core buckling-restrained brace
- 23 September 2025
- Published by Elsevier in Structures
- Vol. 81
Open AccessGusset plate friction damper with double plate core buckling-restrained brace
- 26 September 2024
- Published by Wiley in Earthquake Engineering and Resilience
- Vol. 3 (3) , 432-446
Seismic vulnerability assessment of a railway beam bridge considering brittle failure of the restrainer in a friction pendulum system
The restrainers in the friction pendulum system (FPS) may experience brittle failure during an earthquake. Strong nonlinear behavior should be considered to precisely assess the seismic performance of the railway beam bridge under an earthquake. A seismic vulnerability assessment was performed based on a typical simply supported railway beam bridge. Three different models of the FPS in fixed direction were considered: elastic restrainer model, brittle restrainer model, and nonrestrainer model. Through dynamic analysis, the responses of the railway beam bridge were obtained, including the force and displacement of the FPSs, the curvature ductility at the pier bottom, and transverse dislocation at the beam gap. The analysis results pointed out when the earthquake intensity exceeded the fundamental intensity, the brittle failure of the restrainers was very likely to happen. The sudden release of energy introduced a displacement pulse to the FPS. The elastic restrainer model overestimated the force demand and damage probability of the substructures but underestimated the FPS displacement and dislocation at the beam gap. The nonrestrainer model seriously underestimated the force demand of the substructure and the FPS displacement under strong earthquakes. The brittle restrainer model could reflect the nonuniform failure of the restrainers and provide a more accurate estimate of the transverse dislocation at the beam gap.
- 26 September 2024
- Published by Wiley in Earthquake Engineering and Resilience
- Vol. 3 (3) , 432-446
Seismic vulnerability assessment of a railway beam bridge considering brittle failure of the restrainer in a friction pendulum system
The restrainers in the friction pendulum system (FPS) may experience brittle failure during an earthquake. Strong nonlinear behavior should be considered to precisely assess the seismic performance of the railway beam bridge under an earthquake. A seismic vulnerability assessment was performed based on a typical simply supported railway beam bridge. Three different models of the FPS in fixed direction were considered: elastic restrainer model, brittle restrainer model, and nonrestrainer model. Through dynamic analysis, the responses of the railway beam bridge were obtained, including the force and displacement of the FPSs, the curvature ductility at the pier bottom, and transverse dislocation at the beam gap. The analysis results pointed out when the earthquake intensity exceeded the fundamental intensity, the brittle failure of the restrainers was very likely to happen. The sudden release of energy introduced a displacement pulse to the FPS. The elastic restrainer model overestimated the force demand and damage probability of the substructures but underestimated the FPS displacement and dislocation at the beam gap. The nonrestrainer model seriously underestimated the force demand of the substructure and the FPS displacement under strong earthquakes. The brittle restrainer model could reflect the nonuniform failure of the restrainers and provide a more accurate estimate of the transverse dislocation at the beam gap.
- Open Access
Delayed-Action Mechanism of Buckling-Restrained Brace Using Gusset Plates with Multiple Slot Holes
Previous research has indicated that buckling-restrained braces (BRBs) increase the lateral story stiffness, resulting in a shortening of the natural period, which leads to an increase in the seismic input into the buildings, especially in high-rise buildings. Additionally, research has also revealed that the long-period seismic motions with a long duration possibly induce a difficulty to ensure the toughness of the BRB members, owing to the large cumulative strains caused by the repeated axial forces. To overcome these issues, this paper proposed a displacement-restraint buckling-restrained brace (DR-BRB) in which no axial force appears initially, and the axial force occurs with a delay under the designated vibration amplitude. Therefore, the natural period can maintain the same level as the moment frame. This study performed five cyclic loading tests to reveal the delayed-action mechanism of BRBs, using gusset plates with multiple slot holes. The test results confirmed that the designated starting point of the brace action is accurate, and the hysteretic behavior of the brace is good. Furthermore, the design equations of the joints were formulated and verified through the test results. Finally, the joint behavior and validity of the proposed design equations were verified by finite element analyses for the single bolt model and the overall joint model.
Open AccessDelayed-Action Mechanism of Buckling-Restrained Brace Using Gusset Plates with Multiple Slot Holes
Previous research has indicated that buckling-restrained braces (BRBs) increase the lateral story stiffness, resulting in a shortening of the natural period, which leads to an increase in the seismic input into the buildings, especially in high-rise buildings. Additionally, research has also revealed that the long-period seismic motions with a long duration possibly induce a difficulty to ensure the toughness of the BRB members, owing to the large cumulative strains caused by the repeated axial forces. To overcome these issues, this paper proposed a displacement-restraint buckling-restrained brace (DR-BRB) in which no axial force appears initially, and the axial force occurs with a delay under the designated vibration amplitude. Therefore, the natural period can maintain the same level as the moment frame. This study performed five cyclic loading tests to reveal the delayed-action mechanism of BRBs, using gusset plates with multiple slot holes. The test results confirmed that the designated starting point of the brace action is accurate, and the hysteretic behavior of the brace is good. Furthermore, the design equations of the joints were formulated and verified through the test results. Finally, the joint behavior and validity of the proposed design equations were verified by finite element analyses for the single bolt model and the overall joint model.
