Laser Velocimetry Measurements of Swirl and Squish Flows in an Engine with a Cylindrical Piston Bowl
Author:
- 1 February 1985
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Fluid-motion and turbulence phenomena important to fuel-spray dynamics, mixing, and combustion have been examined in a motored direct-injection engine using photon-correlation laser-Doppler velocimetry. Operating at 11:1 compression ratio, the engine incorporated a centrally located, cylindrical piston bowl and an off-axis, directed intake port. This study concentrates on the tangential (swirl) and radial (squish) velocity components during the compression stroke and the early portion of the expansion stroke. Measurements were made at low engine speeds (primarily 600 r/min) along two orthogonal radii at four depths within the piston-bowl's TDC volume. The mean flow pattern in diametral planes can be described as off-axis swirl with a moving center of rotation that varies with both depth and engine speed. Peak swirl velocities occur about 20 deg BTDC of compression. As the piston passes through TDC, squish deforms the swirl profiles and, near the bowl rim, produces a nearly reversible radial flow into and out of the bowl. Intake-generated velocity fluctuations decay slowly until just before TDC, when the fluctuation intensity shows a sharp peak consistent with production of turbulence near the bowl entrance.Keywords
This publication has 22 references indexed in Scilit:
- Laser Doppler anemometer measurements of mean velocity and turbulence in internal combustion engines1984
- A Numerical Study on the Effects of Fluid Motion at Inlet-Valve Closure on Subsequent Fluid Motion in a Motored EngineSAE International Journal of Advances and Current Practices in Mobility, 1982
- Direct-Injection Stratified-Charge Engine Computations With Improved Submodels for Turbulence and Wall Heat TransferSAE International Journal of Advances and Current Practices in Mobility, 1982
- Measurements of the in-cylinder flow of a motored four-stroke reciprocating engineProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1981
- Air Motion and Its Effect on Diesel Performance and EmissionsSAE International Journal of Advances and Current Practices in Mobility, 1981
- Multidimensional Modeling Applied to the Direct-Injection Stratified-Charge Engine—Calculation versus ExperimentSAE International Journal of Advances and Current Practices in Mobility, 1981
- An Experimental and Analytical Study of Engine Fuel Spray TrajectoriesSAE International Journal of Advances and Current Practices in Mobility, 1980
- Turbulent Air Flow in the Combustion Bowl of a D. I. Diesel Engine and Its Effect on Engine PerformanceSAE International Journal of Advances and Current Practices in Mobility, 1979
- Comparison of Model Calculations and Experimental Measurements of the Bulk Cylinder Flow Processes in a Motored PROCO EngineSAE International Journal of Advances and Current Practices in Mobility, 1979
- Development of a Predictive Tool for In-Cylinder Gas Motion in EnginesSAE International Journal of Advances and Current Practices in Mobility, 1978