Torque ripple suppression of brushless DC motor drives using an alternating two‐phase and three‐phase conduction mode
Open Access
- 1 June 2020
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 13 (8) , 1622-1629
Abstract
Commutation torque ripple is an important factor affecting the performance of brushless DC (BLDC) motor drives. In order to suppress this torque ripple, an alternating conduction control strategy between the two‐phase and three‐phase conduction mode has been proposed in this study. During the non‐commutation periods, the conventional two‐phase conduction mode is selected to drive the BLDC motor. While during the commutation period, the commutation torque ripple is reduced by employing an alternating two‐phase and three‐phase conduction mode. By calculating the duty cycle of the three‐phase conduction mode, which indicates whether the rate of change in current in the incoming and outgoing phase is equal during the commutation interval, the commutation torque ripple is effectively reduced, while the current in the non‐commutated phase is maintained constant. Simulation and experimental results show that the proposed method can suppress the commutation torque ripple efficiently, particularly at high rotational speeds of the motor.Keywords
Funding Information
- National Natural Science Foundation of China (41727801)
This publication has 26 references indexed in Scilit:
- Commutation Torque Ripple Reduction in the BLDC Motor Using Modified SEPIC and Three-Level NPC InverterIEEE Transactions on Power Electronics, 2017
- Deadbeat Predictive Current Control of Permanent-Magnet Synchronous Motors with Stator Current and Disturbance ObserverIEEE Transactions on Power Electronics, 2016
- Fuzzy logic‐based loss minimisation scheme for brushless DC motor drive systemIET Power Electronics, 2016
- Improved Dynamic Behavior in BLDC Drives Using Model Predictive Speed and Current ControlIEEE Transactions on Industrial Electronics, 2015
- A Torque Ripple Compensation Technique for a Low-Cost Brushless DC Motor DriveIEEE Transactions on Industrial Electronics, 2015
- Torque-Ripple Mitigation for Brushless DC Machine Drive System Using One-Cycle Average Torque ControlIEEE Transactions on Industrial Electronics, 2014
- IGBT-Gating Failure Effect on a Fault-Tolerant Predictive Current-Controlled Five-Phase Induction Motor DriveIEEE Transactions on Industrial Electronics, 2014
- Dual-mode switching technique for reduction of commutation torque ripple of brushless dc motorIET Electric Power Applications, 2011
- Commutation Torque Ripple Reduction in Brushless DC Motor Drives Using a Single DC Current SensorIEEE Transactions on Power Electronics, 2004
- A new approach for minimum-torque-ripple maximum-efficiency control of BLDC motorIEEE Transactions on Industrial Electronics, 2000