- 28 March 2023
- Published by Wiley in Earthquake Engineering and Resilience
- Vol. 2 (1) , 131-157
Seismic performance of rocking‐delayed spine frame system with base initial gaps
This study proposes a rocking‐delayed spine frame system that provides initial gaps at the side column bases of the spine frame. This system exhibits a trade‐off behavior between the nonuplifting spine system and uplifting‐allowed rocking frame system. The feasibility of the proposed system was verified on 16 specimens using cyclic loading tests. An evaluation of the force–deformation relationship of the proposed system was proposed and verified by comparing it to the test results. The seismic performance of the proposed system was investigated using nonlinear time‐history analysis. The analysis results clarified the initial gap's influence on seismic responses. A trade‐off between the maximum story drift ratio, peak floor acceleration, and maximum shear force of the spine frame was revealed.
- 28 March 2023
- Published by Wiley in Earthquake Engineering and Resilience
- Vol. 2 (1) , 131-157
Seismic performance of rocking‐delayed spine frame system with base initial gaps
This study proposes a rocking‐delayed spine frame system that provides initial gaps at the side column bases of the spine frame. This system exhibits a trade‐off behavior between the nonuplifting spine system and uplifting‐allowed rocking frame system. The feasibility of the proposed system was verified on 16 specimens using cyclic loading tests. An evaluation of the force–deformation relationship of the proposed system was proposed and verified by comparing it to the test results. The seismic performance of the proposed system was investigated using nonlinear time‐history analysis. The analysis results clarified the initial gap's influence on seismic responses. A trade‐off between the maximum story drift ratio, peak floor acceleration, and maximum shear force of the spine frame was revealed.
- 6 November 2020
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (3) , 974-994
Super elastic system using parallel spine frames with steel braces
To reduce the seismic response and residual deformation of structures, this study proposes a super elastic bracing system comprising parallel spine frames with steel rods acting as the braces connecting adjacent spine frames. The brace‐end connections are located on the outer side of the pin supports of spine frames to ensure that the axial deformation of the braces is lower than that of a regular bracing system with identical brace angles. To verify the feasibility and elastic range of the proposed system, cyclic loading tests were conducted using scaled specimens consisting of two spine frames with four different brace configurations. Numerical models created in OpenSees were used to simulate the loading tests appropriately. Four evaluation methods were developed for predicting the force and deformation relation considering the geometrical nonlinearity of the proposed system. Through parametric analyses, the influence of key parameters on structural behaviors is clarified, and the applicability of the evaluation methods is investigated.
- 6 November 2020
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (3) , 974-994
Super elastic system using parallel spine frames with steel braces
To reduce the seismic response and residual deformation of structures, this study proposes a super elastic bracing system comprising parallel spine frames with steel rods acting as the braces connecting adjacent spine frames. The brace‐end connections are located on the outer side of the pin supports of spine frames to ensure that the axial deformation of the braces is lower than that of a regular bracing system with identical brace angles. To verify the feasibility and elastic range of the proposed system, cyclic loading tests were conducted using scaled specimens consisting of two spine frames with four different brace configurations. Numerical models created in OpenSees were used to simulate the loading tests appropriately. Four evaluation methods were developed for predicting the force and deformation relation considering the geometrical nonlinearity of the proposed system. Through parametric analyses, the influence of key parameters on structural behaviors is clarified, and the applicability of the evaluation methods is investigated.
- Open Access
- 2 May 2019
- Published by Vilnius Gediminas Technical University in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
- Vol. 25 (5) , 460-476
BOLTED CONNECTIONS FOR NON-INTERSECTING H-SECTION BEAM AND COLUMN IN STEEL MOMENT FRAMES
This research proposes connection configurations of two types for non-intersecting H-section steel beam and column. To elucidate the mechanical behavior of the proposed connections, full-scale moment connection tests and finite element analyses were conducted using T-shaped partial frame models. Comparisons between the proposed connections and regular intersecting connections demonstrate that the proposed connection is able to provide sufficient stiffness and energy-dissipation capacity if the beam and column flanges are designed to provide sufficient shear resistance. Then to understand the global behavior of frames using the proposed connections, pushover analyses of a two-story two-span frame were conducted. Because the bending moment of the beam acts on the column by a torque through the proposed connections, torsion spring models were incorporated for representing the proposed connections in 3D frame analysis. Analysis results showed that the girders and columns exhibited lower stiffness and strength than those of frames with intersecting connections because of torsion. To overcome this issue, torsion restraint by secondary beams with different configurations was discussed and optimal configuration was suggested. By utilizing the optimal configuration, torsion of girders and columns can be efficiently reduced into a similar level as that of regular intersecting connections.
- 2 May 2019
- Published by Vilnius Gediminas Technical University in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
- Vol. 25 (5) , 460-476
Open AccessBOLTED CONNECTIONS FOR NON-INTERSECTING H-SECTION BEAM AND COLUMN IN STEEL MOMENT FRAMES
This research proposes connection configurations of two types for non-intersecting H-section steel beam and column. To elucidate the mechanical behavior of the proposed connections, full-scale moment connection tests and finite element analyses were conducted using T-shaped partial frame models. Comparisons between the proposed connections and regular intersecting connections demonstrate that the proposed connection is able to provide sufficient stiffness and energy-dissipation capacity if the beam and column flanges are designed to provide sufficient shear resistance. Then to understand the global behavior of frames using the proposed connections, pushover analyses of a two-story two-span frame were conducted. Because the bending moment of the beam acts on the column by a torque through the proposed connections, torsion spring models were incorporated for representing the proposed connections in 3D frame analysis. Analysis results showed that the girders and columns exhibited lower stiffness and strength than those of frames with intersecting connections because of torsion. To overcome this issue, torsion restraint by secondary beams with different configurations was discussed and optimal configuration was suggested. By utilizing the optimal configuration, torsion of girders and columns can be efficiently reduced into a similar level as that of regular intersecting connections.